How the Canon SX60 is in focus infinitely

The SX60 supports manual focusing, which is prone to misfocus or incorrect focus in low light or complex scenes. This is where manual focus comes in. To do this, in shooting mode, press the right button of the "Func Set" control dial once.

It's the button with a flower on it that says MF. Then select MF in the interface that appears, <>

Next, you can use manual focus, the focus distance is displayed on the right side of the screen, and use "func set" to control the up and down buttons of the dial to adjust (when you want to focus on infinity, press the up button all the way to adjust the focus distance to . You can also choose to zoom in on the focus area when focusing manually, and adjust the magnification with the right button of the "func set" control dial (that is, there is a lightning bolt sign, which is the button that usually controls the flash). At the same time, when focusing manually, the screen selects the sector that it thinks is in focus with a red outline.

It is also possible to press the MF button to change to manual focus while shooting, and the red outline mark of the focus indicator will not be recorded.

One trick is that most of the time, you don't need to be very accurate when focusing manually, as long as you are roughly in focus, and then press the shutter halfway at this time, and the camera will fine-tune the focus in a small area, and you can usually match it accurately. However, in this case, the focus area is forcibly limited to the center of the frame (when using this function, make sure that the "Safe Manual Focus" option in the menu menu is set to "On").

Canon SX60 is a telephoto machine, this kind of camera in order to simplify the structure, do not set a manual focus ring, the few that have a manual focus function, but also limited to manual fine-tuning with a switch, can not achieve pure manual focus, and SX60 does not even seem to have such a function, so you want to be the same as a DSLR, it is not possible to manually set the focus to infinity.

I don't know if you want to focus infinitely to shoot the moon, in recent years, the new telephoto camera, generally in the SCN special mode has a moon optimization mode, you can get good results, such as the picture below, Nikon's telephoto camera P610S shooting.

It must be related to the amount of aperture and focal length, and focusing at infinity is just the maximum depth of field at the aperture at that time, which is the so-called "hyperfocal length".

Theoretical information can be seen here, my space.

What affects the depth of field is the size of the aperture, the focal length of the lens and the distance from the subject, which has nothing to do with focusing, and the blur caused by not focusing is called out-of-focus effect.

Any camera can shoot infinity, the sun, the moon, and the stars, as long as the thing is big enough.

When you say you can shoot 100 meters, you should be able to magnify an object 100 meters away to the extent that you can see it clearly. There are three scenarios:

It's too small to see clearly.

This problem cannot be solved, the SX60 has a focal length of more than 1000mm, and the longest focal length of a telephoto device that ordinary people can use is just that.

You can see it, but it's not big enough.

Same as above, you can't zoom in until you've reached the limit, unless you get closer.

Large enough but fuzzy.

It could be blurring caused by hand shake, or it could be a focus issue.

You can use any file to take pictures, and you must be able to control the amount of **. T is your own control of the shutter, A is your own control of the aperture, M is the shutter of the aperture you control. The P stop is the combination of shutter and aperture that the control camera automatically gives.

You can shoot the moon in any of these 4 settings, preferably with a tripod. If you don't have a tripod, make the shutter fast enough, otherwise it may become blurry due to shaking.

Face priority focusing, auto-tracking focusing, **focusing, and free-movement focusing.

It's just a low-end telephoto model.

None of the machines of this grade are too fast to focus.

It can only be said that hehe :)

Nikon P900S and Canon SX60HS are both consumer telephoto cameras, with similar photo performance and image quality, Nikon's is slightly better, the main difference is that Canon's effective focal length is 21-1365mm, while Nikon is 24-2000mm, which means that Canon is wider at a wide angle, but Nikon shoots farther at the telephoto end.

Focusing is generally difficult in low light, so you can focus on a bright spot at an equal distance and then release the shutter according to your composition.