How to focus accurately in 60d, what is the reason why Canon 60D can t autofocus Manual focus works

See the instructions on focusing in the manual. The manual of the SLR is very important. Another is to practice more.

Canon 60D "Autofocus is only possible when manually set to "Autofocus" mode:

1. First, click the "Shutter Framing" button on the upper right corner of the camera to open the camera viewfinder, and mark the position with the red arrow in the figure below.

2. After that, click the "menu" menu button of the camera to enter the focus mode setting, as shown in the red arrow below to mark the position.

3. Select the focus method of "Tracking" on the "Autofocus Mode", as shown in the figure below.

4. After that, click the "SET button" at the bottom right to select and confirm the focus mode, as shown in the red arrow below.

5. After that, click the "Block Viewfinder" button to return to the shooting interface, and you can achieve automatic focus when taking pictures.

The camera manual focus selection is at the top right edge of the furthest back, there is a button marked as a four-point doji, after pressing, turn the dial wheel behind the camera shutter, you can change and select the focus point, such as live display shooting manual focus The specific steps are as follows:

1. Press the real-time display shooting button, fix the camera on the tripod, press the real-time display shooting button on the back of the camera, and start the real-time display shooting function;

2. Switch the switch to manual focus, switch the autofocus mode section opening switch of the lens, and select manual mode;

3. Adjust the angle of the rotatable LCD monitor;

4. Move the focus position, use the multi-function control button to move the focus point to the position where the focus needs to be closed;

5. Use the magnification button to enlarge the display, press the magnification button, and the magnified image can be displayed 5 times and 10 times in turn;

6. Manually do not focus, rotate the focus ring while observing the magnified image until the image display is the sharpest;

7. Press the shutter button to return to the full-screen display, confirm the overall situation of the image, and then press the shutter button.

:How do I set the Canon 70D focus mode? I'll tell you about it.

1. In AF (Autofocus) mode, adjust the lens focus mode to MF (Manual Focus) mode after focusing, lock the focus point, and recompose the shot. The advantage is that it is easy to operate, and the disadvantage is that it is easy to defocus when shooting dynamic subjects.

2. Set the camera to live view mode, that is, LCD frame mode, and click directly on the touch screen to select the focus focus.

3. Single-point autofocus (manual selection) and area autofocus (manual selection) can freely select 19 AF points, and the specific method is:

1) Press the AF point selection button so that the entire AF area lights up in red and enters the ready state.

2) (When holding the machine horizontally) Use the main dial when moving the AF point left and right.

3) Use the quick-control dial to move the AF point up and down.