Headset sound to play games is small. Why are the headphones so quiet?

By turning up the sound of the headset on the computer, you can make the phone louder when playing games.

The specific steps to increase the size are as follows:

1. Take win7 system as an example, face the taskbar on the desktop.

Right-click on the sound icon and select the "Recording Device" menu.

2. In the page that opens, double-click the microphone device that is currently being used by yourself.

3. In the open microphone device properties page, click the "Level" tab at the top of the page.

4. In the level setting page, drag the sound setting bar of the microphone device to the maximum.

5. Finally, click the "OK" button at the bottom of the page to save the settings.

If it's not that the headphones are broken, it's a problem with the settings, right-click on the small speaker in the lower right corner of the computer Click to turn on the volume control There is a volume control option There is a balance under the volume control, pull the balance to the middle ok If it doesn't work, still right-click in the lower right corner, click the second Adjust audio properties There is a speaker volume in the box, click it.

I'm the same as you, have you solved it? How was it solved?

It's not that the sound of the headphones is small, it's that the phone decodes the audio and reduces its decibels, so the sound of the headphones sounds relatively small.

The driver of an isomagnetic headphone is similar to a shrunken planar speaker, which embeds a flat voice coil into a thin diaphragm, like a printed circuit board, to evenly distribute the driving force.

The magnet is concentrated on one or both sides of the diaphragm (push-pull), and the diaphragm vibrates in the magnetic field it forms. The isomagnet headphone diaphragm is not as light as the electrostatic headphone diaphragm, but it has the same large vibration area and similar sound quality, it is not as efficient as the dynamic headphone, and it is not easy to drive.

Ring Iron Mix:

The ring iron headset is a dynamic moving iron hybrid drive sound earphone, with a single moving coil + single moving iron, single moving coil + double moving iron structure, the advantages of the moving iron unit is high electro-acoustic conversion efficiency, light vibration body, so high sensitivity, good transient performance, so that the original dynamic is difficult to perform, the most dynamic and instantaneous details are highlighted.

The low frequency and mid-frequency are naturally presented by the dynamic unit, giving full play to the advantages of good low-frequency extension of the dynamic coil and fullness of the mid-frequency and natural transition. The advantages and functions of the moving iron unit are mainly to undertake and supplement the high-frequency attenuation section of the moving coil, starting from the frequency division point of 6kHz, the moving iron unit is responsible for the high frequency, and the high-frequency range is extended to 30kHz.

Tools Materials: Computer, Headset.

1. Turn on the computer, plug the headset into the computer interface, right-click the taskbar sound icon, and then tap Sound.

3. In the speaker properties page, open the level bar, and then adjust the value of the realtek hd audio output slider to a higher position.

If you want to be quiet, buy good headphones.

There is noise reduction.

At home, wired headphones are larger than Bluetooth headphones.

On the outside, Bluetooth headphones are larger than wired headphones.

To reduce noise, go to **Jingdong to buy noise-canceling headphones.

Buy those big brands.

Niche brands don't.

Wired headphones. ok]

How much is the budget. > look at the expensive Bluetooth is definitely better than the cheap wired.

You can go to **JD to check it out by yourself.

Headphones such as Edifier QCY Beats will do.

The sound of the headphones is adjustable.

Hello, glad to answer for you. 1. The Bluetooth headset is damaged by the microphone, you can try to restore the factory settings to see, when charging and disassembling the honor power, press and hold the power button until the display light flashes. If it cannot be solved, it is recommended that it should be repaired during the warranty period.

2. It may be a problem with the direct connection with the mobile phone. You can go to the Bluetooth list and pair it again to see if it will get better. 3. You can change the mobile phone to connect and see if it is a mobile phone problem.

If none of the above solves the problem, the headphones are generally broken. 4. Clean the small hole of the Bluetooth microphone and use a dog tail grass or toothpick to get through. 5. If the signal is not good, you can try to stand in an open place or a high place when talking, and do not affect the reception signal in a narrow and closed space.

6. Increase the microphone volume control button on the Bluetooth headset to the maximum.

Apple uses Bluetooth headphones to play games, and the game sound is low because the Bluetooth headset microphone is not turned on loud. Bluetooth is an open, global specification for wireless data and voice communication that provides inexpensive access to fixed or mobile end devices based on low-cost, short-range wireless connectivity.

Introduction to Bluetooth

Bluetooth technology. The essence is to establish a common short-range wireless interface for the communication environment between fixed or mobile devices, combining communication technology with computer technology.

This further enables various devices to communicate or operate with each other in close proximity without wires or cables connecting to each other.

As a small-range wireless connection technology, Bluetooth can achieve convenient, fast, flexible and safe, low-cost, low-power data communication and voice communication between devices, so it is one of the mainstream technologies to realize wireless personal area network communication, and connecting with other networks can bring a wider range of applications.

Bluetooth is a cutting-edge, open wireless communication.

It is a kind of wireless network transmission technology that can enable various digital devices to communicate wirelessly, which was originally used to replace infrared. Bluetooth is a proximity connectivity protocol that enables secure, easy, and fast automatic communication between devices. Compared to other wireless connection methods, communication technology in today's world is developing rapidly.

First, the cause of the failure:

1. It is possible that the mobile phone has the possibility of headphone port current problem, which is a hardware problem of the mobile phone, and the headset can be replaced for inspection, 2. It may be that the headphone jack is not plugged in well, and the headphone plug can be rotated to detect.

3. There may be a problem with the headphone line, which is generally caused by the old damage of the line due to the winding of the wire, which generally appears at the back end of the plug and can be detected by shaking the headphone cable and the plug connection part.

4. Then there is the problem of the earphones themselves, which may be the current sound caused by the surrounding electromagnetic radiation, or it may be the current sound of the poor performance of the earphones themselves.

2. Solution:

First of all, check whether there is noise in the headset of the mobile phone, whether there is a problem with the headphone jack or a problem with the headset of the mobile phone. If it is the first one, then it is advisable to go to the customer service center to have it checked and repair the headphone jack. If it is the second one, it is recommended to replace the headphones.

Of course, in addition to these reasons, it is also possible that there is a problem with the phone itself.

There are a lot of friends when playing games when the other party feels that there is a current sound is very serious, affecting the friends to play games with the microphone, in fact, the computer can be set lightly to eliminate the current sound.

It could be a problem with the phone's vocal track.

It must be answered, just solved this question! This problem generally appears on the front panel, as soon as the graphics card is turned up, the earphones will sizzle, and the earphones will not appear when they are plugged into the back panel! This is because the CPU power supply line of the graphics card has electromagnetic interference with the sound source line, and the solution is to keep the sound source line on the front panel away from the CPU power supply line of the graphics card in the case, don't tie them together for the sake of beauty, and the sound source line is OK to go alone!

Try to avoid graphics cards! This solves the problem, no need to change the power supply, no need to change the headphones, no need to add a sound card!