Glass high temperature workshop cooling equipment, how to reduce the temperature of the workshop, re

If there is equipment with a high heat source inside the workshop, you can consider installing a negative pressure fan to realize the ventilation of the whole workshop and discharge the hot gas.

However, some workshops are not allowed to cool down, and if you want to maintain high temperatures, you can consider cooling the personnel separately, such as placing industrial mobile air coolers indoors and blowing them on workers.

If it is a high-temperature workshop, it can be considered: post fixed-point cooling and workshop negative pressure ventilation ventilation cooling.

Jiafeng ventilation and cooling equipment explained:

Post fixed-point cooling is an individual worker cooling, and a small mobile environmental protection air conditioner can be used.

The workshop can be ventilated as a whole, and Jiafeng industrial exhaust fan is used to discharge the stuffy gas and bring in fresh air.

The combination of these two methods is more economically feasible.

Here's what you'll see**:

Glass high temperature workshop cooling equipment can be installed negative pressure fan + environmental protection air conditioning, negative pressure fan can quickly extract high heat, harmful gases, dust and smoke, etc., environmental protection air conditioning has the function of ventilation, can be outdoor fresh air through environmental protection air conditioning filtering and cooling after a steady stream of indoor sends, at the same time the indoor dirty air discharge, keep the indoor air fresh environment. Negative pressure fans and environmentally friendly air conditioners also have the advantages of rapid cooling, low investment costs, energy saving and power saving, and large coverage area. It can help you solve problems such as ventilation and cooling.

The easiest way to save money is to add a large exhaust fan to the window! I've seen a lot of manufacturers do it this way! In this way, the air in the workshop will circulate quickly, and there will be a large amount of fresh air coming in when the air convection is fast, so that some harmful gases can be discharged as soon as possible, and second, it can better dissipate heat.

There is always fresh air flowing in the workshop, which is a great thing for every worker!

If the temperature in the workshop is too high, you can add ice cubes, you can also add air conditioning, and you can increase the fan on it! Or a shade net!

The scheme of evaporative refrigeration system + exhaust fan for factory is better. The cooling scheme needs to be professionally designed and calculated to achieve the best results.

The cooling range of the Eucold evaporative refrigeration system can reach 8-12. The temperature in the Brembo factory in Nanjing in the summer has been reduced by 10 after the use of the Calioma Eucold evaporative refrigeration system.

If the temperature of the workshop is too high, the method of overall cooling and mobile post cooling can be adopted. Or to the left pipe of the fan or to move it gei to cool down.

The equipment recognized as better for cooling in the workshop is: negative pressure fan and environmental protection air conditioner.

Negative pressure fan is a type of fan with large air volume and low energy consumption, which is installed with windows and walls, and quickly discharges the air inside the workshop to the outside when it is opened, so as to take away the heat, odor and bad gas in the air.

Negative pressure fans are also known as: negative pressure exhaust fans, negative pressure fans, etc., and the better brands are: Jiafeng, Detong, Kyushu, etc.

Environmental air conditioning is a kind of air conditioner without compressor, which uses water evaporation to absorb air heat, turns the air into a comfortable cool breeze, blows into the workshop to improve the stuffy air, and at the same time tries to let the cool breeze blow on the personnel, so as to improve air quality, environmental comfort and odor while cooling down.

Environmental protection air conditioners are also known as industrial air coolers, water curtain air conditioners, etc., and the better brands in the industry are: Aolan, Jiafeng, Keruilai, etc.

Negative pressure fans and environmental protection air conditioners can be used separately in the factory workshop, or they can be combined with one in and one out at the same time to form a cycle. The main features are low energy consumption, wide range, no need for a confined environment, cooling and improved environmental comfort.

It should be noted here that no matter what kind of plant cooling equipment, don't be greedy, because there are many low-cost hosts on the market, and the quality effect is difficult to meet the standards.

There are several kinds of large-scale workshop refrigeration and cooling on the market, traditional air conditioning, environmental protection air conditioning, and air conditioning, among which Foshan Hengyimei evaporative cold air conditioning is the most widely used on the market, and the distance is characterized by the same cooling capacity as traditional air conditioners. In the later stage, it saves 30%-50% more electricity than traditional air conditioners15% less electricity than ** air conditioner.

Of course, with the cooling equipment of Hebei Guoen Refrigeration Company, the company has signed a contract to guarantee the cooling effect, and if the cooling effect is not refunded, hurry up to consult online.

Consult Hebei Guoen Refrigeration online, their company's plant cooling equipment is very famous, and there is a contract to ensure the effect.

1. Use negative pressure fans to pump out high-temperature stuffy air to cool down, install negative pressure fans on the walls and windows of the workshop, and force a large number of high-temperature sultry air gathered in the workshop to be discharged outside the workshop, so that the negative pressure situation is formed in the workshop, forcing the air outside the workshop to pour into the workshop for convection ventilation, reducing the content of high-temperature stuffy air in the workshop, and improving the speed of air circulation in the workshop.

2. Use the water curtain system to refrigerate the air outside the workshop for the second time and enter the workshop to cool down: the cooling water curtain system is installed on the opposite side of the negative pressure fan or the window on the side wall of the workshop, and the supplementary air entering the workshop is cooled by the cooling water curtain for the second time, and the air with lower temperature is forcibly introduced into the workshop for cooling by the negative pressure fan, and this method has the best cooling effect when used with the negative pressure fan.

It should be noted that the amount and speed of the air in the water curtain cooling system should be enough to supplement the amount and speed of the high temperature and stuffy air discharge in the workshop, and the sealing of the workshop should be done well, and try to ensure that the air entering the workshop passes through the cooling water curtain system.

3. Use environmental protection air conditioning, cool down the air outside the workshop and send it to the workshop for cooling: the environmental protection air conditioner is installed on the outer wall of the workshop, which is to supply air to the workshop through the fan, and the fresh air outside flows through the wet curtain soaked in water, and the air is in full contact with the water while absorbing the sensible heat in the air focus, so as to achieve the purpose of cooling, ventilation, dust removal, and increasing the oxygen content of the air in the workshop, this scheme is especially suitable for high temperature and crowded places.

4. Use large industrial fans, ventilation, cooling, ventilation, drying and dehumidification, cool in spring and autumn, and comfortable in summer and winter: the airflow generated by the rotation of the industrial fan is pushed to the ground in a cone shape from top to bottom, and flows along the horizontal direction after reaching the ground, and the horizontal airflow of the side barrier or adjacent fan is pushed up to the roof, so as to strengthen the air circulation in all directions and from multiple angles.

The flowing air can be quickly exchanged with the outdoor fresh air through the doors and windows, reducing the retention of turbid gas in the workshop, and the gentle breeze it continues to speed up the evaporation rate of sweat on the surface of the human body to produce a cool cooling effect, which largely solves the conflict between air conditioning cooling and high energy consumption, and achieves the effect of small investment and large return without installing air conditioning system.

There are two ways to cool down the plant: natural cooling and equipment cooling.

1. Natural ways include sprinkling water on the floor of the workshop, and opening windows for ventilation. At present, there are also enterprise workshops that directly purchase large ice cubes to achieve the purpose of plant cooling. In addition, it is possible to build a trellis on top of or around the workshop to plant rattan plants, or to plant trees around the plant to block the sun.

However, the above natural methods are slow to work, and the effect is not obvious, and can only block the sunlight and cannot absorb the heat generated inside the workshop.

2. The equipment cooling method is mainly through direct cooling equipment and ventilation cooling equipment to achieve the purpose of plant cooling. Direct cooling equipment includes air conditioners, wet curtains, etc. Ventilation and cooling equipment is mainly a variety of ventilators and fans.

The factory workshop is equipped with a fan, and the fan can be said to be the most economical, fast and practical for the plant. However, if you want to cool down better, it is recommended that the die-casting workshop keep a high-power horn fan prepared in front of each machine. The effect of the cooling ice fan in the workshop is also okay, but at high temperatures, the wind blowing out is often hot air.

To keep the wind cool all the time, prepare a large plastic bucket with large ice cubes in front of the fan. The wind blowing in this way will be slightly cool. As for the ice, it can be unified to the market for wholesale of factory personnel.

You can also install a water cooler, which is more advanced than using a fan, and it is simpler than adding ice, you don't need to buy ice, the cost is only a temporary expensive, but it will be more practical than the above methods, and factories like die-casting factories can consider cooling in this way.

Install industrial air conditioners. Workshop air conditioners are mainly divided into water-cooled air conditioners and water evaporation air conditioners (wet curtain air coolers). The cooling principle of water-cooled air conditioning is that when the water evaporates, it takes away the surrounding heat, so that the temperature of the air is reduced.

Scope of application: For places that require high humidity (such as textile, planting, etc.), part of the indoor installation can be used in the design; For places that require low humidity, low humidity and high cleanliness, please consider whether it is suitable for use.

In a suitable temperature environment, the heat generated by the equipment is absorbed or discharged in time, so that the equipment is maintained in a stable temperature environment, which can increase the service life of the production equipment and virtually save the next maintenance and renewal cost for the enterprise.

1. Choose a mobile cooling fan to cool down employees' jobs, the workshop area is large, and there are few employees, this method can be used, the mobile cooling fan does not use freon refrigerant, there is no chemical pollution, no exhaust gas and waste heat emissions, the cold air blown out is cool and fresh, relatively energy-saving, the use cost is very low, no installation is required, and it can be used by plugging in.

2. Install a negative pressure fan on the wall or window in the high-temperature and stuffy area of the workshop, and quickly discharge the high-temperature and sultry air gathered in the workshop out of the workshop, so that the air circulation can achieve the effect of ventilation and natural cooling, which is suitable for large workshop area, many employees, and poor overall air circulation in the workshop.

3. Install a spray cooling fan in the hot and stuffy position of the workshop, increase humidity to the air by atomizing the water, and absorb the heat of the air to reduce the ambient temperature. It is suitable for workshops with dry air and serious high temperature and stuffiness.

4. Install an environmental protection air cooler on the window of the workshop, cool the outdoor fresh air through the cooling wet curtain in the machine, and send the cold air into the workshop, which can increase the freshness of the air in the workshop and the oxygen content of the ambient air, and improve the speed of air circulation in the workshop.

Here's how:

1. Install an evaporative air cooler

According to the natural physical phenomenon of "water evaporation absorbs heat, and the evaporation area affects the evaporation efficiency", the air is supplied to the room through the fan, so that the negative pressure is generated in the machine, and the fresh air outside flows through the wet curtain soaked in water, and the air is in full contact with the water and absorbs the sensible heat in the air at the same time, so as to achieve the purpose of cooling, ventilation, dust removal, and increasing the oxygen content of indoor air, which is especially suitable for high-temperature production workplaces.

2. Strengthen natural ventilation and cooling

The specific method is to open the original ventilated doors and windows in the workshop, use the natural wind outside the workshop to flow through the doors and windows, take away the high temperature in the workshop by the way in the process of natural air flow, reduce the amount of high temperature aggregation in the workshop, the area is small, the doors and windows are more, the workshop with good natural ventilation conditions This method is very effective, and the effect is relatively poor for the workshop with an area of more than 300 square meters and poor natural ventilation conditions, and the advantage is to save money.

Precautions for workshop work in the summer

1. Regularly distribute heatstroke prevention and cooling products.

2. Try to avoid the high temperature period at noon when operating, and prepare cooling products if you really need to work, and limit the operation time.

3. Replenish water, develop good drinking habits, usually the best time to drink water is after waking up in the morning, usually pay attention to eating more fresh vegetables and fruits can also replenish water.

4. Enhance nutrition: You can drink more tomato soup, mung bean soup, soybean milk, sour plum soup, etc.

5. Prepare heatstroke prevention drugs, and departments and teams are responsible for equipping heatstroke prevention drugs on site