How to remove mildew spots on the painting shaft, how to remove mildew on the painting?

If it's a general painting, just do the general treatment. Method: Buy a bottle of bleach at the detergent counter of a department store; Dry the painting and dust off the mildew with a cloth, be sure to clean it; Then spray bleach on the line.

After such chemical treatment, the paper becomes brittle, which greatly shortens the life of the painting. 2. If it is a precious painting, please ask the teacher of the framing shop to pay (you must find the old one, only to have this experience) to re-uncover, and wash off the mildew when unmounting. This treatment does not damage the original work, which is equivalent to curing the disease, and generally does not affect the life of the work (after all, it is moldy); and restore the work to its original appearance.

This kind of framing restoration** is twice that of general mounting. 3. Uncovering, washing calligraphy and painting is a meticulous work, but also a technical work, you have not done it, if it is a more expensive painting, it is best not to do it yourself. 4. In the future, all Chinese paintings should be taken out and hung once or twice a year, for half a month and 20 days each time, so that it can be breathable.

Chinese paintings framed in glass, plastic film, etc., are also dangerous and prone to mold if they are not worn in a cool fashion for many days in a row. If there is any of the above conditions, take out the glass frame and dry it when the weather is high and cool; If it is a plastic film, it should be re-applied after drying.

For ordinary paintings, just do general treatment. Dry the painting, dust off the mold with a cloth, and spray it with bleach.

If it is a precious painting, please ask a professional master in the framing shop to deal with it.

Rub a little soap on the mold spots, then sprinkle some white flour and finally dry with paper.

If the shaft can be removed, it can be washed, and if it can't be removed, you can buy Shunmei clean wipe.

You can dry the words with bleach or try with toothpaste.

The mold spots on the scroll can be covered with white paint.

Rub it with white vinegar dipped in water.

You can try a cleaner but it's best to ask the boss if it's corrosive first.

Try applying a little toothpaste.

It's definitely a reminder that you're going to get a new one.

Here's how to treat the mold on the painting:

1. New mildew can be cleaned with a soft brush first, and then washed off with alcohol.

2. The old mildew spots are first coated with light ammonia and placed for a while, then coated with potassium permanganate solution, and finally wiped with sulfur solution.

3. You can use a little mung bean sprouts to wipe the mold spot repeatedly, and the mold spot can be removed.

The "appearance" of calligraphy and painting is related to value. A good calligraphy and painting is often greatly reduced due to mildew and stains. Therefore, it is recommended that units or individuals who collect paintings and calligraphy should give more consideration to the influence of environmental factors on display and hanging, and try to prevent problems as much as possible.

Brushing with a brush is absolutely not a no-no.

That will break the core paper.

Influence the collection and aesthetic value of the work.

If not too severe.

After removing the frame, gently sweep it with a feather duster.

If it is more severe.

It can be sent to a framing shop to be re-mounted.

Because it is a famous calligraphy and painting.

It's best to find a more formal framing shop.

If that one is genuine.

It's worth a little silver.

Don't take it seriously.

I'm sorry if I can't read it

How to deal with calligraphy and painting stains:

1) Mildew should be wiped with 75% alcohol and absorbent cotton and absorbent paper.

2) Ink stains, 20% hydrogen peroxide plus absorbent cotton and absorbent paper to wipe off.

3) Dirty stool, 20% hydrogen peroxide plus cloth and absorbent paper to wipe it.

4) Return lead, 20% hydrogen peroxide plus absorbent cotton and then add absorbent paper to wipe.

5) Oil stains, heated with an iron and padded with absorbent paper underneath.

Problems that need to be paid attention to when looking at paintings:

1) Wear gloves on your hands when holding paintings;

2) Do not cough when you are very close to the painting;

3) Don't smoke;

4) Don't hang the painting for a long time, it is easy to deform after hanging for a long time.

Either bask in the sun, wipe it clean with a paper towel when it's dry, or return a drawing board, the weather has been humid lately, so you must definitely take good care of it.

1. Before cleaning up mildew, you should first observe whether the books are dry. If there is a feeling of moisture, let it air dry in a ventilated place before treatment.

2. If there is no problem, take the moldy books outside, dip a cotton swab in ammonia and gently wipe the mold until the mold is removed.

Note: Don't wipe too hard, the moldy book paper is fragile, so as not to break the book.

How to deal with ink spots, mildew and other stains on calligraphy and painting? Here's how.

1. Anti-aging. The aging and brittleness of books does not depend on the length of time, but on how to deal with the acidic substances contained in the pages. It has been found that some of the books published in Europe in the 15th century have survived to this day because the paper was made of cotton and linen heads, had a neutral pH, and contained calcium carbonate, which prevents acid formation.

In modern society, the circulation of books is very large, and it is obviously impossible to make paper from cotton and linen, so most of them use wood as raw material. The plant fibers in the paper lose their strength and adhesion when hydrolyzed by acid, and the acid in the paper mainly comes from the aluminum sulfate that sizes the paper. When the paper starts to get wet, the aluminium sulphate begins to produce sulphate and hydronium ions, and finally forms an acidic substance that erodes the paper.

Sulphur oxide and cyanide oxide in polluted air can also react with water or plant fibers to produce acids. Therefore, to prevent books from aging and becoming brittle, the main thing is to remove the acid in the paper. The most common method now is to soak the book in a solution of magnesium bicarbonate or calcium bicarbonate and then dry it.

By doing so, you can get the acid in the paper and prevent the acid reaction from happening later.

2. Insect control. Sometimes small insects grow on books, which seriously jeopardizes the lifespan of books. The way to prevent insects is:

1. The articles in the collection should be clean and dry, and well ventilated; There should be no cracks in the bookshelves, walls, or floors; 2. The temperature of the collection of books and articles should always be kept at 6-20 degrees, and the humidity should be kept between 50% and 60%; 3. The collected books should be moved frequently, even if they are not commonly used, they should be turned regularly; 4. On the bookshelf or in the bookcase, you can put some wrapped sanitary balls.

3. Decontamination. Stained books will not only shorten the life of the book, but also affect the effect of reading.

The method of decontamination is:

1. Degreasing. Put a piece of absorbent paper on the oil stain and gently iron it several times with an iron to absorb the oil. It can also be erased with a few drops of a mixture of gasoline and magnesium oxide.

2. Ink removal. At the bottom of the page stained with ink, first pad a sheet of absorbent paper, then soak the stain with 20% hydrogen peroxide solution or potassium permanganate solution, then put a piece of absorbent paper on the top of the page, and press a heavy object, and the ink will disappear after drying. If brown spots occur with a potassium permanganese solution, they can be removed with oxalic acid or citric acid solution.

3. Remove mildew. Dip cotton in ammonia and gently rub the mold until it is removed.

4. Remove finger prints. Rub your fingerprints with soap, then wipe off the soap with a damp cloth, and finally line the pages with absorbent paper to blot the water. 5. Remove fly feces. Dip cotton in vinegar or alcohol and gently rub fly stool until the stain is removed.

For other general stains, as long as you carefully wipe it with soap, then wipe off the soap with a damp cloth, and then line the book with absorbent paper to absorb the water, you can get a more satisfactory effect.

A few small ways to remove mold from books:

The first situation: mild mold: if there is only a slight mildew spot, you can spread out the book to dry in sunny weather, and the mildew spot can be dried and brushed off with a brush;

The second situation: mildew clumps: if the mildew is more serious and clumpy, you can use a cotton swab or cotton ball dipped in alcohol, gently wipe it in a small amount of moldy places many times, and then dry it.

The third situation: serious mold: For books with serious mold, the following two methods can be used:

Method 1: 1First, make sure that the books are dry and free of moisture, can be ventilated, and dried in the sun.

2.Use a clean rag to wipe off as much mildew as possible, or use an eraser to wipe off the spots on the book, pay attention to the strength to avoid too many times or too large to cause damage to the page.

3.Try to wipe the remaining untreatable parts with a soaked dry towel and wipe off the residue in water, but don't get too wet, 4Finally, it should be dried by ventilation, light, etc., and it is necessary to pay attention to turning the pages by hand as much as possible in this process, or other items to separate the pages of the book, so as to avoid the paper on the book sticking together.

Method 2: 1Thoroughly soak in alcohol (this is necessary to restore dryness and odor).

2.Press it firmly with plasterboard or porcelain tiles.

3.It dries out quickly (no moisture remains after the alcohol evaporates) and is as smooth as new, no insects, and the musty smell disappears.

If you already have moldy spots, ......This is not like clothes that can be washed ......I had to replace the place where the books were stored with a dry and ventilated place, and take them out to dry when there was a sun to see if this would prevent the mold from spreading to the other pages. Take toilet paper and wipe it off.

When the weather is better, go out to dry, and then wrap it in plastic while it is hot, and you can keep it for a long time after a few days!

If the weather is good, put it in the sun to dry, and then wipe it off with a soft cloth or paper towel, if it can't be removed, use an eraser. Of course, this is for a small area, and if you have a collection of books, it will not be easy to do.

In short, basking in the sun and letting the mildew dry up is always right, and it is easy to fall when it dries.

Keep your bookstalls open in a dry and ventilated place, and take them out to dry when the sun is shining.

It can only be so.

Try keeping the book in the fridge for a few days.

The best way to do this is to dry in the sun.

Here's how to remove mold spots from a plush doll:

1. Use coarse salt dry cleaning method. Start by taking out a sturdy plastic bag.

2. Then take out the plush toy and coarse salt. Place the plush toy in a plastic bag with the coarse salt, then grab the drop-in and shake it vigorously for a few minutes.

3. After a few minutes, you can find that the coarse salt turns black, and then the plush toy becomes clean.

4. Baking soda dry cleaning method. Take out the baking soda.

5. Put the baking soda and the plush toy into a plastic bag, then grab the buckle and shake it vigorously for a few minutes, and you can find that the baking soda has turned black after a few minutes. Then use a hair dryer or vacuum cleaner.

Remove baking soda from stuffed animals.

After that, it was found that the stuffed animal had become clean. This method is more suitable for larger plush toys and plush toys that make sounds.

To remove mildew spots from plush dolls, the materials you need to prepare include: white wine, toilet water, water, watering can, and hair dryer.

First, pour an appropriate amount of liquor into the watering can, and the alcohol of the liquor can play a role in sterilization and disinfection.

2. Then pour in an appropriate amount of toilet water, which can play a role in increasing fragrance.

3. Then pour in an appropriate amount of water and shake evenly.

4. Spray the mixture on the doll.

5. Finally, use the hot air of a hair dryer to dry it, so that you can remove the mold spots on the plush doll.

If it is not very serious, brush it dry with a brush, then dry it with a hair dryer and then add sun exposure.

In general, do not wash the doll frequently, because if the sun does not dry, the inside of the plush toy is damp and easy to breed bacteria.

If the hair is serious, you can see if the doll label can be machine washed, if it can be operated normally as washing clothes, if there is no machine wash icon, do not machine wash but choose hand washing, one side of the plush toy is damaged!

Put the stuffed animal in a sturdy plastic bag, buy a packet of coarse salt, shake it together for a while, and then take it out and it should be better.

Soak with potassium permanganate, pay attention to the proportion and time of soaking, don't soak it.

Wipe with alcohol and sunbathe.

Mold Removal Method:

1. Rice water.

It takes a longer time to use rice water to soak clothes with mold spots, because the protein in rice washing water can adsorb some mold, so it can remove lighter mold spots.

2. Alcohol cleaning method.

Mold spots on clothing can be exposed to the sun first, then cleaned with a brush and then washed off with alcohol.

3. Mung bean sprouts.

Mold spots on clothing can be exposed to the sun first, then cleaned with a brush, then washed with alcohol, or scrubbed with mung bean sprouts.

4. Thick soapy water.

After soaking the clothes contaminated with mildew in thick soapy water, take them out with soapy water, let them dry in the sun for a while, soak them several times, and then rinse them with water after the mildew is removed.

5. Aerobic laundry detergent.

Soak and wet the moldy garment in an aerobic laundry detergent. Aerobic washing is a laundry detergent that inactivates mold and removes musty odors, which can greatly reduce mildew stains on fibers or greatly lighten their color.

6. Vinegar + milk.

Washing clothes in water with a small amount of vinegar and milk can remove mold.

7. Fresh ammonia + potassium permanganate solution + sodium bisulfite solution.

The plaques were first coated with light ammonia, left for a while, then coated with potassium permanganate solution, and finally treated with sodium bisulfite solution and washed with water.

If the mold grows on the wall, people can take a damp cloth dipped in water to wipe their walls repeatedly, and if it is very difficult to dispose of, people can choose to repaint the house. However, if there are some mildew spots on the clothes, they can only be treated by washing, and it is difficult to completely remove the mildew by general washing methods, so you can take some special detergents, or choose to rub vigorously to remove them.

First, the treatment of mildew When people's clothes appear mildew, you can choose to soak the clothes as a whole, which can effectively remove these substances. Of course, when soaking clothes, try not to choose to soak them in water, people can choose to use rice washing water or add some alcohol to soak, these substances can remove mildew from the small structure of the clothes. After soaking for 1 or 2 hours, or about a day, people can rub the moldy area with their hands and then rinse the place with water.

If the effect is not obvious, it can be repeated until the mold is completely removed.

Second, quickly remove mildew Of course, the above methods are relatively slow, if people want to remove these mildew as soon as possible, you can apply some milk on the mildew, or the white vinegar we usually eat. He can remove mildew in a short time, and people use very little amount when applying it, and the smell is a little better than that of alcohol and rice water. People can easily rub their clothes to remove these mildew, and they can also use this method to remove the yellowing parts of the clothes.

For some mildew on other furniture, people can remove it with daily cleaning methods, and they can use cleaning agents to clean it, which is easy to see.