-
The oil of 0w20 should not exceed 3000 rpm in long-term operation, and the speed of Toyota series cars that generally use this oil should not exceed 3000 rpm when the speed does not exceed 120 km/h on the highway. If you often exceed 4000 rpm for a long time, it is better to choose a higher viscosity value oil.
-
New Alto needs 3 liters to change the engine oil, the best viscosity can be selected 0w-20, the original factory is semi-synthetic, if you are willing, you can consider changing to Toyota pure brand fully synthetic engine oil SN grade (0w-20, gold bottle), this oil is very suitable for the new Alto, ** will not be particularly expensive.
In addition, 1 bottle of 4 liters of antifreeze and 1 liter of brake fluid.
Since the new Alto uses electronic power assist, there is no need to change the power steering oil.
-
The oil dipstick should be used as the standard, whether the oil needs to be changed, is to judge the oil dipstick as the standard, within a certain mileage, use the oil dipstick to measure to see if the minimum value is reached, and when the minimum value is reached, you need to add oil.
Even for the same car, the amount of oil consumed in a certain mileage is not necessarily the same, because there are many situations that affect the consumption of oil, such as:
1. The type of engine oil (ordinary, semi-synthetic, fully synthetic).
Ordinary engine oil is changed at 5,000 km, semi-synthetic is changed at 7,500 km, and fully synthetic is changed at 10,000 km.
2. Driving conditions.
Frequent acceleration, deceleration, low-speed driving and the environment in which the car is used, long-term high-speed driving, etc., will affect the consumption of engine oil.
3. Fuel quality.
Poor fuel quality is easy to form carbon deposits, which will lead to the jamming of the piston ring for a long time, and the oil will flow upward into the combustion chamber from the gap between the piston and the cylinder wall, resulting in fast oil consumption.
4. The age of the vehicle.
In the final analysis, the car is still mechanical, and it will naturally age and damage after a long time, and of course, the valve oil seal is damaged or hardened and aged, which will also affect the consumption of engine oil.
Changing the engine oil is not only because of consumption, but also due to the time and environment, which causes the oil to deteriorate and needs to be replaced, which refers to the environment including the external environment and the environment in which the oil works. First of all, the external environment, high temperature, cold environment will lead to oil deterioration, or some places with large wind and sand are also easy to bring some external impurities into the oil working environment, resulting in deterioration.
The reason for the time is that the vehicle is not used for a long time, and it deteriorates due to oxidation, coupled with the air quality in our country and a large amount of exhaust gas inhaled during daily traffic jams, for a long time, due to chemical reactions, the oil deterioration rate will be accelerated.
-
Different models have different sizes of oil pans, so the amount of oil required is also different
Generally, cars are about 4L, medium and large cars, and mini cars
Please refer to the maintenance manual for details
-
It depends on what model your car is, the size of the engine has a lot to do with the amount of oil, and the general car oil is about 4 liters.
-
It is necessary to change the engine oil once, so the commercially available engine oil is 4L.
-
Whether it is adding new engine oil after changing the engine oil, or adding it after the oil is lost, use the oil gauge that comes with the car itself as a measuring tool, pull out the measuring tape, wipe the attached oil with a cloth, reinsert and pull it out: the oil volume exceeds the lower limit line, and the maximum does not exceed the upper limit line as the standard.
Don't think about how many litres you have, it's the standard for your car's oil volume. If the upper limit line is exceeded, it is easy to squeeze the oil seal as the engine heats up during the driving of the car, resulting in oil leakage.
-
Three and a half liters to four liters means that four liters of oil can't be filled up in a barrel.
-
Normally, the normal maintenance of the general car model basically uses the number 5W-30 40 more.
-
Hello, most of this engine oil is the engine oil used in Honda brand models, semi-synthetic engine oil,
-
New Alto uses the general kind of engine oil, about 160 200 pieces, which is enough, and the brand doesn't matter, the old brand of Shell is a little more famous, and Kunlun's is also good
There are many metal surfaces in the engine that rub against each other, the role of the engine oil is only to prolong the service life of the engine to lubricate, clean, seal, reduce friction, etc., pay attention to the oil is for the fast-moving engine, you just need to often look at the oil is not enough, do not reduce the oil on the line, when the maintenance must let him put all the waste oil and then increase the size of about half a barrel of new into the cleaning, clean the oil after the leakage and then add new in.
-
Suzuki 4S recently changed to Guangzhou Nippon Stone as a maintenance oil supplier, but the cheapest mineral oil is still Kunlun, don't use that SF 15W-40 garbage oil, it will damage the engine after a long time, I don't know how Suzuki will use this kind of oil that has long been expressly prohibited.
The 0w-20 engine oil of the new Nippon Stone is still good, and it is the cheapest fully synthetic (it is also said to be semi-synthetic) in the current car factory channel.