Photo shop head changing tips

Changing the avatar is not just casual, you have to pay attention to the proportion and overall harmony, often in some places such as shopping malls to see some processors changing people's avatars, but many people feel very awkward.

Technically, I don't think it goes without saying, everyone does, but I just want to say that it is important to pay attention to the proportions! Whether it's a head change or a face change, this comes first. Secondly, the overall harmony is whether the head and body are in harmony (colors, expressions of the characters, movements of the body, and clothing).

Finally, the color of the head is consistent with the body.

I have always been very strict in this regard, I can introduce a little secret to you here, because changing the avatar is like we painting, from the beginning of the operation to the end in fact, some places are not very harmonious, but because often look, so can not see the vision has been accustomed to, then you may as well take a mirror to the computer screen, and then observe whether the image in the mirror is appropriate, such as the proportion, color, etc., in general, you will immediately find the inappropriate place, and then modify it. (Actually, this is a painting that my teacher taught me when I was studying art to observe my own drawing.) ）

Changing the head is actually quite simple, as long as the other party's head is copied over, the selection should be a little larger, do not choose exactly, and then use the eraser to slowly erase the excess part, and then expose the source image, use imitation, stamp tools to remedy it, and finally use the color scale to adjust the contrast, to see the overall effect.

I'm not a master, but I can change my head, and if I change my head, I should also change my neck, and my collar should be neat, and my skin color sometimes has to be adjusted, and the most basic thing is not to be too disproportionate to my body, or you can give a ** and I'll help you change it 373350410

Technology is important, but I think the most important thing is to choose well. If the lighting doesn't match at all, no matter how high the master is, he won't be able to change a convincing picture, unless he draws one himself.

Replace the avatar in Photoshop, often use the magic wand tool to pull the replacement area, or use the cropping tool to crop, if you want to be more precise, you can use the pen tool to outline the avatar, after hooking the banquet, open the ** you want to replace the avatar, click the change screen mode button in the quick toolbar on the left to switch to a window mode to open, and then select the move tool, pull the avatar you hooked into that **, and place it in the **face position, Then select free transformation in the menu to adjust the position and size of the year's Xiang Ant avatar, if you want to be more natural, use a straw to absorb the original character ** color before moving the avatar, create a new blank layer in the layer after replacing the avatar, select the brush tool to care about the face of the avatar, select the color in the mode, if there is still a deviation, you can adjust the brightness contrast and color saturation or color level in the image menu.

Open it**.. Then use the pen tool to select and modify the avatar. Then turn the path to a selection. You can modify it.

Change the person's avatar or body in the photo shop or replace another person's face on an original person's **, the most important thing is (the avatar is changed to the body, or the body is replaced by the avatar) The proportion of the posture and the avatar, the body movements of the avatar and the posture are basically consistent, and other issues such as skin color can be modified, I suggest that the face is changed, so that you only need to find a relative consistency with the original **limb**, and put the face of the replaced person in the preparation ** for a slight adjustment, Or trim with a tool such as an eraser, and then adjust the color between the two coatings to tend to be the same;

To change the avatar, I said that the most important thing is that the proportion of the posture to the avatar, and the body movements of the avatar and the posture must roughly match. To change the face, first of all, make sure that the facial contours between the two coincide with the body movements. In this way, the characters will not be deformed after the change, and it is difficult for people to distinguish the authenticity!

It's a delicate job, which is about overlapping two photos.

Adjust the position size.

Remove the top layer excess.

Adjust the brightness of Hue Equal.

It's too simple, how can you use such a professional software as ps.

1. First of all, find two ** with similar face shapes, such as the following two stars**, Jackie Chan and Liu Yifei. There is no disrespectful meaning, please don't be embarrassed by the fans.

2. Then create a new blank layer in Photoshop, put ** in the blank layer, as shown in the figure, 3. Then open the face of another person in PS**, and crop out the appropriate size, 4. Drag the cropped** to the face of the person who needs p, adjust the size, so that the face size is consistent, 5. Adjust the transparency of the (Jackie Chan) face, reduce the transparency, and then make the eyes, noses, and mouths of the two faces basically aligned, as shown in the figure, 6. Then select the eraser tool, Set the hardness to 0, and then set the flow rate to about 30%, as shown in the figure, 7, use the eraser tool, wipe off all the unwanted things next to the face, leaving only the facial features, 8, and then you can adjust the opacity higher, which will make the ** clearer and will not coincide so obviously, 9, fine-tune the curve, the ** of the two want to approach, of course it is impossible to be exactly the same, and further operations are needed, because the skin tone is not the same, 10, and then select the blue channel, By adjusting its skin tone to be almost similar, the effect is much better, 11, and then some unsatisfactory parts are erased through the eraser, and the final effect is as shown in the figure, and it feels more realistic.

Using Photoshop to swap a person's head for another person's head is as follows:

1. Open two different characters** and use "Multilateral."

The lasso tool "picks out the head of one of them," - copying;

3. Use the "Brush Tool" and white to smear off the head of the original **Master, and adjust the **color of "Image - Adjustment - Hue Saturation";

4. Establish a "layer mask", use a black and soft-edged round brush to smear around the character's head, and complete the image dissolution.

Use the magnetic lasso tool to hook the head out, before hooking, it is best to set the feathering parameter to 2 3, and then use the move tool to drag the hooked head to the place where you want to drag.

Use the pen tool to put A's circle on it, then use Ctrl+Alt+D to feather it, then copy it and move it to B's head, if B's head is more hit, use the eraser tool to erase the excess parts of B's head.

1. Open Photoshop and circle the head with a pen tool;

2. Press the shortcut key "Ctrl+Shift+I" to load the selected area;

3. Select the moving tool;

4. Move to another **;

5. Select the "Free Transform" tool;

6. The color level adjustment can be completed.

It's very simple, you can go to iQIYI to watch the tutorial.

This is the "head swapping" of PS. Method:

Step 2: Use the PS tool to hook the head that needs to be replaced, drag it directly to another **, align the position of the head, and the edge part can be carefully modified with tools, which requires experience to leave no traces.

Step 3: After confirming that it is correct, merge the layers and save them as a new ** to complete the head swapping operation.

Open ps,Open the two pictures together,First use the selection tool to deduct the head in the ** that you want to move the head,After selection, drag the head to another **,Put the position,Then adjust the overall save OK。

Grafting, which requires patience and skill! I'll send you a tutorial to see how detailed this is, but it's best to understand the functions of Photo Shop before PS! This software is so powerful that you can't even learn it.

The Locking tool circles the face of one of them, then cuts, duplicates, moves, resizing, morphs, grads, etc., on the other to make it look harmonious.

Learn PS tutorials, and now the best PS tutorial site in China should be Siyuan Design Forum.

Here are some of the experiences that I have gained in the process of learning PS, I hope it will be helpful for you to learn.

If you are a new friend, you can read several sets of newcomer posts recommended by moderators on the forum.

One is Photoshop Basics Tutorial – I'm a beginner, how do I get started?

Both of these tutorials are boon for new friends to learn.

If you want to improve, you can practice in the darkroom area of Siyuan, and contact some of your favorite example tutorials in the advanced tutorial area and ps** area of Siyuan.

In continuous practice, your PS skills will gradually improve.

You can also participate in some PS activities of the forum, which are helpful for your own development.

I hope the landlord can give me an answer.

PS face swapping is really magical, and the method is actually very simple. Move the face selection to the face of the person you want to replace, create a selection, shrink a few pixels, and then delete. Select two layers and use the automatic blend layer to change the face successfully.

You first use the lasso tool or magic wand (depending on the color contrast of the edges of the keyed picture) to buckle their faces out, and then replace your faces with the cutouts, and then adjust the color a little OK, learn seriously, it's not difficult.