How to add diatom mud and how to construct diatom mud

Photocatalyst is an excipient added by Junhui diatom mud in the production process.

Photocatalyst is a general term for semiconductor materials with catalytic function represented by nano TiO2, which can promote chemical reactions under the irradiation of light, but will not produce any consumption by itself. After absorbing the ultraviolet rays in the sunlight or illumination source, the photocatalyst substance can undergo redox reaction, and form strong oxidizing hydroxyl radicals and superoxide anion radicals on the surface, oxidizing the free formaldehyde, VOC and other harmful substances in the air into carbon dioxide and water, and at the same time releasing a certain amount of negative oxygen ions and far infrared rays, so as to achieve the purpose of purifying the air. The photocatalyst does not have strict requirements for temperature, and the redox reaction can occur at room temperature, and the photocatalyst will not change and lose during the reaction process, so as to achieve the purpose of long-lasting decomposition of harmful substances.

In my ** Beijing Junhui diatom mud, diatomaceous earth is a tool for adsorption and non-catching, while the photocatalyst is to decompose and purify the harmful substances that are adsorbed and not caught. Compared with the existing indoor air purification methods, it has the advantages of combining air treatment with decoration materials, no secondary pollution, no energy consumption, permanent purification and mildew prevention, etc., and the two complement each other and complement each other. Because it can release negative oxygen ions and far-infrared rays at the same time, Junhui diatom mud also has a certain health care effect.

First contact the staff of the investment promotion department of the manufacturer.

If you want to be a diatom mud joiner, there are a few points you can consider. First, whether the diatom mud brand service is complete. Second, the reputation of the diatom mud brand.

The third is the support of the diatom mud brand for you to join. Taixiang home diatom mud is the diatom mud brand of Guangzhou Taixiang Group, is the top ten brands of diatom mud manufacturers, and is now recruiting diatom mud to the whole country, diatom mud to join the store. It's not complicated to join at all, as long as you have a store, there is no joining fee, and the company also teaches you marketing experience and technical support.

Diatomaceous mud is actually a diatomaceous earth in the deep sea as a raw material, and it is difficult to obtain diatomaceous earth, so it will be much more expensive than other decorative materials. But the advantages of diatom mud are also very numerous. So today I'm here to introduce you to:How to construct diatom mud, and what are the methods of diatom mud construction.

If you are interested, please follow us and take a look.

1. How to construct diatom mud.

1.Flat light method.

This method of construction is the most commonly used and the most popular. Its surface is white and smooth, and it can be an environmentally friendly decorative material, which can meet the customer's pursuit of flat and white aesthetic orientation. This method requires relatively high construction, because most owners will use latex paint walls as the standard, but since diatom mud is not self-leveling, there is no way to think of latex paint.

Construction method. The first step is to protect doors, windows, furniture, and wood panels.

In the second step, a thin layer of diatom mud is applied to the wall. Make sure the application is uniform and that there are no knife marks and blistering on the surface. The applied diatom mud should not be too thick, about 1 mm. Just left and right.

The third step is to recoat the diatom mud while it is drying, pressing gently with your fingers without leaving a trace. At this time, be sure to pay attention to the force, not too hard, and the lights on the scene should be as bright as possible to see if there are any signs of bumps.

2.Spraying method.

Diatom mud spraying method refers to spraying diatom mud mortar evenly on the wall with professional spray paint. This method is suitable for large-area construction and is more effective than other methods.

Construction method. In the first step, objects such as doors, windows, furniture, and planks must be protected with protective tape so that they do not get soiled during construction.

In the second step, diatom mud is prepared according to the proportions, and then try to adjust the oil output and pressure of the spray gun with a plate.

The third step, the spraying process must first specify the route, generally spray the top and then the bottom, first spray in the inside and then spray outside, will not be everywhere.

In the fourth step, it is generally necessary to spray lead twice, the first time is to cover the wall, the hail slag to avoid the bottom, and wait for the first rapid drying before spraying the second time.

In the fifth step, if the surface is to be embossed, the diatom mud must be scraped off before the diatoms are formed.

In the sixth step, after the construction is completed, the protective tape should be removed as soon as possible, and the edges should be flattened with a brush.

3.Artistic approach.

The method is more stable, but the construction method is extremely complex, and the technical requirements for the construction personnel are also very high. The pattern of this method is not specific and will display different styles depending on the constructor. The more common methods are the rubber roller method, the sickle method, the magic method, the printing method, the seal method, and the hand-drawing method.

Construction method. The steps of this method are similar to those of the flat light method. After applying the diatom mud, different colors are scraped off the surface using tools of different shapes. It should be noted that embossing with rubber rollers requires a disposable.

I believe everyone already understands the above suggestions. For the choice of decoration materials, we still have to combine our actual situation and our own preferences. I hope that the suggestions on how to construct diatom mud will be helpful for everyone to decorate.

The construction process of diatom mud is as follows:

1. Grassroots treatment.

Before the construction of diatom mud, the base treatment is carried out. The quality of the treatment affects the follow-up operation and must be paid attention to. Generally speaking, it is necessary to ask professional construction personnel to carry out it, and it is not recommended to paint it yourself.

After the base layer is treated, the joints of the walls, plywood and gypsum board are treated to ensure that there are no cracks, otherwise the pattern drawing will be affected. Before construction, if there are cracks in the wall, they also need to be filled in time.

2. Material blending.

According to the construction area, determine the amount of blending. First of all, clean the latex bucket and pour the appropriate amount of water into the bucket, paying attention to the accurate measurement of the amount of water. Secondly, add a certain amount of color paste, stir well, and then pour the dry powder into the bucket to ensure that the dry powder and the color paste are fully mixed, and there is no residual granular items and no agglomeration.

Leftover paint from the same day can be sealed and stored without wasting or throwing it away.

3. Texture production.

It refers to the production of diatom mud forms and patterns. Through construction tools and methods, different surface texture states and patterns can be created, and the most personalized diatom mud can be designed in line with the interior style. In principle, there is no certain specification for the texture of diatom mud, as long as you have artistic skills and imagination, you can design your own patterns.

Diatom mud

It is a natural and environmentally friendly interior wall decoration material. It is used to replace wallpaper and latex paint, and is suitable for interior wall decoration of villas, apartments, hotels, homes, hospitals, etc. Powder decorative coatings with a variety of additives, powder packaging, not liquid drums.

Due to its good workability and plasticity, construction, painting on the wall, making patterns, etc. can be modeled at will.

The formula of diatom mud is generally diatomaceous earth, and then add relevant additives, submerge and mix it into finished diatomaceous earth, and then add water to make it into mud during construction! Diatom mud will have different colors and different thicknesses, all of which are made with a certain amount of color powder and sand grains added during the preparation process.

The main ingredient is SiO2, diatom mud is a kind of diatomaceous earth as the main raw material of the interior wall environmental protection decorative wall material, with the elimination of formaldehyde, air purification, Nachang humidity, release of negative oxygen ions, fire retardant, wall self-cleaning, sterilization and deodorization and other functions.

500kg of natural diatomaceous earth, 100kg of bentonite, 300kg of heavy calcium, 50kg of titanium dioxide, 10kg of cellulose, 20kg of edible binder, 20kg of anti-crack.

The ingredient is SiO2, diatom mud (English: diatom mud) is a kind of diatomaceous earth as the main raw material of the interior wall environmental protection decorative wall material, with the elimination of formaldehyde, air purification, humidity regulation, release of negative oxygen ions, fire retardant, wall self-cleaning, sterilization and deodorization and other functions.

Because diatom mud is healthy and environmentally friendly, it is not only very decorative, but also functional, and is a new generation of interior decoration materials to replace wallpaper and latex paint.

The formula of diatom mud is classified as: weak alkali formula and heavy calcium formula.

Xinyang sublimation is quite wrong, you can go and see it. They are mainly engaged in thermal insulation mortar mixers, dry and wet horizontal mixers, dry mortar special mixers, automatic feeding and discharging mixers, stainless steel grinders, etc., as well as various advanced coatings.

Diatom mud itself does not have any pollution, and has a variety of functions, which is incomparable to traditional paints such as latex paint and wallpaper. There is no need to move when decorating with diatom mud, because there is no smell in the process of building diatom mud.

Natural and environmentally friendly. Diatom mud wall material is composed of pure natural inorganic materials, does not contain any harmful substances and harmful additives, and the material itself is a pure green and environmentally friendly product. Its main ingredient diatom minerals are widely used in beauty**, beer food filtration, etc.

Purify the air. Diatom mud products have a unique "molecular sieve" structure and selective adsorption performance, which can effectively remove free formaldehyde, benzene, ammonia and other harmful substances in the air, as well as odors caused by pets, smoking and garbage, and purify indoor air.

Pastel colors. Diatom mud is made of inorganic pigments, and the color is soft. When people live in a living room coated with diatom mud, the light reflected by the wall is natural and soft, and people are not prone to visual fatigue, which effectively protects the eyesight of you and your family, especially for children. At the same time, the color of the diatom mud wall is long-lasting, not easy to fade, and the wall is as good as new for a long time, which increases the life of the wall, reduces the number of wall decorations, and saves the cost of the room.

Fireproof and flame retardant. Diatom mud is composed of inorganic materials, so it does not burn, and even in the event of a fire, it does not emit any smoke that is harmful to the human body. When the temperature rises to 1300 degrees Celsius, the diatom mud only appears in a molten state and does not produce harmful gases and other smoke.

Breathing is conditioned by humidity. With the change of ambient air temperature in different seasons and in the morning and evening, diatom mud can absorb or release water, and automatically adjust the indoor air humidity to achieve a relative balance.

Sound absorption and noise reduction. Due to the molecular structure of diatom mud, it has a strong noise reduction function, which can effectively absorb the high-frequency sound segment that is harmful to the human body and attenuate the low-frequency noise function. Its effect is equivalent to more than 2 times that of cement mortar and slate of the same thickness, and at the same time, it can shorten the after-echo time by 50%, greatly reduce the harm of noise to people, and create a peaceful sleeping environment for you.

Craftsmanship. The construction process of diatom mud can be completed according to the different requirements and preferences of customers, using traditional craftsmanship and special tools. The diatom mud finish has rich texture, friendly and natural effect, vivid and real texture, and has a strong artistic appeal.

No dust. Diatom mud is not easy to generate static electricity, and the surface of the wall is not easy to fall dust.

Timeless. The service life of diatom mud can reach more than 30 years, and it will last for a long time.

Thermal insulation. The thermal conductivity of diatomaceous earth, the main component of diatom mud, is very low, and it is an ideal thermal insulation material, with very good thermal insulation performance, and its thermal insulation effect is 6 times that of cement mortar of the same thickness.

1. Stir.

The most common method is to pour an appropriate amount of water and diatom mud into a container to soak, and then stir after a few minutes. How much water to pour should be accurate, it is strictly forbidden to open the faucet to inject water directly, and determine the amount of water by experience, otherwise because the amount of water in each bucket is different, the color will be different. It should be noted that during the stirring process, some more water should be added to it until it is evenly stirred.

2. Smear. Once stirred well, it is ready to apply. The first application of diatom mud should be applied on an average of about 1 mm, and after it is not sticky, the second application can be carried out. The thickness of the second application is about millimeters, and the thickness of the second application should never exceed 3 millimeters.

3. Make texture patterns.

It is understood that in addition to the ecological function, the biggest feature of diatom mud is that it can be carved to make beautiful patterns. Therefore, when the diatom mud is completely dry, you can create a texture pattern according to your preference and according to the construction method. Logically speaking, there is no limit to the form of texture expression.

Diatom mud wall material is like a mural material, construction tools are like a tool used to make murals, as long as you have imagination, have artistic skills, you can play on the construction of the wall, but this kind of master is very few after all.

4. Collect the light. After the texture pattern on the surface of the diatom mud is made, you can use a polishing trowel to compact and collect the light along the pattern pattern.

Diatom mud is a home decoration interior wall decoration material, suitable for indoor wall decoration.

Starting from the properties of the material itself:

1. It is suitable for indoor and outdoor applications. Diatom mud is not weather resistant, and temperature changes, wind, frost, rain and snow will cause damage to diatom mud.

2. It is suitable for living room, bedroom, corridor and study lamp, and is not suitable for wet areas in the kitchen and bathroom. Diatom mud does not have the ability to resist oil smoke, and it will be polluted by oil smoke in the kitchen environment, and it is irreversible. Diatom mud is not suitable for long-term contact with open water on the wall, and in the wet area of the bathroom, it will reduce its strength and cause peeling and cracking due to long-term immersion in water.

3. It is suitable for walls (including façade walls and ceiling walls), but not suitable for the ground. Diatom mud is not as wear-resistant as flooring or tiles, and is not suitable for ground use.

Starting from the functionality of the material:

1. Moisture absorption mode, adjust humidity. It is suitable for areas with dry air (such as the northern heating season) and humid air (such as the rainy season in the south), as well as some people who are extremely sensitive to humidity.

2. No pollution, remove formaldehyde, purify the air. It is suitable for long-term living environment such as living room (bedroom), especially suitable for children's room, mother and child room, elderly room and other special people's living environment.

3. Sound insulation and noise reduction. It can be used as one of the materials for the soundproof wall of the audio-visual room, compared with latex paint, wallpaper and other materials, whether it is from the sound insulation effect or reduce the impact of echo, it is better.

4. Variety of shapes, three-dimensional effects. It is suitable for TV background wall and some commercial places, which can highlight the difference of the wall and enhance the overall grade.