Midea soymilk machine starts and chooses what is the problem that the light is not lit only the dry

This is because there is only one light that can be lit when the soymilk machine chooses to turn on the light, if you choose dry beans, click directly to start, you can start to beat soymilk, the start and selection lights are not on, choose directly, and it will sound a sound.

1. The soymilk machine is controlled by microcomputer to realize the full automation of the preheating, beating, boiling and delayed boiling process, especially due to the addition of the "simmering" processing program, which makes the soymilk more nutritious and the taste more fragrant.

2. The cup body is like a huge teacup, with a handle and a mouthpiece, which is mainly used to hold water or soy milk. Some cups are made of plastic and some are made of stainless steel, but they are all made of stainless steel or polycarbonate that meet food hygiene standards. When purchasing the machine, it is advisable to choose a stainless steel cup body, mainly for easy cleaning.

The "water level" line and the "water level" line are marked on the cup body to standardize the amount of water added to the cup. The upper edge of the cup body just fits the lower cover of the machine head, which plays a fixed and supporting role for the machine head.

After connecting the power supply, the first one is that dry beans are selected by default, and you can select another mode by pressing the select button. If your light doesn't light up, there may be a problem, look at the manual or ask the manufacturer.

Usually there are no lights to start with. Only function keys such as dry beans, wet beans, juice, etc. have lights.

All three practices are the same.

Add water, add beans, and plug in.

Let's put the material as you like.

After the power is plugged in, just press the button and you're good to go.

If you don't even have a button, forget it.

Just wait for the alarm sound.

Drip drip, drip. Unplug it and you're good to go.

1. What's wrong with the soymilk machine not starting

1. If you plug in the power supply, but find that the soymilk machine does not have any reaction, it may be the soymilk machineThe nose of the machine did not return to its positionThere is no sufficient contact with the contact column, resulting in poor contact, so there is no power on, and there is no way to start.

2. It may be that the motor is stuck, or the power supply is not powered on at all, which will also lead to the failure to start normally. If water enters the machine, the electric board will be short-circuited. We can remove the circuit board of the motor, dry it with a hair dryer, and don't use it for the time being.

3. It is also possible that the water is too little, or the soybeans are too much, you must add water and soybeans according to the standard amount, otherwise the soymilk machine will not be able to start normally if it detects a fault.

Second, what problems will occur in the soymilk machine?

1. After plugging in, it is found that the indicator light is not lit, it is also possible that the interface is loose or the contact is poor, or it is possible that the indicator light is damaged, so the problem of not lighting up, the best way is to replace the light board directly.

2. Some users find that the time to grind soy milk is too long when using the soymilk machine, it may be that the temperature of the water is relatively low, and once it is lower than the temperature standard, the cooking time of soymilk will be extended. Another possibility is that the current voltage is too low, which will cause the soy milk to be ground for a longer time.

3. Boiled soy milk must be cooked, otherwise there will be food poisoning.

phenomenon. If you encounter the problem of undercooking soymilk, it may be that the computer board is damp, resulting in disordered procedures, or improper use causes water into the motor, which will cause the soymilk machine to not operate normally.

The above specific analysis is why the soymilk machine cannot be started, there are many reasons, and we also need to maintain the soymilk machine correctly in order to prolong the service life. In case of failure, you can call after-sales service ** for consultation.

It may be caused by the nose not being in place, because in this case, the head cannot be completely in contact with the contact column, resulting in poor contact, resulting in the soymilk machine being unable to start. The nose needs to be picked up and put back in place so that it can be fully connected.

It may be caused by the motor stuck, for example, water enters the machine, causing a short circuit in the electric board, in this case, it is necessary to remove it with a tool ,..

It is also possible that there is too much water or soybeans in it, and the soymilk machine cannot be started when the water and soybeans are beyond the standard range.

It is also possible that the power supply is not energized at all, such as a problem with the outlet.

Soy milk is rich in protein, vitamin B and other essential elements for the human body, especially when eaten with fried dough sticks and steamed buns in the morning. Soy milk is ground with beans, and if possible, we can buy a soymilk machine to grind it ourselves, so that the soymilk is more delicious and natural. Today's soymilk machines are very smart, and they will complete a series of operations such as soaking beans, grinding beans, beating soy milk and boiling soy milk, just look at the status of the indicator light.

So what's going on with all the indicators of the Midea soymilk machine flashing?

1. Is the full flashing light of the malfunction of the Midea soymilk machine broken?

There are many reasons why all the indicator lights of Midea soymilk machine are flashing:

1.The amount of water discharged does not meet the regulations. There is a water level in the Midea soymilk maker. When working, the water in the Midea soymilk machine must be at the water level. It can't be too high or too low. You can check the amount of water inside to see if there is a problem with the amount of water being too high or too low.

2.The nose is unstable. When the Midea soymilk machine is working, the head must be stable and close to the wall so that it can work normally after the power is on. If it is not tightened, the light will flash after turning it on, and an alarm will appear from time to time.

3.Water enters the nose. When cleaning the Midea soymilk machine, I accidentally let water into the machine head, which damaged the internal circuit board and caused the light to flash. If you are unsure about such problems, you should take the Midea soymilk maker to a professional for inspection and repair.

4.Work done. Usually, Midea's soymilk maker will sound an alarm when the work is done, and all the indicators will flash.

In this way, it reminds people that the soy milk maker is finished and the outlet can be unplugged. Note, however, that this indicator will only flash for a few seconds and will not blink all the time. If the soymilk maker indicator light is flashing all the time, there are other reasons that must be considered.

Second, is the indicator light of Midea's soybean milk machine flashing?

Midea soybean milk machine will flash the indicator light after the work is completed, but the alarm light will not be on, and this light will only flash for a few seconds. If the alarm indicator flashes completely, it may be caused by the sensor wire forgetting to connect, improper operation and balance, it is recommended that you read the user manual more and then turn it on again.

3. How to make soy milk in Midea soymilk machine

1.Take out an appropriate amount of soybeans with a measuring cup, add the washed soybeans to the soymilk maker, and add an appropriate amount of water to the soymilk maker (add an appropriate amount of water according to the water level in the soymilk machine).

2.Put the head of the soymilk maker into the soymilk maker in the correct direction.

3.Turn on the power, the soy milk will beep, and the first power indicator lights up, indicating that the power is on.

4.According to the function button prompt of the soymilk machine product, select the corresponding function, and then press the "Start" or "Cancel" button, the machine will enter the working state, generally the working time of the soymilk machine is about 25 minutes, when you hear the sound of the soymilk machine, the machine makes a "didi" sound to indicate that the soymilk machine has been completed, and the soymilk machine will enter the state of heat preservation.

5.After preparing the soy milk, unplug it and strain it into a soy milk cup, let it cool to a suitable temperature before drinking.

In the process of using the Midea soybean milk machine to make soy milk for the baby, it was found that all the lights were flashing, which was different from the usual flashing lights, and mothers would feel strange at this time. If you want to figure out what is going on with all the lights of the Midea soymilk machine, see what causes the problem with the lights, and if it is a failure, it can be solved in time.

There are several reasons why all the lights of Midea's soymilk machine are flashing:

1. The amount of water discharged does not meet the regulations. There is a water level in the Midea soymilk machine, and the amount of water in the Midea soymilk machine must be in the water line when it is working, and it is not too high or too low. You can check the amount of water in it to see if there is a problem that the water is too high or too low.

2. The head of the machine is unstable. When the Midea soymilk machine is working, it needs to be stable and tightly sealed with the wall, so that it can work normally after being powered on. If it is not sealed, the light will flicker after the power is on.

from time to time, there will also be an alarm.

3. Water ingress into the nose. When cleaning the Midea soymilk machine, water was accidentally allowed to enter the machine head, resulting in damage to the circuit board inside, resulting in the light flickering. When you are not sure that this kind of problem is the problem, you should take the Midea soymilk machine to a professional for inspection and maintenance.

4. The work is completed. Generally, after the work of the Midea soymilk machine is completed, in addition to the alarm sound, there will also be a situation where the lights are all flickering. In this way, people are reminded that the soymilk maker has finished its work and the outlet can be unplugged.

But remind that this kind of light flashing will only last for a few seconds, will not keep flashing, if the soybean milk machine light is flashing all the time, it is necessary to consider the reason for the stupid orange noodles of other parties, you may wish to rule out one by one from the above three reasons.

Summary. The soymilk machine indicator light is fully lit and the reason why none of the buttons can be operated:

1. Check the fault phenomenon of the soymilk machine, the failure of the soymilk machine panel may be just a few button failures, if you will do it yourself, disassemble the head of the soymilk machine, remove the small control board, which button is not good, check which one.

2.The computer version of the soymilk machine is damp and causes the chip program to be chaotic, and the local short circuit of the computer board will also have the phenomenon of key failure, use a hair dryer to dry the computer board and the water in the machine, or use a few drops of alcohol, press a few more times, it is really not possible to replace the computer version intelligently.

3.The light board of the soymilk machine is rusted or oxidized due to moisture, so the button or light board needs to be replaced.

4.If the key does not work and the indicator light does not light up, please check whether the light board data cable and the computer version plug are not connected.

My soymilk machine indicator light is fully lit and none of the buttons can be operated What is the reason?

Hello, I'm glad about your question, I'm querying the relevant information for you, it takes a little time to type, please be patient

The reason why the indicator light of the soymilk machine is fully lit and the buttons cannot be operated: 1. Check the failure of the soymilk machine, the failure of the soymilk machine surface trillion travel board may be just a few buttons to guess the mold failure, if you will do it yourself, disassemble the head of the soymilk machine, remove the small control board, and check which button is not good. 2.

The computer version of the soymilk machine is damp and causes the chip program to be chaotic, and the local short circuit of the computer board will also have the phenomenon of key failure, use a hair dryer to dry the computer board and the water in the machine, or use a few drops of alcohol, press a few more times, it is really not possible to replace the computer version intelligently. 3.The light board of the soymilk machine is rusted or oxidized due to moisture, so the button or light board needs to be replaced.

4.If the button does not work and the indicator light does not light up, please check whether the light board data cable and the computer version plug are not connected.

Q: Joyoung soybean milk machine lights are all on, don't ask anything else.

Wait a minute, check it out for you.

Be specific. You can refer to the following figure for troubleshooting, and determine that the wrong operation may be a machine problem.

Say the middle point. The second one in the table.

Dear, do you see.

There are reasons and workarounds.

Is the chip broken?

You have to take this to the physical store to check it out.

I won't ask you if you send it to the repair shop.

I can't help you judge this one in the air.

I'm repairing. Then you should be <>

I'm sorry, dear, I'm just answering the Lord, not a machine mechanic.

There is no response after the faulty machine is powered on, and there is no problem in checking the external power supply and power cord. After disassembling it, the power coupler was measured with a multimeter, and the conduction was good, indicating that the power coupler was not faulty. Measure the power transformer with a multimeter and there is no short circuit or open circuit.

The failure of this machine is actually caused by the user's manual cleaning, and the motherboard and motor will resume normal operation after replacing the motherboard. At this point, the soymilk machine does not alarm and does not operate, and the fault maintenance process is over. It is recommended that soymilk machine users must not put the soymilk directly under the water faucet to clean the equipment when cleaning the equipment, because its sealing performance cannot reach the extent that it can be washed with water, so it will cause damage to the circuit board inside the machine head after water ingress.

This is a short circuit in the circuit, causing damage to the fuse. The user can replace the fuse.

Other reasons: 1. The voltage is too high or water ingress in the machine, resulting in the damage of the low-level coil of the transformer. Solution: Replace the transformer.

2. The computer board is damp, and the stabilizer pipe feet are rusty, broken or damaged. Solution: Replace the computer board.

3. The power socket is not in good contact, or the plug is not firm. Solution: Plug it in.

There is no power or the power supply is not plugged in.

I am in Changshu Wang City, Jiangsu, is there a maintenance point?