How to get rid of the musty smell of old furniture 10

No one sits on the sofa for a long time! You're stumped everyone!

Old furniture is turned into treasure.

1. Re-label the furniture.

You can re-apply stickers to old furniture, and the stickers you choose must also match the style of the furniture. To be on the safe side, before proceeding with the sticker process, it is necessary to repaint the furniture for protection.

2. Brush the paint.

You can also repaint old furniture, and if it's wood or metal, it will look like new.

3. Parts on furniture.

You can remove the hardware parts on the furniture, and then use them, so that you can also turn the old furniture into treasure.

If the indoor ventilation of the home is not good, it is easy to be sensitive, damp and moldy. What to do if the furniture is moldy? Let's take a look.

1. Once the furniture is found to be moldy, clean up the moldy place first, and under normal circumstances, wipe it clean with a clean towel. If that doesn't work, try it with a fine-bristled brush. If the area of mold is relatively large, then use a wet towel to vigorously wipe the moldy area to remove the moldy spots, but the bed may be more prone to mold if it is wet, so remember to dry and ventilate after wiping.

2. If there is mold, it is necessary to wipe it with a special mold rag, and it is not finished after wiping it clean, and it is necessary to brush the varnish on the place where the mold occurs, which can effectively prevent mold again.

3. The room is too humid, and bacteria are easy to breed, resulting in frequent mold. Pay attention to open windows frequently for ventilation. Do not use a humidifier inside the house.

After mopping the floor, pay attention to open the window or turn on the fan and air conditioner to dry the house. Also, putting some orange peel on the bed board is also good.

Remove the mold from the furniture, and then disinfect the mold with 95% alcohol; If there is mold, wipe it off with a special mold rag and brush it with varnish; Wrap lime or charcoal in a cloth and place it indoors. Here's how to deal with it:

Move the moldy furniture out, use a clean towel or soft cloth to remove the mold on the furniture, then use a clean towel or soft cloth dipped in 95% alcohol to disinfect and clean the mold, then we use sandpaper to grind, and finally we spray the same color paint to dry it and then use it.

Wet a towel to remove the mold spots. Wet beds are more susceptible to mold, so be sure to wipe them dry and ventilate. If there is mold, it should be wiped with a special mold rag, and after wiping, it should be brushed with varnish, and pay attention to opening the window for ventilation.

Lime or charcoal can be used to absorb moisture, and pure branches can be wrapped in cloth and placed indoors on rainy days or rainy seasons to keep the air dry. Place H-10 anti-mildew drying packs inside the finished solid wood furniture to reduce the risk of mildew due to moisture.

Kill mold spores with chlorine dioxide. This method is mainly used to control musty odors on ships and also to control mold outbreaks in libraries. Treat mold stains on old furniture topically with hydrogen peroxide.

Mix 3 teaspoons of hydrogen peroxide and 5 teaspoons of water, dip a little solution with a thick paint brush and wipe the moldy area. Putting an open box of baking soda into old furniture can eliminate odors and absorb moisture. Let it sit for at least 2 to 3 days before taking it out.

1. Use chlorine dioxide to kill mold spores. This method is mainly used to control musty odors on ships and also to control mold outbreaks in libraries.

2. Use hydrogen peroxide to treat mold stains on old furniture. Mix 3 teaspoons of hydrogen peroxide and 5 teaspoons of water, dip a little solution with a thick paint brush and wipe the moldy area.

3. Put an open box of baking soda into old furniture to eliminate odors and absorb moisture. Let it sit for at least 2 to 3 days before taking it out.

How to prevent mold on furniture:

1. Keep ventilation and ventilation. The reason for the moldy cabinet is that it cannot be quickly ventilated and dried due to the lack of moisture, so it is necessary to open the indoor doors and windows of the cabinet to keep the indoor ventilation and ventilation, which can help the room to keep dry and refreshing, and the cabinet is not easy to be damp and mildew, but pay attention to the weather conditions, do not open the cabinet as much as possible in rainy and humid weather, close the doors and windows, refuse the moisture in the outside air to enter the home, and prevent the cabinet and the items in the cabinet from being damp and moldy.

2. Keep the wardrobe away from water sources. Another reason for the mold of the cabinet is often the damp wall behind the cabinet, the other side of the wall is the water source or the kitchen, bathroom and other more humid stupid calendar such as the area, in this case the wardrobe is often moldy, especially when the waterproof of the home is not done, it is best to move the wardrobe away, put it in a new position, and usually put some dehumidifying things (such as dehumidifiers) in the wardrobe to prevent the wardrobe from getting wet.

3. Anti-mildew formula paint. This needs to be selected when home decoration, the choice of paint containing anti-mildew formula to paint the wall of the home, can effectively prevent mold germination and fight against the growth of harmful bacteria, and make the dirt not easy to adhere, wipe resistant with washing, more suitable for bathrooms and kitchens, basement walls are easy to damp and other places, reduce the humidity of the home environment, limit the breeding of mold, and keep the wardrobe dry without mildew.

Answer: Method 1 of mildew removal.

During the rainy season, washed clothes are not easy to dry and often have an unpleasant musty smell. If you wash your clothes again in water with a small amount of vinegar and milk, you can get rid of the musty smell. If there are yellowing areas in the clothes or sheets you collect, you can apply some milk, let them dry in the sun for a few hours, and then wash them again in the usual way.

Method 2 for removing mildew stains.

If there are mold marks on the woolen fabric, it must be hung in a cool and ventilated place to dry, and then wiped repeatedly with cotton dipped in a small amount of gasoline.

Method 3 for removing mildew stains.

For new mildew spots, brush first with a brush and then remove with alcohol. The old mildew is coated with ammonia, left for a while, then coated with potassium permanganate solution, and finally soaked with sodium bisulfite solution and rinsed with water. In the above treatment process, it is necessary to prevent the spread of mold.

Method 4 for removing mildew stains.

If there is mildew on the leather goods, it is not advisable to wipe it with a damp cloth, and it is best to brush off the mildew after drying (or drying). In order to prevent mildew, some potions can be prepared, the ingredients are: 3 parts of nitrophenol (can be bought in chemical stores), 10 parts of soap, 100 parts of water, dissolved and applied to the leather goods, and dried to dry.

The tea residue is dried and put into furniture for a period of time, and the effect is good.