How to use storage type electric water heater?

If it is two heating pipes, it can heat a small amount of water, only start one to heat the upper part of the water, if it is a tube, it is not possible.

The use of storage type electric water heaters is as follows:

1. For water inlet, first open the outlet valve of the electric water heater, adjust the mixing valve to the high temperature outlet position, and then open the water inlet valve, at this time, the inner tank begins to fill with water until the outlet valve is normally discharged, and then close the outlet valve, and the water inlet valve is open in normal use.

2. Plug in the power plug, press the reset button on the leakage switch, the indicator light of the leakage switch is on, and the temperature display screen of the electric water heater with water temperature display shows the water temperature value in the inner tank, press the rocker switch "i" on the control box, at this time, the indicator light in the switch "i" is on, indicating that a group of heating pipes in the inner tank has started to work.

If you press the rocker "II" again, the indicator light in the switch "II" will be on, indicating that another set of heating tubes in the inner tank has also started to work. With this function, you can use a separate set of heating elements to heat the heating when there are few people or in the summer, and when there are many people or in the winter, you can turn on both switches to save energy.

3. Rotate the temperature control knob, adjust to the set temperature you need, rotate clockwise to increase the temperature, counterclockwise to reduce the temperature, generally can be placed in the highest temperature position to work, when the water temperature reaches the set temperature, the electric water heater will automatically stop working, at this time, the indicator light in the rocker switch is off, the display screen shows the water temperature value at that time, when the water temperature drops to a certain temperature, the electric water heater will automatically turn on the power and reheat.

4. When the electric water heater is heated, there will be water droplets or a small amount of water flowing out of the one-way safety valve, which is a normal phenomenon, and the water can be led to the appropriate place with an ordinary plastic pipe.

5. Adjust the mixing valve to get the water temperature that is suitable for you, after adjusting the temperature of the mixing valve, the hot water temperature of the electric water heater is basically constant, you don't have to adjust the mixing valve often, only when the hot water in the inner tank is about to run out, the water needs to adjust the angle of the mixing handle slightly, and the shower should not test the water temperature against the human body, so as not to burn **.

Precautions for storage electric water heaters

1. If hot water is used frequently and the amount of hot water is relatively large, it is recommended to turn on the storage electric water heater all the time, but adjusting the hot water temperature according to the frequency of use and the amount of hot water used can also play a certain role in energy saving.

2. For the use of electric water heaters every day, but the amount of hot water used is not very large, then turn on the heating function of the storage electric water heater an hour before use, and turn off unnecessary functions at other times, which can also save part of the electricity bill.

3. In the case of not using hot water often (such as using it once every two or three days), the frequency of use of the electric water heater is not high, so you can turn off the power of the storage electric water heater during the time when it is not in use, and turn it on an hour before use, which can save a lot of electricity bills.

The usage of storage type electric water heaters is as follows:

Tool version: Midea storage type electric water heater, model F60-30GM6 (HEY).

1. When using it for the first time, turn on the faucet of the electric water heater to let the water enter the inside of the electric water heater.

2. Plug in the plug of the electric water heater, stare at the branch and press the switch of the electric water heater, then you can see the green light of the electric water heater light up.

3. Wait until the digital temperature no longer changes, indicating that the water is hot and reaches the set fixed temperature, and then it can be used.

Maintenance knowledge of electric water heaters

1. Do not replace the parts on the electric water heater by yourself. Do not repair privately after the failure, Kai Paimin should contact the maintenance unit in time and ask professionals to come to the repair.

2. When cleaning the surface of the fuselage, turn off the power first, then use a neutral detergent with a soft cloth to wipe the shell of the water heater, and then wipe the shell with a clean damp cloth.

3. Regularly remove the residual dirt of the shower and the water trap to ensure the smooth water outlet, and it is helpful to prolong the service life of the water heater.

4. The surrounding environment of the water heater should ensure that the humidity is not too high, except for bathing, the surrounding environment of the electric water heater should be kept dry as much as possible to ensure that the leakage switch of the electric water heater can work normally.

Nowadays, basically every home will be installed with a water heater, and it is convenient to take a bath or use hot water on a regular basis. How to use a storage electric water heater? pchouse will take you to Zen and learn about it together.

1. First of all, the operation sequence of the storage electric water heater is to turn on the water first, and then turn on the electricity. After heating, hot water is used. When using a storage electric water heater for the first time, open the hot water valve and then the cold water inlet valve before turning on the electricity.

In order to ensure that the cold water enters the water tank smoothly. Wait for the hot water valve to come out. Indicate that the cold water fills the entire tank, and the hot water valve is turned off at this time.

2. Secondly, if the water supply system is normal. The first step is to set the desired water temperature. Then turn on the power supply, and the hot water indicator light is on for the normal state.

After the circuit of the storage water heater is turned on, it cannot produce hot water immediately. It takes about 20 minutes to produce hot water, and when the indicator light turns on and off, it means that the water is up to the requirement.

3. Then, open the hot water outlet valve, the hot water can be used when it flows out, and the hot water just released has a higher temperature. Adjust appropriately with cold water, and gradually decrease the water temperature as the amount of hot water usage increases.

4. Finally, it is necessary to confirm that the storage tank of the water storage type electric disturbance macro water heater is full of water before the power supply can be turned on. If there is no water in the water storage tank, it is easy to cause the tubular heating element to burn out.

About your question: How to use the water storage Sibi electric water heater here to help you inquire:1

Turn on the power: First, turn on the power and press the power switch to make sure the power is turned on. 2.

Open the water valve: Open the water valve to ensure adequate water flow. 3.

Adjust the temperature: Press the temperature adjustment button to adjust the temperature, in general, the temperature adjustment range is between 35-75 degrees. 4.

Turn on the electric water heater: Press the electric water heater switch to make sure the electric water heater is turned on. 5.

Check the water temperature: Check the water temperature to make sure that the water temperature has reached the desired temperature. 6.

Turn off the power: When you run out of electric water heaters, remember to turn off the power to avoid potential safety hazards. Hope it helps you <>

There are other questions you can continue to consult with the rent, thank you for your trust, the above is my reply, I hope it can help you, I wish you a happy life If the content is helpful to you, I hope you can get your like, thank you very much!