The XP sound card cannot be installed with 100, and the XP sound card cannot be installed

Y510 Series 2K XP Lower Sound Card Driver Size:

Version: Updated: 2003-07-09

Now** Program Description: After you have installed the operating system, please install the motherboard chipset driver first, then restart the computer, and then install the drivers for other devices, otherwise it may cause the driver installation of some devices to be abnormal or the system operation is unstable. Lenovo recommends using Microsoft's genuine Windows XP operating system.

win2000

How to install and operate Windows XP as a system.

Before installation, set the optical drive in BOIS as the first boot, specific operation:

On desktop, when the computer boots, press Del to enter Bois, select Advanced BIOS Features to set First Boot Device to CDROM or ***ROM Press F10, press Y, save.

For notebooks, press F2 when the computer starts, select Boot, set 1st to cdrom or ***rom, press F10, press Enter, save.

Put the engraved system disk into the optical drive, restart it, and select Fully Automatic Installation XP to C Drive (generally choose 1). When the system is installed, the drive can generally be installed.

When we use the computer, we often encounter the situation that we need to install a sound card driver. So, how do you do that? Next, I will take the pure version of the XP system as an example to introduce you to the specific method of installing the sound card driver in the computer.

The details are as follows:

If there is no sound on the computer due to sound card driver problems, we can enter my computer --- right-click --- select --- Properties--Hardware--Device Manager as shown below:

Click on the device manager to enter the following electric balance brain hardware driver view, as shown below.

The sound card driver is not working properly, and an exclamation point is displayed.

As seen in the figure above, it is a typical problem of no sound in the computer caused by the failure of the sound card driver, you can see that there is a yellow exclamation mark in front of the "multi** audio controller", which means that there is a problem with the sound card driver, most of the reasons are due to the incompatibility of the sound card driver and the hardware of the installation system, so how to solve the problem that the sound card has no sound on the computer due to the incompatibility of the driver?

Many friends may say that it is feasible to change the system and the solution is actually feasible, but it is more troublesome, and I dare not guarantee that the drivers in the new system will be compatible with the hardware, so is there a better way? In fact, as long as the driver corresponding to the hardware of the computer sound card is installed.

First of all, we have to check the specific brand and model of the computer sound card, which needs to be viewed more clearly with the help of software, and it is recommended that you use Master Lu to detect, which is very convenient.

Open Master Lu software, we can see the working status of our computer, the working temperature of each major hardware, and whether it needs to be energy-saving and optimized, etc., the function is still excellent.

So how do you look at the configuration of the computer?

We click on the hardware detection next to the homepage to start automatically detecting the computer hardware and give us the hardware information, which is the configuration information we need.

A brief introduction to the installation method:

Click on the yellow exclamation mark as shown in the image above, click Reinstall Driver--- select Install from the list --- select the path of the sound card - the rest of the way is OK to complete the installation.

It is highly recommended that novice friends if you want to install the driver or update the driver can use the driver wizard software, you can very convenient to update the driver and install the driver, when the computer has a driver failure, the software can be automatically detected, we can update the automatic installation with just a few clicks of the mouse, very convenient.

The driver wizard software is very simple to use, full Chinese interface, after the installation software enters, the software will automatically detect whether there is a problem with all the hardware of the computer, when the graphics card driver has a problem, it will automatically detect, prompt whether to install a new driver, etc., and will also prompt which drivers can be updated to a higher version, etc., the function is very powerful, very suitable for novice friends to operate, truly update the driver and install the driver without asking for people.

That's it for the XP system installation sound card driver tutorial.

1. Uninstall the original sound card driver, choose the drive disk you think is good to reinstall, and try a few more when you can't help but bump into it.

2. If there is no suitable CD, look for the sound card model, if you don't know, you can: "start" - "run" - input.

DXDIAG, open the "DirectX Diagnostic Tool" - Sound, check your sound card model from the open interface, to the driver home, Zhongguancun**, Huajun and other **** driver software, decompress and standby.

4. If it can't be installed automatically, right-click "My Computer" -- Properties -- Hardware -- Device Manager, open "Sound, ** and Game Controller", and right-click under "Sound, ** and Game Controller". option, select "Update Driver", open "Hardware Update Wizard", remove the check box before "Search for removable **", check "Install from the list or specified location" -- Next, check "Include this location in the search", and open the list box under the path of the sound card driver folder (d: ...Next", the system automatically searches for and installs the sound card driver in the location you specified.

This notebook was released for the Vista system, and the XP system has not been tested, and the relevant drivers have not been released, and Microsoft has also stopped supporting the XP system, so it is recommended that you use the Vista system to get the best performance and stability. If you really need to install the XP system, the following is a personal query for your sound card driver, although there is no guarantee that it will be installed successfully, but you can install it to try.

1. If you are using the XP SP2 version of the system, please install the "Microsoft Universal Audio Architecture (UAA) Bus Driver" first, and then install the sound card driver.

Microsoft Universal Audio Architecture (UAA) Bus Driver:

2. If it is Windows XP SP3 version, please perform the following operations directly.

Please right-click "My Computer", select "Manage", open "Device Manager", click the + sign in front of "System Devices", and see if you can find "Microsoft UAA Bus Driver for High Definition Audio" below, if so, please right-click "Microsoft UAA Bus Driver for High Definition Audio" and select "Deactivate". and then right-click again to re-Enable. The new hardware installation wizard will then pop up automatically, click "Cancel".

3. Please click the start menu, open the control panel, and see that there is "IDT sound card control panel", if not, please restart the computer. Then please open the "IDT Sound Card Control Panel" and turn off the power management item in it (that is, there will be a small dot before the power management, please point it to gray).

4. In order to avoid no sound after restarting, please install the IDT sound card patch. During installation, you can extract the following two sound card patches to the same folder.

part1:

Sound card patches. part2:

Sound card patches. You are welcome to feedback your operation results or questions through the follow-up function, so that we can continue to follow up and solve your problems, and I wish you all the best!

Yours is our driving force! If you approve of me, please click the [] and [Satisfied] buttons!

Drive the Genie or Drive Life to see.