What is the maintenance knowledge of can crusher?

1.After the crusher is started, it should be idled for 2 to 3 minutes, and then put into operation after there is no abnormality.

2.The purity of the material must be checked before crushing, and no metal hard debris is allowed to be mixed in, so as not to damage the knife or cause accidents such as combustion. The feeding should be uniform, if there is noise, the temperature of the bearing and the machine is too high or the material is sprayed outward, etc., the machine should be stopped immediately for inspection and troubleshooting.

3.When feeding, the staff should stand on the side of the crusher to prevent the debris from hurting the face. Do not grip your hands too tightly when crushing long stalks to prevent your hands from being brought in.

--- Henan Huihong Machinery ---

Ideal investment projects for small businesses, individuals, and families.

Welcome your inquiry.

1. Uniform blanking should be maintained in production to ensure crushing quality and normal production, and at the same time, it is strictly forbidden to overload the motor to ensure the normal operation of the machine.

2. In addition to always paying attention to checking the loosening of the fastening of each part, we should also pay more attention to check the wear and tear of the wearing parts, and replace them in time if the wear is serious, so as not to damage the main components. and take the necessary fire prevention measures.

3 Due to the high speed, in addition to the correct and firm installation, good lubrication should be maintained at the same time to maintain the normal operation of the machine. Under normal circumstances, it is normal for the bearing temperature not to exceed 70 degrees. Butter and molybdenum disulfide are added to the main engine bearing once a week, and the effect of high-speed butter is better.

Henan Lixin machinery and equipment *******

Henan Lixin Machinery & Equipment's canning crusher will crush all kinds of waste cans, Lulu filling, beverage cans, beer cans, Red Bull cans, Babao porridge cans, and its cans, metal bottles, cans, Coke cans, paint buckets, waste thin iron sheets, scrap iron slag, moon cake boxes, canned food boxes and other cans into clump particles, so as to reduce transportation costs and improve the speed of scrap iron furnace ironmaking. When the Xincheng can crusher equipment is working, the material can be fully and effectively crushed in the crushing chamber, with high output, low energy consumption, high efficiency and uniform discharge. And when using the equipment, the noise is low, no pollution, simple operation and easy maintenance.

You can also shred scrap metal, bicycles and other metal-like items!

The strongest and most reputable crusher, sand making machine, mineral processing equipment and other machinery and equipment production base in China is the Central Plains of Henan.

In addition to the production of traditional crushing equipment such as hammer crusher, jaw crusher, impact crusher, impact crusher and other equipment, these crusher manufacturers also independently develop and produce a series of environmental protection and energy saving according to waste items (non-metal, cans, plastics, cinders, construction waste) ** independent research and development and production of metal crushers, can crushers, can crushers, plastic crushers, coal gangue crushers and a series of environmental protection and energy saving committed to waste resources** crushing equipment.

There are many manufacturers of can crushers in Henan, including Henan Kefan Heavy Industry, Tianji, Lixing, Zhenlong and other manufacturers of can crushers with reliable performance and excellent quality, and they are in the middle of the market.

The particle size of the crushed material in the can crusher is 600 and 400mm according to the different models. For the discharge material, it can be adjusted, we can change the geometric size of the can crusher or change the aperture of the discharge screen to control the particle size. It is important to remember that the grinding process cannot be adjusted at any time.

Motor: 45kw Output: 2 tons per hour for the whole machine.

Zhengzhou Haoyuan Machinery Manufacturing Co., Ltd. specializes in the production of metal shredders and can crushers, and should pay attention to safety protection and fineness adjustment when working for cans crushers.

These are all advertisements, to tell you the truth, there is nothing to pay attention to when using the can grinder, because this kind of machine is mature equipment and has no quality problems, so it can be used when connected to electricity. I recommend you to search for Tongfeng can crusher, their machine is very good, and the service is also in place.

The basic principle of hammer striking is that under the drive of high-speed and high-torque motor, the hammer head on the rotor of the main engine takes turns to hit the object to be crushed into the cavity, and through the space formed between the lining plate and the hammer head, the object to be crushed can be fully and effectively crushed in the crushing cavity, and the object to be crushed can be torn into a crushed object that meets the specifications. The crushed materials pass through the air rotary sorting system to separate the metal and non-metal, and the whole system is equipped with a dust removal device to minimize the dust pollution hazards generated in the production process.

1. Before starting the can crusher, it is necessary to strictly check whether the installation of all parts of the machine meets the requirements, whether the screws and bolts are loose, and whether the belt can be gently pulled by hand to try to rotate, and whether there is any phenomenon such as touching the shell. At the same time, check the direction of rotation, and it is strictly forbidden to crush flammable and explosive materials to avoid accidents.

2. Uniform blanking should be maintained in the production of can crusher equipment to ensure crushing quality and normal production, and motor overload is strictly prohibited to ensure the normal operation of the machine.

3. In addition to checking the fastening and loosening of each part, the can crusher should also pay more attention to check the wear and tear of the wearing parts, and replace it in time if the wear is serious, so as not to damage the main components, and take necessary fire prevention measures.

Fourth, due to the high speed of the can crusher, in addition to the correct and firm installation, it should also maintain good lubrication to maintain the normal operation of the machine. Under normal circumstances, it is normal for the bearing temperature not to exceed 70 degrees. Butter and molybdenum disulfide are added to the main engine bearing once a week, and Yuantong reminds that the effect of high-speed butter is better.