win10 how to give a user administrator permissions

Open the Local Group Policy Manager.

Click to open the "Computer Configuration" option, then find the "Windows Settings" option, then find and open the "Security Settings" option from "Windows Settings", then open "Local Policies" and finally find and turn on "Security Options".

Find "Account: Admin Status" and you can see that the status is "Disabled", what we need is to turn it on.

Right-click Account: Administrator Status and choose Properties from the shortcut menu that pops up.

In the Account: Admin Status property, select Enable checked.

If you want to change the name of the administrator account, find "Account, Rename System Administrator Account", right-click, and select Properties.

The default name of the system administrator is administrator, you can change it according to your preference, if you don't want to change the name, this step can be ignored.

1) Double-click to enter the control panel and select the change type.

Click to enter. 2) Select Change Account Type.

3) Here you can set the account administrator permission (if there are 2 accounts, if there is only one, that one is the administrator).

For some reason, the current user account does not have administrator privileges or the only administrator account is disabled, so that the program cannot be run as administrator, or it is prompted to enter the administrator username or password when running the program, but there is no entry window. In this case, you need to enter the security mode to reset the user account permissions, as follows:

1.Press the win key + R key at the same time and enter cmd enter.

2.In the command prompt window, enter net localgroup administrators and press enter to confirm that there is only one administrator account under the member before you can perform subsequent operations.

3.Click Start - Power in the system, hold down the shift key and then click Restart, after the computer is booted up, click Troubleshoot - Advanced Options - Boot Settings - Restart - Restart on the Select an option page.

4.On the startup settings page, press the specified key to enter safe mode (usually 4).

5.After entering the safe mode, click Start - Account, you can see the administrator account name, click and log in.

6.After logging in, press the win key + R keys at the same time, enter netplwiz and press enter.

7.Go to the user control page, find your account (s4200ua here) under the local user, and click Properties.

8.Switch to the group members page, click Admin, Apply and confirm, and then click Confirm again when you return to the user account page.

9.Restart your computer, and you can see that the local account has been restored to administrator privileges under Start-Settings-Accounts.

The steps of the method are as follows:

1. First turn on the computer, enter the "Search Web and Windows" input box in the lower right taskbar of the computer, the computer will search by itself, and click the mouse to open it after the search is completed.

2. Click to open the Local Group Policy Manager.

3. Click to open the "Computer Configuration" option in turn, then find the "Windows Settings" option, then find and open the "Security Settings" option from "Windows Settings", then open "Local Policy" and finally find and open "Security Options".

4. Find "Account: Administrator Status", and you can see that the status is "Disabled".

5. Right-click "Account: Administrator Status" and select "Properties" from the pop-up shortcut menu.

6. In the attribute of "Account Leader: Administrator Status", you can enable the selection of pure middle.

The steps of the method are as follows:

1. First turn on the computer, enter the "Search Web and Windows" input box in the lower right taskbar of the computer, the computer will search by itself, and click the mouse to open it after the search is completed.

2. Click to open the Local Group Policy Manager.

3. Click to open the "Computer Configuration" option in turn, then find the "Windows Settings" option, then find and open the "Security Settings" option from "Windows Settings", then open "Local Policy" and finally find and open "Security Options".

4. Find "Account: Administrator Status", and you can see that the status is "Disabled".

5. Right-click "Account: Administrator Status" and select "Properties" from the pop-up shortcut menu.

6. In the "Account: Administrator Status" property, it will be selected as enabled.

Follow the steps below to get administrator privileges:

<>5. Then we log out of the current account and restart it to see if we can log in as an administrator, as shown in the following figures:

After completing the above steps <> obtaining administrator privileges, users can manage other accounts in the system and set administrator-only access to specific programs in the system.

Use the [Win] + [R] key combination to open [Run], enter [], and then the local Group Policy Manager will be opened; Select [Computer Configuration] - [Windows Settings] - [Security Settings] - [Local Policies], and finally find and open [Security Options]; Right-click [Account: Admin Status] to open the property and select [Enabled]. Details are as follows:

1. Use the [Win] + [R] key combination to open [Run], enter [] in the input box, and then [Local Group Policy Manager] will be opened;

2. Click to open the [Computer Configuration] option, the [Windows Settings] option, then open the [Security Settings] - [Local Policy], and finally find and open the [Security Options];

3. Then find [Account: Administrator Status], you can see that the status is [Disabled], you need to open it below, first right-click [Account: Administrator Status], and select [Properties];

4. In the [Account: Administrator Status] attribute, select [Enabled];

5. You can also right-click the [Account, Rename System Administrator Account] option, and then click Properties, you can change the default administrator to other custom names.

1. Right-click the windows icon in the lower left corner of the screen and select the "Run" command, as shown below

2. In the "Run" dialog box that opens, enter ", and click the "OK" button, as shown in the following figure

3. In the window that opens, click "Users" on the left, and then select the account on the right side that needs to be set with administrator permissions, as shown in the following figure

4. Double-click this account, switch to the "Affiliation" tab under the account, and delete the "users" group first, as shown in the following figure

5. Click the "Add" button, enter the administrators group "administrators" in the open dialog box, and click the "Check Name" button, as shown in the following figure

6. After clicking the "OK" button, we can see that there is already an administrator group under the account, and continue to click the "OK" button, as shown below

7. You can also select "Group" on the left, and then double-click the administrators group "administrators" on the right, as shown in the following figure

8. Click the Add button in the administrators group administrators property dialog box, as shown in the following figure

9. Enter the account we need to add administrator privileges and "check name":

10. Click the "OK" button to return to the property dialog box and already have this account, as shown in the following figure

3. Then "System Tools - Local Users and Groups - Users", and double-click the "Administrator" item in the account list on the right.

4. In the pop-up property settings window, uncheck "Account is disabled".

5. Then we log out of the current account and restart it to see if we can log in as an administrator.

2. Enter the following command in the command prompt and press Enter: "net user administrator active:yes".

3. At this time, the administrator account has been opened, and you can see the toggle option by clicking on the user's avatar in the start menu.

4. After clicking Administrator, you will be switched to the login screen, and you can click Login at this time.

5. When you enter the account for the first time, you also need to wait for the application settings.

Once on the desktop, you can work with the highest privileges, UAC won't be turned on, but Windows apps won't run at this time. After completing the necessary work, log out of the account in a timely manner, and close the administrator account again after returning to the normal account. Here's how:

1. Run the command prompt again as an administrator.

2. Enter the following command and press enter: "net user administrator active:no".

At this point, the administrator account is closed. To turn it on again, repeat the above process.

It should be noted that if there is no need, the administrator account should not be open all the time to avoid unnecessary losses.

Generally speaking, the accounts used by users on win10 are local accounts, and local accounts have many restrictions, which are not as convenient as win10 administrator accounts. How to add administrator permissions to win10 local account, you can do it by following the following steps:

How to get administrator privileges in win10.

1) Double-click to enter the control panel and select Change Account Type.

Click to enter. 2) Select Change Account Type.

3) Here you can set the account administrator permission (if there are 2 accounts, if there is only one, that one is the administrator).

Grant permissions to the account after logging in with an administrator account.

There is an administrator by default.,If not, please find me in a private message.。

1. Right-click the windows icon in the lower left corner of the screen and select the "Run" command, as shown below

2. In the "Run" dialog box that opens, enter ", and click the "OK" button, as shown in the following figure

3. In the window that opens, click "Users" on the left, and then select the account on the right side that needs to be set with administrator permissions, as shown in the following figure

4. Double-click this account, switch to the "Affiliation" tab under the account, and delete the "users" group first, as shown in the following figure

5. Click the "Add" button, enter the administrators group "administrators" in the open dialog box, and click the "Check Name" button, as shown in the following figure

6. After clicking the "OK" button, we can see that there is already an administrator group under the account, and continue to click the "OK" button, as shown below

7. You can also select "Group" on the left, and then double-click the administrators group "administrators" on the right, as shown in the following figure

8. Click the Add button in the administrators group administrators property dialog box, as shown in the following figure

9. Enter the account we need to add administrator privileges and "check name":

10. Click the "OK" button to return to the property dialog box and already have this account, as shown in the following figure