Home decoration I don t want to put tiles in the bathroom anymore, is there any other way?

Don't stick tiles on the bathroom floor, the first time I saw someone paving this kind of substitution, the water is fast and non-slip.

For young people, it is a very happy thing to have a house of their own, but now when many people buy a house, most of them choose a small house, the area of the small house is very small, and special attention should be paid to it when decorating, or it will not affect the use of our daily life. Don't put tiles on the bathroom floor, the first time I saw someone shop this kind of substitution, I regret the wrong installation.

Before the decoration, I believe that everyone has some understanding of the bathroom, many people decorate the bathroom, the ground and the wall will be pasted with tiles, ceramic tiles this material has the effect of waterproof and moisture-proof, it is very convenient to clean, ** is cheaper than other materials, you can use this material to create your favorite style, but the material of ceramic tiles has certain shortcomings. The drainage of tiles is very poor, and the surface is smooth, if you do not pay attention to it when using the bathroom, it is easy to slip, especially in families with the elderly and children, there will be potential safety hazards.

Smart people will paste marble in the bathroom, marble materials do not need to worry about dampness, it is very good to go on the outside, marble is very durable, there are many colors and styles, and there are strong selectivity, which can speed up the drainage of the bathroom, and the bathroom decorated with marble is very beautiful and durable, and the style is more.

We can pour the water directly on the marble, and the marble will automatically filter out the dirty things in the water, such as hair, which should be taken off by hand, and cannot flow into the sewer with the water, or it will easily cause blockage, marble is not an expensive material, and ordinary families can afford it, and they are not afraid of increasing the economic burden.

However, marble also has certain disadvantages, after a long time, there will be dust and dirt in the cracks, and it needs to be cleaned regularly to keep it clean and tidy, if it is not cleaned in time, it will become very dirty.

If you don't want to tile the bathroom, you can put that kind of carpet in the bathroom.

In the case of carpets, when they encounter water, they will first cause people to slip and fall, so it is especially suitable for families with elderly people in the house.

You can choose terrazzo instead of tiles, because terrazzo is also more waterproof. It's also easier to clean.

Directly with cement, directly with cement paving, which not only saves money but also creates an industrial style.

The bathroom wall can be decorated without tiles: if the wall of the shower room is not tiled, waterproof materials, moisture-proof wallpaper, mosaics, anti-corrosive wood floors, sauna boards, natural marble, granite, PVC plastic gusset boards, plastic aluminum alloy plates and bathroom mirrors can be used to replace wall tiles, but the premise is that the waterproof materials at the bottom of the bathroom and the wall must be done well, because it is very easy to fall off after a long time in a humid environment.

It is possible to use only concrete without tiles, and the previous toilet will be directly covered with cement mortar, which is not easy to absorb moisture, and can also maintain the walls. After the end of the concrete floor, use 30 thick C25 bean stone concrete mixed with 10% waterproof layer nanocrystalline waterproof coating as a plastering layer. After the wall masonry is completed, the mixed mortar is added with 10% waterproof layer nanocrystalline waterproof coating, and the thickness of 20mm and 25mm is applied in 2 times.

Look at the flatness of the gas from the side to see if there are holes of the same size on the surface of the wall tiles. When examining the relative density of wall tiles, we can gently tap on the relative density of wall tiles. The sound is clear and beautiful.

Better wall tiles. These wall tiles are not easy to destroy and are easy to clean.

Drop a drop of water on the north end of the wall brick. Let's look at the level of propagation of water droplets. The slow spread of water droplets indicates that the wall tiles have low water absorption and high quality.

The wall tiles are highly absorbent and do not dry easily in the bathroom. High-quality wall tiles have low water absorption. After everyone takes a shower or absorbs moisture, the water will dry out quickly, and it is not easy to fall damage due to water retention on the road.

The surface of the wall tiles has a layer of glaze. We can tell by the thickness of the glaze. Gently scratch with a key.

If there are scratches, it means that the pocket is not black and white. If the glaze layer is polished and polished, the brick surface is not easy to clean, and it is very easy to hide dirt, which lacks a certain safety factor.

It is best not to choose some wall tiles with no glazed surface, because the toilet is a closed and humid environment, the air vents in the wall tiles should not spread water vapor, but will breed bacteria. Before the decoration, I firmly believe that everyone has a certain grasp of the bathroom, many people when the bathroom is decorated, the road surface and the wall will be pasted with floor tiles, floor tiles and other raw materials have a waterproof and moisture-proof effect, it is very convenient to clean, the price is cheaper than other materials, you can use this kind of raw materials to create your favorite design style, but floor tiles such raw materials have certain defects.

The floor tile drainage pipe is very poor, and the appearance is smooth and clean, if you don't pay attention to the use of the toilet, it is very easy to fall, especially in the home of the elderly and children, there will be potential safety hazards. Smart people will paste natural marble in the bathroom, natural marble raw materials do not have to worry about being wet and cold, the appearance looks very good, marble is very strong, there are many color styles, strong selectivity, can make the bathroom drainage rate accelerated, with marble decoration out of the bathroom, is very beautiful and durable, design style is more.

When decorating the wall, you can not stick tiles, but the wall waterproof must be done, steel structure decoration materials as a traditional waterproof and rust-proof material, bathroom decoration is inseparable, at present, the silver stainless steel market alternative mosaic will create a cold and avant-garde bathroom, which will give people a visual impact effect, so that the new space three-dimensional. It is used by more and more households.

The wall of the bathroom can not be tiled, or it can be made of latex paint, and the bathroom must be waterproof when decorating. If you don't have tiles, you can do some simple decorations.

It is also possible to choose not to stick tiles, and you can choose some PVC material decorations for decoration, which is very waterproof.

Check whether the original tile caulking work is dense and whether there are any omissions? For example, what is the quality of the caulking work around the corners of the wall and the gaps between the tiles on the floor? Once the quality is found to be unqualified, it should be dealt with in time to avoid water seeping from the gap into the toilet caisson and causing leakage.

Because the bathroom was waterproofed once when the house was delivered, if the waterproofing was done at the time of delivery, it was no problem. If there is only water leakage here, re-do the waterproofing near the floor drain and close the part between the pipe and the ground with a plugging spirit.

The floor of the bathroom and the corresponding wall part have a mandatory procedure in the decoration, that is, waterproofing. Because once the bathroom is not waterproofed, the water may slowly leak downstairs in the later stage, or penetrate into the other side of our wall, causing us a lot of trouble. For you in this case, it is more troublesome, if the developer has brushed a waterproof, it may be better, but if there is a change to the water or the ground is slotted, it will not work, and the wall must be slotted by the electrician There is a high chance of water seepage.

There is also a kind of waterproof material, the name can not be remembered, it belongs to the principle of infiltration, that is, the use of gaps, directly to the tiles, so that the waterproofing agent penetrates into the gaps, and after penetration, it will crystallize to form a waterproof layer. Note that it is necessary to use more and try to make the waterproofing agent penetrate to the fullest. There are also a lot of surface waterproofing on the market that can be sold, and it can also be used for temporary brushing, but the symptoms are not cured, waterproofing is like building a house to lay a foundation, and there is no remedy.

The bathroom wall waterproofing is not a bit troublesome to do, you need to remove the row of tiles near the root of the wall, and re-paste it after waterproofing; If the bottom wall of the bathroom wall is not done, all the floor tiles need to be removed, and the waterproof layer should be paved and then tiled; If the bathroom drain pipe is damaged, you need to find the leaking drain pipe and replace it with a new one.

Anyone who tells you that caulking, grouting, or brushing waterproof glue and transparent waterproof paint on the surface of the tile is not long-lasting, but only a temporary water stop, and it will also affect the appearance. After a long time, the ground is trampled and worn, and the alkali erosion of the bath water will make the above fail. You don't want to just renovate the bathroom.

There must be a lot of disadvantages, such as the walls are always very wet, and the space is also very damp, which is also very bad for our family, and finally the wall skin will always fall off from time to time.

If the bathroom is not tiled, the wall skin will quickly be eroded by water vapor and cause it to fall off.

If you don't stick tiles, the bathroom will definitely be very damp, which will directly affect the dampness of the wall of the bathroom cement, and it is not beautiful.

The waterproofing is not good, because once the bathroom is not waterproofed, the water may slowly leak downstairs in the later stage, or penetrate into the other side of our wall, causing us a lot of trouble.

If the bathroom is not tiled, then it is difficult to clean, and the smell will be more serious, tiled will be more convenient, and more bright, at least will not be slipped.

There is a big disadvantage, first of all, there will be some mold due to frequent dampness. Secondly, it is easy to let the wall skin fall off because it is not waterproof, so be sure to tile the bathroom.

1. Can the bathroom wall be without tiles?

When decorating the wall, you can not stick tiles, but the wall waterproofing must be done, there are many decorations for wall waterproofing, see which material is suitable for the decoration of your bathroom wall.

Second, the bathroom wall can not be tiled, how to decorate without tiles1. Wood

Special wood panels suitable for bathrooms are usually treated with special treatments such as waterproofing and anti-corrosion, although it retains the excellent properties of natural wood and is not afraid of blisters, and there is no need to worry about mold and rot. Technology"Plate sauna cons liquid line"is relatively mature, and it is necessary to brush matte varnish or tung oil to prevent moisture during installation.

2. Steel structure decoration materials

As a traditional waterproof and rust-proof material, the decoration of the bathroom is inseparable, and currently, the alternative mosaic of the silver stainless steel market will create a cold and avant-garde bathroom, which will give a visual impact effect and give this space a new three-dimensional sense of space. It is used by more and more households.

3. Waterproof coating

The bathroom is a damp space in the home, so the first problem to be solved is the impermeability of the bathroom. If you can guarantee a waterproof and perfect condition of the bathroom, then it is impossible to put a bright layer in the bathroom. Waterproofing coatings are a good choice.

Special coating formula waterproofing adds special waterproof and breathable molecules to form a dense membrane of the coating, which will completely block moisture and ensure respiratory function of the wall. Secondly, the waterproofing coating makes the structure simple and easy, presenting a unique visual effect.

4. Waterproof wallpaper

Like waterproof paints, waterproof wallpaper is also waterproof and moisture-proof. Of course, the bathroom is a common space in the home. It is also a major concern for ease of cleaning.

As long as you have a soft, dry cloth, you can easily clean the water spots on the buried surface. However, the use of waterproof wallpaper has certain space constraints and is suitable for bathrooms with plenty of space.

You can get it for free

Bathroom decoration is a very important project in home improvement China, so it has attracted the attention of many owners. Most of the exam questions will be tiled when decorating the bathroom, but a few families do not plan to put tiles in the bathroom, so is it okay to not put tiles in the bathroom? What are the tips for paving wall tiles in the bathroom?

1. Is it okay to have no tiles in the bathroom?

If you don't plan to pave tiles in the bathroom, you should do a good job of waterproofing, and then lay a layer of parapet film after the paint to avoid water penetrating into the paint and causing the wall to fall off, but in the long run, it is recommended that you pave tiles in the bathroom.

Second, what are the skills of paving wall tiles in the bathroom.

1. When paving bathroom wall tiles, you should first understand the proportion of cement slurry, bathroom wall tiles are paved with No. 425 cement, and the mixing ratio of this kind of cement and sandpaper is 1:3, which shall not exceed this ratio, because in the case of too heavy cement content, it is easy to cause the problem of wall tile cracking.

2. It is recommended that you use glazed tiles for bathroom wall tiles, if you plan to use cement slurry as a binder for wall tiles, before paving wall tiles, you need to put the wall tiles into water for full wetting, but the soaking time can not be too long, generally only need to soak for 30 minutes.

3. When paving bathroom wall tiles, regardless of whether the wall tiles are seamless bricks or not, there should be gaps when paving, and the gaps should not be less than 1mm.

Summary: The relevant content of the bathroom is not tiled is introduced here, I believe that we have a better understanding of the laying of bathroom tiles, and I hope to help friends in need. It is best to lay tiles for bathroom decoration, because the bathroom environment is relatively humid, and water is often used, and not paving tiles will shorten the service life of the coating, and later maintenance will be more troublesome.