How to remove the Windows login password

1.Start Windows XP at boot, when the screen shows the steps of "Booting Windows XP", press the "F8" key to bring up the system boot selection menu, and select the "Safe Mode with Command Line" command item;

2.After a while, list the selection menu of administrator and other users, select administrator and press enter, enter to enter the command line mode;

3.Type the command "net user usera 123456 add" (excluding em-width quotation marks, the same below), and after entering, the system automatically adds the user with usera as the name and password as 123456.

If there is already a usera user in the system, then you can also change the password of the existing usera user to 123456, note that you can change it without entering the original password;

4.Then, use the "net localgroup administrator usera add" command to elevate the usera user to the administrator level, that is, the operating system with all permissions;

5.The last step is to restart the computer, use the newly added account in the login window, enter the new password you just changed, and you have successfully logged in.

Buy a system disk, the kind of ghost, many have to clear the system password. Ask the seller when you buy it and he will tell you.

If you can't do it, you can buy a decrypted disc and get the password.

You can crack it with a system disk!!

Take out the small battery from the main unit and put it on.

In the "User Account" section of the control panel, you can set it up.

If you forget the login password when entering the system, press F8 during the boot process to enter the safe mode and change the password when entering the control panel. After reopening the program.

Start --> run --> input: regedit

Found: HKLM\Software\Microsoft\Windows\CurrentVersion\WinLogon

In the right window, create a new name named .

autoadminlogon, set the value to 1, and then create the string values of DefaultUsername and DefaultDominName, which correspond to the default username.

Press F8 to enter the safe mode with a command character.

Then go to administrators

Accounts. Enter in the command window.

Command. net

user your username.

1234 (new password) add

That's it.

Use DOS to go to C: Windows System32 Config SAM

Delete this file on it.

If you have a password set for your local account, but you want to log in to Windows without using a password, you can cancel the password for your local account by referring to the following methods.

Tap [Login Options], then tap [Password] and click [Change].

<> tap [Done]. The password cancellation is complete, and the next login will allow you to log in to Windows without a password.

There are two ways to do this, and here's how to do it:

1.In the Start menu, enter "control userpasswords2" in Run and press Enter, open the User Account dialog box, unselect the option "To use this machine, the user must enter a username and password" option on the Users tab, and click Apply. The automatic login dialog box will pop up, enter the username and password here, and click OK.

2.Go to the user account on the control panel.

Change an administrator's account Change their password.

After entering the current password, leave the new password and confirmation blank and leave the password clear.

Point Start-Run; Enter the following.

control userpasswords2 or rundll32, usersrundll remove the tick in "To use the machine, the user must enter the username and password" in the application to enter the username and password in the dialog box.

Reboot if you can't log in automatically.

windows registry editor version;XP auto-login.

hkey_local_machine\software\microsoft\windows nt\currentversion\winlogon]

autoadminlogon"="1"

defaultusername"="Login username"

defaultpassword"="Password"

The above is saved as:"Automatic login. reg"Dual while importing the registry automatically logs in to Windows XP

Or run the registry modification manually.

In [Start] --Run] --Type [regedit] --select [hkey local machine]--software] --microsoft]--windows nt]--currentversion] -- change the [autoadminlogon] value data in the window to the right of [winlogon] to [1] and change [defaultusername] The numeric data is changed to [Set the name of the auto-login user account], and a string value [defaultpassword] is added to the numeric data [Set the password for the auto-login user account].

If you have an XP system, you will be given a DOS tool when you install the system.

There is an option to eliminate the NT password If you can read Chinese, you can.

Every step you take, there's a new hint that's good and neat.

Hello, it is an honor to serve you.

Question: How to remove the login password of Windows? Solution:

Use the "computer store super USB flash drive startup maker" to make the USB flash drive into a boot disk, and after the successful production, it contains a variety of maintenance tools, "crack the Windows system password tool" is one of them. I carry this kind of U disk maintenance disk with me, and it is a daily must-have for computer staff! Plug the USB flash drive into the computer and enter the BIOS to set up boot from the USB flash drive.

Select "Run Windows Login Password Crack Menu" and press enter.

There are two options here, if you forgot the password on your computer, it is recommended to choose "Clear Windows login password", the password is gone after clearing the password, and you can reset it after entering the system. Select "Bypass Windows login password", only allow to log in once, and verify the password after one time, for those who want to log in to other people's computers, and don't want to startle friends is no better. I'm now assuming that your own computer has forgotten your login password and choose the first one.

The Windows login password is stored in the SAM file in the form of encryption, which cannot be decrypted, so it can only be clear or bypassed, but not viewed. Generally, SAM files are placed in Windows system partitions, so you can choose 1 to search for system partitions directly, but sometimes SAM files may be transferred to other partitions, resulting in cracking failure. For the sake of conservatism, it is recommended to choose 2, search all partitions, until the SAM file is "pulled out", although it will take a little longer, but in my personal experience, it is more reliable.

The sam file is found, press Enter to continue.

Try to clear the password of the *** user, select 1 and press enter.

Press the "Y key" to clear it.

That's where the password is cleared. Press any key to return to the previous menu, and you can select another user to clear it.

Restart the computer, the password is gone, and you can enter the desktop by clicking directly.

The most complete strategy. Yours is my driving force!

Go online under a program called.

Then run into DOS.

Chinese interface. Just follow the prompts.

First, click Change Password and enter the original password.

Don't enter the new password! Click OK directly, and there will be no password!

Deep mountain autumn leaves pocket pe toolbox.

It is engraved into a disc and used.

First of all, after opening the Windows 10 system, right-click the start button in the lower left corner of the desktop, and click the "Run" menu item in the pop-up menu.

Please click Enter a description.

At this time, you can open the Windows 10 system running window.

Please click Enter a description.

Then enter the control userpasswords2 command in the pop-up window and click the OK button.

Please click Enter a description.

In the user account window that opens, uncheck the box that says "To use this computer, the user must enter a username and password" and click the Apply button.

Please click Enter a description.

In the pop-up window, enter the username and password for automatic login, and finally click OK to save and log out.

Please click Enter a description.

After restarting the computer, you can automatically log in without entering the login password the next time you turn on the computer.

Please click Enter a description.

1. Click the "Start" button of Windows 10 and continue to click on the "Settings" option;

2. Click on the "Account" option;

3. Click on the login option, and then you can see the password to change this setting on the drop-down page.

4. In this option, we can see that if we want to change the password, we only need to press and hold Ctrl+Alt+Delete at the same time, and then we will enter the password change page.

Then we click on Change Password, and then follow the prompts to leave the password blank.