Joyoung rice cooker is powered on for a period of time and does not heat up?

The rice cooker is powered on for a period of time, if it is not heated, it should be related to the heating element in it, maybe you have been using it for a long time, the heater inside is not good, take a look, is it dirty? You can wipe the dirty things for him, and try it again after removal, if it doesn't work, it is recommended to overhaul it.

Joyoung rice cooker will not heat up after being powered on for a period of time, which is a quality problem, it may be a problem with the line contact, or a problem with the heating plate. Further inquiries are required from after-sales service.

This must be that you set a certain gear, and when the temperature of the cooking reaches a certain level, it will automatically turn off the power.

Joyoung microcomputer rice cooker does not work after heating for a while, it does not cook rice, generally there is a fault, is there a temperature sensor glued to the arm of the heating pot with aluminum foil, I only measure to 10k, how big should it be,

Generally, good electrical appliances will not be like this, it may be out of order, and it needs to be repaired.

Joyoung rice cooker is powered on for a period of time and does not heat up? Did you cut off the power? Still is? The rice cooker is faulty, you need to look at the manual to check.

Joyoung rice cooker is powered on for a period of time and does not heat up? It's a faulty circuit.

This shows that there is a problem on the ** surface, which can be repaired, but it is not very serious.

Hello friend, it is a circuit failure, it is recommended to contact the manufacturer after sales to overhaul.

It may be that the power cord is loose, and the serious thing is that the over-temperature insurance is broken.

Precautions for the use of rice cookers:

2. The power supply of the rice cooker should use a separate socket, do not use a line with other high-power electrical appliances at the same time, the plug should be plugged in tightly, the rice cooker should not be used in a humid place, and a reliable grounding wire should be used to avoid electric shock and injury when leakage.

3. Before using the rice cooker, remove foreign objects on the surface of the electric hot plate of the rice cooker and the chassis of the inner pot, and the bottom and edge of the inner pot of the rice cooker should not collide with hard objects to avoid deformation, resulting in poor contact and damage to the electric hot plate of the rice cooker.

4. The rice cooker should not be used to cook acid and alkaline food, so as not to corrode or damage the rice cooker. If you can't finish eating, you can't let the dishes be stored in the pot overnight, and they should be put in the refrigerator to keep them fresh to avoid becoming rancid and sour.

5. The automatic rice cooker should not be burned empty. The rice cooker is in a state of heat preservation just after cooking, and after opening the lid, you should press the Cancel button to retreat the heat preservation heat into standby and unplug the power plug. Otherwise, the thermostat for heat preservation is still working, and frequent action will easily damage the thermostat and damage the electric heating plate.

When my Joyoung rice cooker is cooking rice. Heat for a while and the power goes out? Heat for a while and the power goes out? It could be your rice cooker. The circuit is open. Find someone to fix the electrical appliances. Fix it. That's it.

Answer: The rice cooker has a magnetron switch at the bottom, when we put the rice and water on the inner tank of the rice cooker, the magnet switch needs to be opened by hand, the rice cooker starts to heat, when the temperature reaches 103 degrees Curie temperature point, the magnet loses its suction power and the switch is powered off, (the Curie temperature point of different materials is different), the rice cooker enters the insulation program, when there are rice grains in this magnetron switch, or there are cockroaches crawling into the magnetron switch, it will cause the temperature to be cut off in advance when the temperature does not reach 103 degrees, So this switch should be checked emphatically, you can turn the rice cooker back to the bottom and press the switch repeatedly, shake the rice cooker to pour out the rice grains or burned cockroaches that fell into this switch, which can have the effect of getting twice the result with half the effort. Of course, if the rice cooker leaks electricity or the lead wire is loose, there will be a phenomenon that the power will be cut off as soon as it is heated.

Check if the power cord is loose, or try to change the socket again.

If this kind of problem occurs, I think the most important thing is that there must be a problem in this rice cooker, so you should take a good look at the problem inside.

Hello, first of all, the electric pressure cooker cooks rice for a few minutes and jumps halfway to keep warm for the following reasons, 1The temperature sensor in the pot is damaged, cracked or malfunctioning, causing the rice to jump to the state of keeping warm when it is not cooked. 2.

The poor performance of the pressure switch causes the phenomenon of jumping when the rice is not cooked. 3.The computer board program error caused the work to jump to the insulation state after a few minutes.

4.The corresponding solution to the above problems: the temperature sensor is damaged, you can directly replace the original model of the temperature sensor, make sure that it works normally, and replace it as a whole or separately disassemble the internal thermal electric reed resistance to replace, and be sure to add thermal grease to ensure normal heat transfer.

5.The pressure switch bimetal sheet has poor performance, the pressure switch of the original specification can be directly replaced, and the pressure in the pot must be re-tested after installation to ensure that it is within the normal value range. 6.

The computer board program is wrong, and you can only replace it with a brand new computer board to make it work properly.

The Joyoung rice cooker is powered on and the indicator is normal, but it doesn't heat up.

Hello, Joyoung rice cooker power-on indicator is normal, but it doesn't heat up1The reason why the rice cooker does not heat may be that the fuse resistor is burned out, and the fuse resistance of the rice cooker may be burned out because there are foreign objects on the bottom of the pot or the heating plate, so that the inner pot of the rice cooker can not fully contact the heating plate, if the temperature of the heating plate is too high, it will cause the fuse resistor to burn out, but at the same time it protects the heating plate of the rice cooker, carefully check the foreign body at the bottom of the rice cooker or the heating plate, remove the foreign body and clean the bottom of the pot or the heating plate, and be careful not to throw off the fuse resistor. The bimetal sheet used to keep the heat of the rice cooker is accidentally adhered to the contacts, which is easy to cause the fuse to be burned out due to continuous heating, so pay attention to replacing the bimetal sheet.

2.If this is the case, it is necessary to carefully trim the inner pot deformed and restored to the original state, and the repaired inner pot can still be used, but the heating plate that has been deformed cannot be used, and it should be replaced with a new oneIf the heating plate of the rice cooker is in an open circuit state, the rice cooker will not be able to heat, so it should be carefully inspected and repaired.

The Joyoung rice cooker is powered on and the indicator is normal, but it doesn't heat up.

Dear, I'm glad to answer for you: Joyoung rice cooker has a normal power-on display, but it doesn't heat up What is going onAnswer: 1. It may be that the temperature control of the rice cooker is faulty:

Ordinary rice cookers are mainly composed of a heating plate, a temperature limiter, a heat warmer, a fuse power connector, a heat preservation indicator and a resistor, a rice cooking indicator and a resistor. If the thermostat or warmer is damaged, the rice cooker will not work when it is powered on. In particular, the contacts in the thermostat are consumables, and if you have the ability, you can open the bottom three screws of the rice cooker to see if its contacts are blackened or burned.

If the capacity is insufficient and the replacement is difficult, it can be sent to the after-sales warranty or professional maintenance organization for repair. 2. It may be the fault of the heating plate: when the temperature is lower than 60, the heat warmer is connected to the power supply to make the heat plate work, when the temperature of the heat plate is 80, the internal thermal expansion and cold contraction of the heat warmer is disconnected, and the power supply to the heat plate is stopped by disconnecting the contact.

If the heating plate is damaged, the process will not work properly. If you have the ability, you can use a multimeter to measure whether the heating plate has a resistance value, if the resistance value is infinity, it means that the rice cooker is not working because the heating plate is damaged. If the capacity is insufficient, it can be sent to the after-sales warranty or professional repair organization for repair.