Regarding automotive silicone oil fans, can ordinary cars change silicone oil fans?

1) Silicone oil fan clutch, using silicone oil as the medium, using the high viscosity characteristics of silicone oil to transmit torque. Using the temperature of the air behind the radiator, the disengagement and engagement of the fan clutch is automatically controlled by the thermostat. When the temperature is low, the silicone oil does not flow, the fan clutch disengages, and the fan speed slows down, basically idling.

At high temperatures, the viscosity of the silicone oil binds the fan clutch, so that the fan and the pump shaft rotate together to regulate the engine temperature.

The silicone oil fan clutch and temperature sensing element are all bimetal coil spring thermostats. Its working process:

1) When the temperature of the air flowing through the radiator rises, the bimetal thermostat is deformed by heating, forcing the valve shaft to rotate and open the oil inlet hole on the driven plate. The silicone oil stored between the driven plate and the front cover flows into the working cavity between the driven plate and the driven plate, the clutch is engaged, and the fan speed increases. The higher the air temperature, the larger the opening of the oil inlet hole, and the faster the fan speed.

2) When the temperature of the air flowing through the radiator drops, the bimetal thermostat returns to its original state, the valve plate closes the oil inlet hole, and under the action of centrifugal force, the silicone oil returns to the oil storage chamber from the working cavity through the oil return hole, the clutch is separated, and the fan speed becomes very low.

2) Cars and trucks are available.

3) The processing process is not very complicated, simply put, the silicone oil is poured into the oil storage cavity of the fan. (This oil storage chamber is reserved for machining).

4) In the past few years, silicone oil is more expensive, and now the national standard silicone oil is about 25,000-32,000 tons, and the special model is high. For example, the production of silicone oil fans requires high viscosity (generally the viscosity of silicone oil is between 10000-100000,)

5) Because silicone oil has super high and low temperature resistance (can be between -50 degrees - +180 degrees) for long-term use, physiological inertness, good lubricity, so it has the incomparable advantages of other lubricating oils.

6) **Slightly higher than other lubricants**.

Hello, the higher the temperature of the silicone oil fan, the thinner the silicone oil, the smaller the resistance, and the faster it turns. Otherwise, it will turn slowly. When the engine temperature is very high, it works at full speed. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

No. The vast majority of vehicles using silicone oil fans are some off-road vehicles, vans, semi-trailers, trucks. Due to the reliability and durability of silicone oil fans, it is natural that these cars basically like to use silicone oil fans.

The vast majority of vehicles using silicone oil fans are off-road vehicles, trucks, semi-trailers, and trucks. Due to the reliability and durability of silicone oil fans, it is natural that these cars basically like to use silicone oil fans.

Most family cars basically use electronic cooling fans, which rely on sensors to adjust the fan switches. This kind of fan may have some malfunction problems when used for a long time. If the cooling fan has a faulty problem, it will affect the heat dissipation of the engine, which will affect the normal operation of the vehicle.

Most vehicles use water-cooled engines, which rely on antifreeze to circulate heat through the engine. Vehicles equipped with water-cooled engines have a cooling water tank at the front of the vehicle, and the temperature of the high-temperature antifreeze decreases after passing through the cooling water tank. The fan behind the cooling tank sucks air inward, which will speed up the airflow through the cooling tank, which can help the cooling tank dissipate heat.

If the fan has a faulty problem, it will affect the heat dissipation of the water tank, which will affect the temperature of the antifreeze too high.

Of course, large trucks, semi-trailers, and off-road vehicles basically use silicone oil cooling fans with better reliability and durability. If there is a problem with the silicone oil fan, the shaft can be fixed immediately, so that the sub-fan can also operate. The silicone oil fan has a silicone oil clutch in the middle, and when the temperature rises, the silicone oil clutch will be combined, so that the sub-fan can run to dissipate heat from the water tank.

Photo by Q&A) NIO EC6 Xpeng P7 Marvel R VOYAH Free Audi A4L Model Y @2019

The vast majority of vehicles using silicone oil fans are off-road vehicles, trucks, semi-trailer trucks, and trucks. Due to the reliability and durability of silicone oil fans, of course, these cars basically like to use silicone oil fans.

Most family cars basically use electronic cooling fans, which rely on sensors to adjust the fan switches. This kind of fan may have some problems after a long time. If there is a problem with the cooling fan, it will affect the engine cooling, which will affect the normal operation of the vehicle.

Most vehicles use water-cooled engines, which rely on antifreeze to circulate heat through the engine. Vehicles equipped with water-cooled liquid-style engines have a heat dissipation number indicator tank at the front, and the temperature decreases when the high-temperature antifreeze passes through the radiator tank. A fan behind the cooling tank draws in air, which speeds up the flow of air through the cooling tank and helps the tank dissipate heat.

If the fan fails, it will affect the heat dissipation of the water tank, which in turn will affect the high temperature of the antifreeze.

Of course, large trucks, semi-trailers, and off-road vehicles basically use silicone oil cooling fans with better reliability and durability. If the silicone fan fails, the shaft can be repaired immediately so that the fan can also run. There is a silicone clutch in the middle of the fan.

When the temperature rises, the silicone oil clutch binds to run the fan and dissipate heat from the tank.

Well, that's the end of Bian Xiao's explanation. So, do you know what kind of silicone oil fan for cars? I hope Bian Xiao's introduction can help everyone. Thank you very much for stopping by and look forward to your next visit.

What cars use silicone oil fans? Most of the cars that use silicone oil fans are some off-road weighing trucks, vans, semi-trailers, trucks. Because the reliability and durability of silicone oil fans are relatively high, these cars prefer to use silicone oil fans.

Some family cars will use electronic cooling fans, which rely on sensors to control the fan switches. This fan may have some malfunctions when used for a long time. If the dismantling sail heat fan fails, it will affect the engine heat dissipation, which will lead to the use of silicone oil fans in the car has:

Off-road vehicles, vans, semi-trailers, trucks. Silicone oil fan, also known as silicone oil fan clutch, uses silicone oil as the medium to use silicone oil shear viscosity to transmit torque, and its functions are: 1. Adjust the cooling intensity of the engine at any time; 2. Reduce fan power consumption, noise and wear; 3. Prevent the engine from overcooling, reduce pollution and save fuel.

The working principle of the silicone oil fan is as follows: when the engine load increases and the coolant temperature rises, the high-temperature air flow blows on the bimetal thermostat, which deforms the bimetal sheet by heating, and drives the valve plate transmission pin and controls the deflection angle of the valve plate. @2019

Most of the vehicles that use silicone oil fans are off-road vehicles, trucks, semi-trailers, and trucks. Because the reliability and durability of silicone oil fans are basically high, naturally these cars basically like to use silicone oil fans.

Most family cars basically use electronic cooling fans, which rely on sensors to adjust the fan switches. This kind of fan can be a bit troublesome to use for a long time. If the cooling fan fails, it will affect the cooling of the starting blocker, which in turn will affect the normal operation of the vehicle.

Most vehicles use water-cooled engines, which rely on antifreeze to continuously circulate heat in the engine. Vehicles with water-cooled engines have a radiator tank at the front of the vehicle, and the temperature decreases after the high-temperature antifreeze passes through the radiator tank. The fan behind the radiator tank draws in air, which will speed up the airflow through the radiator tank and help the radiator tank dissipate heat.

If the fan fails, it will affect the heat dissipation of the water tank, which in turn will affect the high temperature of the antifreeze.

Of course, large trucks, semi-trailers and off-road vehicles basically use silicone oil cooling fans with better reliability and durability. If there is a problem with the silicone oil fan, the shaft can be repaired immediately so that the fan can also operate. There is a silicone clutch in the middle of the fan.

When the temperature rises, the silicone oil clutch binds so that the fan can run and dissipate heat from the tank. Alright, that's the end of my explanation. So, do you know what silicone oil fan for cars is?

What kind of car does use silicone oil fanMost of the cars that use silicone oil fans are off-road vehicles, trucks, semi-trailers, and trucks. Because of the high reliability and durability of silicone oil fans, these cars prefer to use silicone oil fans. Most household cars use electronic cooling fans, which rely on sensors to control the fan on and off.

This fan may have some faults when used for a long time. If the cooling fan fails, it will affect the heat dissipation of the engine, which will lead to the failure of the car. Most cars will use water-cooled engines, which rely on a constant circulation of coolant in the engine to dissipate heat.

Cars with water-cooled engines have a radiator tank at the front, and after the high-temperature coolant passes through the radiator tank, the temperature drops. The fan behind the radiator tank draws in air, which will speed up the flow of air through the radiator trap tank and help the radiator tank dissipate heat. If the fan fails, it will affect the heat dissipation of the tank, causing the coolant temperature to be too high.

As a result, large trucks, semi-trailers, and off-road vehicles will use silicone oil cooling fans with better reliability and durability. If the silicone oil fan fails, the shaft can be fixed directly so that the fan can also rotate. There is a silicone clutch in the middle of the fan.

When the temperature rises, the silicone oil clutch binds so that the fan can spin to dissipate heat from the tank. Millions of car purchase subsidies.