How to flash your phone with vivo.

1. Vivo phone users can try to enter the recovery mode to flash.

3. Then you can enter the recovery mode, turn off the phone first, and then press and hold the volume plus power button at the same time to enter the recovery mode.

4. After entering, try Shuangqing first and select WIPE

data/factory

reset to erase all data, that is, to restore factory settings, then press the power button to confirm, and then select yes

delete

alldata, yes, you can clear all data.

5. Select WIPE

CachePartition, then press the power button to confirm, and then select YesWipecache.

6. Select install

zipfrom

sdcard, select choose

zipfrom

7. The mobile phone will automatically execute the flashing procedure, and the mobile phone will automatically enter the system when the flashing is completed.

Press and hold the power button and the volume up button at the same time in the shutdown state until the word vivo appears and then release it, the phone will automatically enter recovery mode, select "Clear Data" and "Clear All Data" to clear these two data.

2.Open the line brush, switch to the one-click brick rescue interface, and click the "OK" button after completing the "Confirm steps before flashing".

3.If you have a local brushless package, you can enter the model in the search box, click the "Search ROM" button, and click the "One-click Flash" button in the search results to start flashing the package-**After completion, click "Flash Now" to start flashing:

4.If there is already a flash package locally, click the "Select Local ROM" button to open the interface for selecting a RAM package, and click the "Open" button after selecting the flash package

5.Enter the parsing package page

6.After the unpacking is complete, start scanning the flashing port:

7.Install the flashing driver:

If it is the first time to start the line brush, or you have not installed the flash driver, please click "Fully automatic installation of the flash driver":

Enter the installation driver interface, if the Windows security prompt pops up, click "Always install this driver software":

8.After installing the driver, if the port cannot be scanned for a long time, you can manually enter the flash mode according to the interface operation guide

10.Jump to the flashing success interface, and the flashing is complete!

You can use the mobile version of the flashing master to flash the phone. The operation is simple, and the steps are as follows:

How to flash vivo mobile phone, specific steps?

1. Prepare the relevant tools for flashing the sail family. The first step we take to flash a vivo phone is to prepare a flashing tool. Generally, we need to prepare a computer, a vivo mobile phone to be flashed, and its original data cable.

2. Next, we use a flashing software on the computer, which is generally a flashing wizard. Then through this flashing software**, the flashing package of a vivo mobile phone is ready to use.

3. Then we will connect the vivo phone with the computer, note that the original data cable of the vivo phone must be used. You also need to operate the vivo phone to enter the flashing mode before you can flash the phone. The specific method is on the mobile phone instruction manual.

4. Now we click on the button on the computer to start flashing, so that the flashing software will start to flash the machine automatically. This process usually takes about 20 minutes.

5. After the flashing is completed, the mobile phone will prompt us to complete the flashing, at this time, we will disconnect the vivo mobile phone from the computer, and then set the basic information of the mobile phone to use.

Note: Under normal use, it is not recommended to flash the phone. If the mobile phone system fails, it is recommended to go to the after-sales service for repair.

Steps to flash vivo phone: Press and hold the power button and volume up button at the same time in the shutdown state to enter recovery mode; Select Clear Data; Clear cached data; Clear all data and reboot.

Vivo phone flashing steps:

1. Press and hold the power button and the volume up button at the same time in the shutdown state until the word vivo appears and then release it, and the phone will automatically enter the recovery mode (some models of mobile phones need to press the volume button to manually select to enter the recovery mode).

2. Select Clear Data to enter the selection interface, there are two options: Clear Cache and Clear All Data.

3. Clear the cache data (equal to the English wipe cache partition) 4. Clear all the data (equal to the English wipe data factory reset), the flashing is completed, and the restart can be.