Why is the network speed slow in the Honor WIFI treasure room next to the bathroom?

The wall will block some of the signal waves, and the end result will be a slower network speed.

Some people think that if the signal is not good, it is enough to increase the megabytes. Of course, this is a way to increase the strength of the signal. However, the signal in some rooms is relatively weak, and solving this problem alone is still a symptom rather than a cure.

Because the building must use steel bar, as the main material in the building materials, it can make the building structure more stable. At the same time, it is also a big weakening signal"**"。

When the electromagnetic waves of the wireless router pass through the wall, the signal is already weakened, and then through the steel bars in the wall, the signal is greatly weakened. Experiments show that the influence on electromagnetic waves in building materials is in descending order: wood, gypsum board, concrete, and steel bar.

In other words, the different materials used in the wall have different effects on the signal attenuation. As a result, some rooms have a very poor signal and simply crash, while others have barely usable signal strength. In modern buildings, steel bars are the main material to ensure its firmness, and are mostly used in floor slabs, load-bearing walls, support columns, etc.

Because of its importance, many people believe that the more steel bar, the stronger it is. Actually, no, usually the grid of steel bars will be spaced about 10-20 cm apart. Instead of cast-in-place floor slabs, steel bars are also used in the production process, but finer or lower steel bars may be used, and some of the density is still the same.

This kind of floor slab has a relatively weak signal partition, so many times when arranging routers, it will avoid load-bearing walls, support columns and other walls with steel bars.

In addition, distance is also an important factor affecting the signal of the wireless network. The farther away the room is from the wireless router, the weaker the signal will be.

It's certainly not realistic for us to change the structure of the wall. Therefore, if you want to enhance the wireless network signal at home, first of all, when purchasing a router, you must choose a router with good transmitting power, good wall penetration, and fast transmission rate. Secondly, the scope of coverage.

If you are in a large house, you may want to increase the number of routers and set up wireless bridging between routers. Alternatively, there is a wireless extender on the market, which is also a great way to increase the signal strength.

Why is the network speed of this wifi in the next bathroom?,This is for sure.,There are blocks or other things that will affect the wifi signal.,So if you want a good signal,It must be carried out in that unimpeded environment.。

Why does the network speed of the Honor wifi room slow down next to the bathroom.

The first is that the WiFi signal weakens with distance.

There is also the fact that the building has a certain effect on the wifi signal.

As a result, the signal will be reduced and the network speed will be slowed down.

This is mainly due to signal shielding. The reason is that modern buildings have some steel bars in it, and the grid-like steel bars may form a shielding net, and at the same time, if the bathroom door frame is metal, it may also have a certain shielding effect. It is these reasons that will cause the wifi network speed in the bathroom to be slow.

There are many reasons why HUAWEI phones are slow to connect to Wi-Fi, and here are a few common causes and solutions.

1. First of all, you must confirm whether you use a metal protective case, which has an impact on the mobile phone antenna, which will cause the mobile phone signal to deteriorate, and you can use a plastic or leather protective case.

2. Secondly, it is best not to touch the WLAN antenna position of the mobile phone (the top of the mobile phone) with your hands, as the WLAN antenna position will cause great interference to the signal. If the mobile phone is far away from the Wi-Fi router or behind a partition wall, the signal strength will be weakened, resulting in a reduced network speed or poor signal, it is recommended to connect to the Wi-Fi near the router.

3. If multiple devices are connected to the same router, check whether the connection of other devices is normal, if the speed of other devices is normal, it is recommended to disconnect the connection of other devices and check whether the connection of the mobile phone is normal; If the signal is poor and the speed is slow after connecting other devices, it is recommended to change the router.

4. If there is still a reason after investigation, or the signal is poor or the network speed is slow, you can try to back up the data and update the system to the latest version.

5. In addition, the built-in software of Huawei mobile phones can also solve this problem

1) Open the built-in Phone Manager on your Huawei phone.

2) Find the "Power Saving Management" option and tap it (the default power saving setting here is Smart Power Saver, which does not use 100% of the network speed).

3) Swipe the screen; Choose a normal power-saving method; In this way, you can solve the situation of slow network speed.

It is recommended to change the password of the wireless router, you can try to change the WiFi encryption method of the router to: WPA2-PSK, the password encryption method of some routers may not be compatible with the mobile phone.

2.It is recommended to try to reset the static IP address of the phone.

3.It is recommended to back up your data and restore it to factory settings. Go to Phone Settings - Backup & Reset - Factory Reset - Reset Phone - Erase Everything.

Method steps.

Click on the connected wifi, the details of this wifi will be displayed, click "Cancel Save" below the message, which means that the previous login information of this wifi will be deleted, if you have not used the wifi that needs to be set before, the first two steps can be omitted.

Select and click on the wifi that needs to be set, re-enter the password, don't rush to connect after entering the password, and then follow the next step.

Continue to swipe up the information interface to see the two options of "Show password" and "Show advanced options", click the box in front of "Show advanced options", and continue to swipe on the screen after the tick.

After swiping up on the information interface, it will show **Set to none, IP settingThe default of the mobile phone is DHCP, that is, dynamic IP, here we want to set it to "static", click"dhcp displays the slide menu and select "Static."

After the IP is set to "static", there are several lines of information below, enter the IP address in the IP address bar, it should be noted here that the first three boxes of the IP address entered must be the same as the first three boxes of the gateway, and the latter box should be filled in one randomly in 1 to 99 and 101 to 255, but the number of the last box of the gateway should be different, remember! Remember!

The wifi signal is full, the network speed is slow, so as to improve the network speed, what is the router and 5G?

Set WLAN+ off in WLAN, which is perfectly solved.

First, first of all, we can see a lot of solutions in the help of WLAN, if you find it difficult to understand, long press the hotspot where the problem occurs and choose not to save the network, and then reconnect, everything from the beginning!

Second, if the first method does not work very well, then the more high-end one is coming. Or press and hold the hotspot where the problem occurs, select Modify Network and click Show advanced options.

After that, select the static IP address in the IP address, and modify the end of the IP address, the range that can be modified here is any number between 2 and 255, and you can save it after modification. Here it is recommended to choose a number that is not very commonly used.

There are multiple reasons why you cannot access the Internet or slow Internet access when you connect to the wireless router, please troubleshoot the following scenarios:

All apps can't access the Internet or have slow Internet access2. If you are using a network bridged by multiple routers, it is recommended to connect to the main router to check whether you can surf the Internet normally.

3. If you are using a VPN to surf the Internet, please disconnect the VPN and try it.

4. Try restarting your phone to see if you can surf the Internet normally. If the problem persists, back up your phone data and factory reset your phone to see if it is back to normal.

Some apps can't go online, or the internet is slow or some** are inaccessible

1. Please try to restart your phone, close the app completely and check whether you can surf the Internet normally.

2. Please check whether the mobile data or WLAN permission is turned off in Mobile Manager > Traffic Management > Application Networking.

3. If you have installed a third-party Phone Manager, please check whether the network access of the app is restricted, and it is recommended that you enable the network permission or uninstall the third-party Phone Manager and try again.

4. If you can, use other mobile phones to check whether the app can access the Internet. If you can't access the Internet, it may be that there is a problem with the app's server, so it is recommended to pay attention to the official announcement of the app or wait for a period of time before using it.

5. Please click App Market > Manage > Update Management to see if the app has a version update, if there is a suggestion to update to the latest version or uninstall and reinstall it and try again.

Unable to access the Internet or slow to connect to the corporate wireless network

1. Please confirm with the company's network administrator whether you need to verify or bind the device before you can access the Internet, please verify or bind the device as required and try.

2. Please confirm whether the company's network has permission requirements for accessing the network, if there are restrictions, please apply for relevant permissions and try.

3. If there are too many people connected to the company's network, the network speed may be slow or the Internet cannot be accessed, please wait before trying.

If your phone cannot access the Internet or is slow to access the Internet after connecting to Wi-Fi, check the following scenarios:

If these methods do not resolve the issue, back up important data in advance and bring the purchase receipt to the Huawei Customer Service Center for verification.

Slow home network access:

1) Please check whether the current router has a speed limit, if so, please set it again.

2) The operator has a limited speed, consult the operator to restore the network speed.

A single third-party application is slow to access the Internet

Slow Internet access on public networks:

Public networks, with a large number of users, will slow down the internet speed. Some public networks have speed limits and other limitations, so it is recommended to use the Internet at home to observe and try again.

Mobile phone sharing hotspots, other devices are slow to connect to the Internet:

1) The signal strength may be weak and the network speed may be reduced due to the distance between the mobile phone and the hotspot, please try close to the hotspot;

2) Check whether the traffic is restricted, if there is a limit, please set it to "unlimited" to try to solve the problem.

version: Set a single data limit for > Wireless & Network > Mobile Tethering > Portable Wi-Fi Hotspot >.

Slow Internet access with a weak signal:

1) It may be that the signal strength is weak due to the distance from the router or the partition wall, and the network speed is reduced, it is recommended to try close to the router;

2) Use a metal case, which will have an impact on the antenna of the phone or tablet, which will cause the signal of the phone or tablet to deteriorate and slow down, so it is recommended that you use a plastic or leather case.

Cascading network is slow to surf the Internet:

1) Please try to connect to the main route;

2) Check whether the mobile phone is connected to the hotspot or 5G, if so, please select the 5G hotspot to try.

After using the Bluetooth function (using Huawei Share, connecting Bluetooth speakers, headphones, etc.), the Internet access slows down.

Hello, if it is a public wifi, it may be due to a large number of people, and the network speed may not be able to cause this problem.

If it's wifi at home:

1. When connecting to WiFi, try not to hold the gap above the volume button, which may affect the reception of WiFi signal.

2. Connect to wifi as close as possible to the router, not over a wall or too far away.

3. If the mobile phone has a metal phone case, take it off.

4. After successfully connecting to WLAN, surf the Internet within the effective distance of the WLAN hotspot to avoid automatic disconnection due to weak network signal due to too far distance.

5. Then click the Settings Wi-Fi menu -- Advanced Settings , keep Wi-Fi connected in hibernation -- Always, the phone will always be connected to the Wi-Fi network. Now you can try to restart your phone or router and reset the password for the router.

Update the version of the mobile phone, whether there is a network problem, the traffic is normal, troubleshoot the mobile phone problem, and check the network or wifi function.

Me too, it's normal to use data to access the Internet, but when I use wifi, I always turn around in circles for a long time, which is slower than the mobile phone I bought in 2015.

Me too, I don't know how to solve it, a staff member added to me, said let me record the screen, it hasn't been solved, I see that many people have this problem.

Open the browser directly with your mobile phone to access the IP address of the wall-piercing: you can complete the setting (** is written on the product). Then, modify the custom Posture Sensitive Wifi name and password and save it.

Step 5: Connect to WiFi. Search for the set wifi and enter the password to surf the Internet normally. Set up the glory wifi wall treasure, and then set it up again without respectful use in the future. Automatically connect to wifi every time you log in, and switch automatically. Take it.

Router wifi signal instability problem:

It may be interfered with by other people's wireless routers, so manually specify the working channel of the router's wifi to avoid others.

If the mobile phone or computer that is connected to the Internet is turned on Bluetooth and wifi at the same time, the wifi is interfered with by Bluetooth, and it will be very stuck or even unusable.

Multiple wireless devices can interfere with each other if they are arranged in a spatial arrangement that approximates a straight line.