Oxcoooooof pressed f8 doesn t respond? 5

Hello, it is recommended to use a USB flash drive.

Repair the system, if it does not solve the problem, then consider reinstalling the system.

1) Press F8 immediately after booting to the advanced option appears in the let go, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode.

Restore the system or reinstall the system (if the reinstallation is also a blue screen.)

Or crash, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

In there is a hardware cause, deduct the motherboard battery.

Put it down, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

Regarding the above computer problems, it is recommended to go to the computer repair shop, try to reinstall the system to see if there is a problem with the system, if the problem is still not solved after reinstalling the system, then this situation, it may be a hardware failure of the motherboard circuit.

It may be caused by hard disk mode, reboot into BIOS (depending on the computer model brand, generally press F1 or F2; For non-branded machines, press Delete). Feed the hard disk mode to ahci, F10 save and exit, and see if it starts normally; If it still can't be started, it may be that the boot boot of the system is damaged, press F12 and select U disk to start (citation.

The computer turns on oxcoooooof. Press and hold F8 to display English and then how to operate.

Reinstalling the system will do.

Save the important files in the C drive before reinstalling the system, restart the computer, start the computer and press the "Delete" key to enter the interface below;

2.Move the up, down, left, and right cursor keys on the left side of the keyboard to select the indication shown in the figure below;

3.After selecting a good effect, press enter to enter;

4.Press enter in the circle place, select the one shown in the figure below, then press the cursor to select cdrom, press enter to confirm;

5.Then press F10 to save;

6.The computer will reboot and display the above interface, and put the XP disc into the optical drive;

7.After the following interface appears, press enter to continue the operation;

<>8.The following is to choose the reload system to install on that drive letter, just enter directly;

9.This is to format C drive with FAT file system C and quickly format C drive;

Step 11: Press the F key to format the hard drive, then press Enter to continue.

Step 12 <>: Reinstall the system to officially enter the operation of formatting the C drive, and copy the system files directly to the C drive after the format is successful.

Memory read and write problems, generally speaking, are system file corruption, just reinstall the system.

Extreme cases are when there is a problem with the memory particles in the hardware, or the hard disk has bad sectors.