My system is XP, and every time I enter the boot screen, the roller bar rolls N times before I can g

First, open "System Properties" (right-click - Properties on my computer, or open "System" in the control panel, shortcut win+pause break) click the "Advanced" tab, open "Settings" in the "Startup and Failback" area, remove the two in the "System Startup" area, and keep the "Time to display operating system list" if it is a multi-system user. Click "" to make sure that the additional property of the startup item is fastdetect instead of nodetect, and do not add the noguiboot attribute first, because guiboot will be used later.

The next step is very important, open the "Hardware" tab in the "System Properties", open the "Device Manager", "IDE ATA ATAPI Controller", double-click to open the "Secondary IDE Channel" properties, click the "Advanced Settings" tab, change the delivery mode of devices 1 and 2 to DMA if available, select "None" if the device type can be selected, click OK to complete the setting, and set the "Primary IDE Channel" in the same way.

Open the registry (Start-Run-Regedit), click "My Computer" to open "Find" in the "" menu, enter AutoEndTasks, and click "Find Next". Double-click to open the found result, and modify the "Numerical Data" to 1. Then under AutoEndTasks you can find hungapptimeout, waittokillapptimeout, set the "numerical data" to 2000 or less, here by the way, also modify the time of the menu delay, find the menushowdelay below autoendtasks, the value is in milliseconds, if you want to remove the menu delay, set it to 0.

Now that the acceleration of startup and shutdown has been completed, restart the computer to feel the feeling of fast startup, and the scroll bar is OK after only one or two turns.

After enjoying the fun of the fast reboot, we will further speed up the startup, open the "System Properties" - "Advanced" - "Startup and Failback" settings, open the "System Startup" area, and add noguiboot after fastdetect, so that the scroll bar will no longer be displayed at startup. If you really like the scroll bar display, you don't need to do this step.

How long will it take? It's not good if it's too long, so it's recommended to check and delete useless startup items and kill rogue software.

There are too many programs for you to boot, use Super Rabbit Magic to set up a personal system - open the program, and then set it up yourself, Chinese is very easy, or find an optimization software to optimize it.

Haha, it's the same as my family! The best solution is to put the optical drive into the system and cancel it. If it's still slow, it's a problem with the system, so let's redo it.

Because you have a lot of programs on your computer. The more the slower, that's it!

There is too much waste in the system, and it is recommended to reinstall.

2。If you can't enter the system after restarting the computer, you can forcibly shut down and restart it again.3. If you still can't get in, it means that the system files are missing!

Or there is a serious error in the system memory, 4. Try to boot the computer, after the computer brand is out, press F8, press Enter, Enter, enter the safe mode, and start advanced.

option, the last time it is correctly configured, press it to try!

5。No more, enter the safe mode, start normally, press enter, and after you get to the desktop, you can kill the virus completely!

6。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.!

7。If you still can't turn it on, you need to "one-click restore" or "reinstall the system"!

It is very likely that the computer is restarted repeatedly because of the computer's settings, and there is no way to determine what the problem is

The recommended workaround is as follows:

1. Keep holding down F8 when you turn on the computer, after seeing the menu, you can use the upper and lower keys of the keyboard to adjust and select the option of "Last Correct Configuration", and then press Enter to enter the system.

2. If the above method cannot be used for the system, please put in the system disc first, then enter the BIOS to set the disc as the preferred boot item, press F10 to save, and click Yes to confirm.

3. After booting from the system CD, select Repair Installation when installing the system.

4. If the repair installation is not able to boot the system. Then try reinstalling the system.

5. If reinstalling the system is also invalid, consider the hardware problem, check with the replacement method: power supply, memory, motherboard, etc., and replace the hardware after confirming the hardware problem.

Possibly:

1.System file corruption.

2.Hardware: Unstable mains voltage: Poor quality of socket or power outlet, poor contact: Insufficient power or performance of the computer power supply.

Poor: The mains plug of the main engine is loose, the contact is poor, and it is not plugged in tightly

3.Memory issues.

4.Other reasons.

1 Poor heat dissipation or temperature measurement failure.

The fan speed measurement is out of order.

Strong magnetic interference.

Check a small amount of your memory.

It's possible that the system files were damaged by an abnormal shutdown of the repentance.,Reinstall it should be able to repair it in loose training.,Also check whether your memory is plugged in before rushing.。 It's best to take it out and take it out.