My computer was blurry after turning on in the morning, and it was clear after 10 minutes, why?

Quite simply, you are not working properly with the monitor.

If it's LCD, it might be a problem with the graphics card.

If it is the original one, the inside of the CRT needs to be warmed up.

There may be several reasons why the computer screen will be blurry for a while and then it will be fine:

1.Graphics card issues: Graphics card driver failures, graphics card hardware failures, or overheating can all cause the screen to blur. Check that the graphics driver is up to date, and update the graphics driver if necessary. Make sure that the graphics card is well cooled to avoid overheating and degrading performance.

2.Resolution issues: Incorrect display resolution can cause the screen to blur. Try adjusting the monitor resolution to the appropriate settings. Right-click in an empty space on the desktop, select Display Settings, and adjust the resolution in the Display Settings window.

3.Display issues: Failure or burn-in of the display itself can also cause the screen to blur. Try connecting your PC to a different display to troubleshoot issues with the display itself. If the other monitors are fine, then the problem may be with the monitor.

4.Problems with the display cable: Poor or damaged contact with the display cable can also cause the screen to blur. Check to show if the cable is damaged or frayed, and replace the cable if necessary.

5.System setup issues: Incorrect or conflicting system settings can cause the screen to blur. Try adjusting your display settings, graphics card settings, or system settings to fix the problem.

6.Virus or malware: Viruses or malware may cause system performance to slow down, blurring the screen. Run antivirus software, scan the system and get rid of viruses.

7.Graphics card overheating protection: When the graphics card overheats, the graphics card may enter an overheating protection state, resulting in a blurry screen. Make sure that the graphics card is well cooled to avoid overheating and degrading performance.

To resolve this issue, you need to investigate the above possible causes one by one. If needed, seek professional technical support to ensure that the issue is properly diagnosed and resolved.

The computer screen will be blurry for a while, and it may be caused by the following reasons:

Display failure: The components inside the display may malfunction, resulting in an unstable display. In this case, it is recommended to contact the monitor after-sales service or professional maintenance personnel for inspection and repair.

Graphics card failure: The graphics card is responsible for processing the image signal, and if the graphics card fails, it may cause the display to be abnormal. You can try updating your graphics card drivers, or check if your graphics card is overheating, loose, etc.

If the problem still cannot be solved, it is recommended to contact computer after-sales service or professional maintenance personnel for inspection and repair.

Poor data cable contact: Poor data cable contact between the monitor and the computer may lead to unstable display effect. You can try unplugging and replugging the cable to make sure the connection is secure. If the problem persists, consider replacing it with a new cable.

Improper resolution setting: Your computer's resolution settings are inappropriate, which may result in a blurry display. Try adjusting your computer's resolution settings to choose the resolution that best matches your display.

Software issues: Some software may cause abnormal display effects. You can try closing or uninstalling software that might be causing the problem and see if that fixes the problem.

1.If the computer screen cable is loose or in poor contact, check whether the cable is plugged in tightly.

2.The monitor's resolution is set incorrectly, try adjusting the resolution.

3.The refresh rate of the monitor is not set correctly, try adjusting the refresh rate.

If none of the above methods solve the problem, it is recommended to contact a professional computer repairer for repair.

There may be several reasons why the computer screen will be blurry for a while and then it will be fine:

Resolution setting issues: Check that your computer's resolution settings are correct. If the resolution settings don't match the actual resolution of the screen, it can cause blurry or distorted images.

Graphics driver issues: Make sure your graphics drivers are up to date and updated as recommended by the manufacturer. Older versions of the graphics driver may cause image quality issues.

Cable connection issues: Check if the cable connecting the computer to the monitor is loose or damaged. A loose or damaged connection cable may cause an unstable signal, which can cause the screen to blur or flicker.

Monitor malfunction: If none of the above steps resolve the issue, there may be a fault with the monitor itself. Try connecting a different display or connecting your PC to a different device to determine if the issue is related to the display.

Software or settings issues: Some apps or settings may affect the clarity of the screen. Try closing or adjusting the app, settings, or effects to see if there is an impact on screen quality.

It could be due to the following reasons:

The computer screen cable is loose or damaged. Check that the cable is plugged in tightly and if it is damaged.

The monitor's resolution is set incorrectly. Try adjusting the resolution settings and see if you improve.

The refresh rate of the monitor is set incorrectly. Try adjusting the refresh rate settings and see if you see if you improve.

Cleaning issues with the monitor. Clean the monitor screen and see if there is any improvement.

Graphics card driver issues. Try updating your graphics card drivers and see if there is any improvement.

If none of the above methods can solve the problem, it is recommended to contact a professional maintenance personnel for maintenance.

The sudden blurry curvy of the computer screen is caused by the resolution setting, and the solution is:

1. Right-click on the computer desktop, and pop up the option to click on the screen to bury the screen to raise the screen resolution.

2. Next, you need to click on the option to distinguish the rate of boring friends.

3. Next, adjust the resolution in the pop-up interface.

4. Next, you need to open the Device Manager.

5. Next, you need to select the left option display adapter, as shown in the figure below.

6. Open the graphics card properties interface and click Driver.

7. Finally, select Update Driver, as shown in the figure below.

It is estimated that there is too much dust inside your computer case, or the inside of your computer case is damp, it is recommended that you dust and dry it, you can also take a look at the following (1), this must be a problem with the monitor.

Long-term use of the computer should often degauss the computer;

Change the resolution of the monitor, 1024*768 800*600 Switch it to change the screen refresh rate of the computer monitor Flat brush to 85, LCD 75 (2) Place the host and speaker away from the monitor, because they all have a magnetic field, which will have an impact on the display.

1.Mouse click on the desktop, right-click, and click on Properties Options.

2.In the properties dialog box that opens, select the Settings tab.

3.In the Settings tab, select the appropriate screen resolution and click OK.

Setup may also require programming, which is a bit more cumbersome.

See if it's a bad contact, if it's a voltage problem?

That is, there is a problem with your monitor, and you will find after-sales service to solve it.

There is something wrong with the screen.

Special maintenance.