Excuse me, can I use the ordinary liquid crystal special cleaner sold on the market?

It is true that there are special display liniments, but the domestic market is very small, and half of them are imports. I don't know if there are similar domestic products, take the liniment I use myself, monster screenclean, for example, it is sold in North America, but I haven't noticed that it is sold in China, and it is estimated that it should be very expensive to sell.

LS said that it should be possible to use water, but to be precise, I think it should be with Runpa, the kind of particularly soft cloth can have a good effect, the key is that your cloth must be good, the skill is close to the screen, and it will not rub excessively, so that even water Runpa can solve the problem.

Monster ScreenClean's own handkerchief, for example, is a one-foot-square cloth that looks like a washcloth, but is softer than a washcloth.

There are good and bad detergents, if you take care of your computer and cherish your health, I recommend that you do not use chemical and petrochemical cleaners, use Yilong bio-based cleaners. Protect the safety of computer screens, protect human health, and live in harmony with nature.

The LCD screen is generally required to be wiped with a neutral reagent, not all of which are neutral reagents on the market, and some can be diluted by themselves, but the dust on the general surface is wiped with a cotton soft cloth, and if there are handprints or stains, wipe it with a soft cloth dipped in water. You don't have to buy a special detergent.

The main components of LCD screen cleaner are: moderately volatile hydrocarbon solvent, detergent, anti-settling agent, surface cleaning agent, and antistatic agent.

1. It is forbidden to "spray clouds and spitting fog" on the display. Some of the costs in cigarettes can damage the coating on the surface of the panel, and the smoke from the cigarette will adhere to the housing of the display, and over time it will become yellow and unsightly.

2. It is absolutely forbidden to plug and unplug data cables with electricity. This is the first sentence of many manuals, but unfortunately there are still people who don't care about it, especially in the case of a monitor test. Plugging and unplugging data cables with power can easily burn the motherboard of the monitor, and there is no warranty on this.

3. Reasonably arrange the time when the monitor enters the screensaver. Simple screen protection still has some effect on CRT monitors, but it means little to LCD monitors, the correct way is to set the time to automatically turn off the monitor, set it to 30 minutes, you can customize it according to your needs.

4. It's best to bring a dust jacket to the monitor.

First of all, the cleaning material we need is a special cleaner for the LCD screen (a certain treasure and a certain east), and others are not recommended, such as: dipping water to clean or cleaning the display with alcohol, which will damage the LCD screen, especially the kind of plasma display.

Shake the detergent before use, so that the composition of the detergent is uniform, it is best to try spraying it first, check whether the spout spray is even, if it is not uniform, it is not recommended to spray directly on the display, you can spray it on the special soft cloth and wait for a few seconds, so that the detergent penetrates evenly on the soft cloth.

Next, fold the soft cloth into small squares, first use one side to scrub the screen, the strength should be gentle, not too heavy, wipe in order from left to right, and then adjust the soft cloth, and then wipe the screen with the clean side, do not still wipe the original wipe, so that the screen is wiped in turn.

Next, we just wipe the corners of the screen, or wipe the corners of the screen with a clean soft cloth, and scrub them once in order from top to bottom, so as not to stain the screen that has been wiped clean again.

Then, we use the soft brush inside the material to brush the corners of the screen again, so that it is a cleaner screen.

The last step is to wipe the dust from the 5th step, the soft brush, so that it falls on the screen, and then wipe it with another clean soft cloth, so that after a few procedures, your screen can be said to be quite clean.

Note: The LCD screen is a wet cleaning method, it is not recommended to use the dry and wet cleaning method first, that is just a war with the dust, as soon as you clean it, the dust floats away, and it will fall back to the screen again after a while.

You can use the "Jielide" LCD screen cleaning kit, which is very easy to use.

How to clean the screen of your Samsung phone:

1.Wipe with a soft cotton cloth or eye cloth.

2.When wiping, please wipe in one direction, do not use too much force, and it is not recommended to wipe in one area constantly.

3.If the stain on your phone is not easy to erase, use a slightly damp cotton cloth to wipe it, taking care not to get too much water.

LCD screen cleaner set.

1. Geke Marine Biological Cleaner.

This product adopts the latest high-tech biological extraction technology in the United States, and directly extracts the essence with strong cleaning effect from the original marine biological raw materials, which has the advantages of environmental protection, sterilization, and does not hurt the screen, and is the best choice to replace chemical cleaners.

Second, the perfect wiping function of high-performance magic cloth is as follows:

1. High-efficiency fiber vacuum cleaning rolls.

The vacuum collection roll on the surface of the magic cloth increases the contact area of the object when wiping, which can quickly and efficiently absorb dust and avoid damage to the liquid crystal surface.

2. Quickly remove oil stains.

It is made of lipophilic fibers, which quickly adsorbs when it comes into contact with oily substances, reducing repeated friction on the liquid crystal surface.

3. Unique flat fiber.

The unique flat fibre is highly effective at absorbing fingerprints, grease and dust, and the ordinary round fibre often flattens the grease rather than rolling it up, making it difficult to remove it, and it can be seen that there are many patterns left in the light, and there may be lint.

3. Anti-static computer brush:

The included brush is an anti-static computer brush, which is convenient for cleaning the screen, keyboard and other hygienic corners.

Marine Biocleaner Set Instructions for Use:

Use an anti-static computer brush to remove the dust on the surface first, and then wipe it with a magic cloth to achieve the initial cleaning effect.

In case of stubborn stains, spray this product directly on the surface of the wiped product (or magic cloth), and then gently wipe it, and the surface will be as bright as new. Scope of application: laptops, LCD screens, plasma TVs, digital products, computers, TVs, mobile phones, etc.

LCD cleaner is a special cleaning agent product for LCD screen cleaning, which has gradually been popularized with the popularization of liquid crystal.

1. Look at the color.

Professional liquid crystal cleaner products should be colorless, this is because the color of rubber added to non-professional liquid crystal cleaners will cause the anions and cations in the liquid crystal cleaner to exceed the standard, and long-term use will cause damage to the liquid crystal of the trace. The real professional liquid crystal cleaner has strict control over the anion and cation content, and the mother liquor used is also highly purified pure water. The resistance value of pure water used reaches 18 m ohms, which turns the water into an absolute insulator.

General water is conductive, because the water contains various impurities and anions and cations, and the pure water after the high purification reaches 18m ohms, because the impurities are thoroughly filtered, the water will become an absolute insulator, which is required due to the sensitivity of liquid crystal materials to anions and cations. The general so-called professional liquid crystal cleaner manufacturers do not understand liquid crystal, and only manufacture products from the perspective of chemical industry, and even more because they do not understand the characteristics of liquid crystal, they think that adding color will be more beautiful. In fact, from a professional point of view, colorless is the right product.

2. Smell the smell.

Professional liquid crystal cleaner products should not have any smell. This is because the taste of general chemical materials is generally Cl or F or benzene and light base substances, and these things will be extremely harmful to liquid crystal materials. Only companies that don't know about liquids use these substances in liquid crystal cleaner products.

The real liquid crystal cleaner products should use substances that are completely non-damaging to the liquid crystal, and it is almost impossible to understand which substances will damage the liquid crystal, without considerable familiarity and experience in the liquid crystal industry.

The liquid crystal cleaner should meet the following conditions: it does not contain any substances that may damage the LCD screen, it is colorless and odorless, the appearance has no color, the chemical properties are relatively stable, it is not volatile, and it is soluble in water. There is a limit to the ionic content of a solvent.

The use method is scientific, and the product shall not be sprayed directly on the screen. The product should pass the LCD production line test and have the qualification to be used in the LCD production line. The most important thing is that there is no corrosive effect on electronic products, because this product is used in IT products, and you must not use a cloth and paper towel to wipe the LCD screen, because as long as there are a little small particles, it may damage the protective film of the liquid crystal, so remind everyone that this drawing process refers to the shell, not LCD.

That's why there are professional cleaning utensils.

The cleaning agent is generally equipped with a professional wiping material, which is generally made of silk, so that the damage to the LCD screen will be minimized.

Discuss the selection of LCD alternative cleaning agents and their process routes; The semi-aqueous cleaning agent is suitable for high-grade LCD with high requirements for the cleanliness of slit liquid crystal and glass surface, the solvent cleaning agent can use the original F113 equipment to clean LCD with high efficiency and low cost, and the water-based cleaning agent is suitable for ITO glass cleaning and low-grade LCD cleaning.