Can you do a fully poured spiral staircase on a 25 square square full cast floor slab indoors?

Yes, can you make an aldehyde spiral staircase on a 25 square full-cast floor slab? Of course, you can, and you can design it according to your own design, so that you can design a very beautiful spiral staircase, which can make him more practical.

There are 25 square meters of pepper floor slabs in the city, and if you want to make a fully poured spiral staircase, of course, it is possible, but it is more cramped.

I think there are 25 square meters of Quanjiao Lou in the room, and it should be able to do Quanjiao spiral staircase at night, but the rotating thing is slightly smaller.

Is there a 25 square Quanjiao boss who can sit on the Quanjiao spiral staircase? In fact, 25 square meters is too small, so this place can't do a spiral staircase, you can do some small elevators that go up and down directly.

There are 25 square meters of floor slabs in the city, so I think it is possible to make this kind of staircase, as long as you can do it yourself.

If you are doing stairs at night, you can't do it, you have to have a support underneath to withstand it.

Can you make a full pepper spiral staircase on the indoor 25 square fully poured floor slab? This should be a lot of work.

The interior is 25 square meters.

Boss Jiao, is it still difficult to make a spiral staircase for all peppers?

That's to be customized according to your design.

Is it difficult to help you design a set of solutions?

Is it possible to make a staircase with a 25-square-meter poured floor slab in the room? You can't do it along the stairs, you can't do spiral stairs.

The indoor area is only 25 square meters, if this is a fully poured floor slab, this is not suitable, because the area is too large, or it is better to make a small wooden staircase.

You can do a fully deliverable spiral staircase on top of the 25 square meters of full-delivery floor slab indoors, and its strength can reach this standard.

There are 25 square meters of fully poured floor slabs in the room, and the spiral staircase can not be completely burned.

There are 25 square meters of fully poured floor slabs in the room, which should be able to make a full use of the spiral staircase, and this should also be able to make full use of the space.

Summary. Spiral staircase installation process.

1. Recheck the height of the stairs first to avoid mistakes.

False, it is best to look at the height of the drawing to check whether it matches.

2. When determining the position of the column installation in the spiral staircase, it needs to be accurate in advance.

Prepare the connection position of the hanging, measure the distance from the center column to the wall on both sides, and then be gentle with the data of the drawing.

3. Place the spiral staircase tray of the parts on the ground, and be sure to root it.

According to the dimensions of the drawing, the staircase keel will be connected with the drawing, a section.

Press the sleeve one by one, and finally fix the top wire.

4. Please refer to the drawings for the set of spiral staircase trays.

Seeking, from above into the middle column pipe, its last section to the wall.

The trays of the bodies are fixed to each other and cannot be loose.

5. There is a basic standard for the size of the spiral staircase.

The highest level, which can be stepped to the height of the ceiling, should be higher.

meters, the length of the treads of the stairs should be less than 1200 mm. of railings.

The distance between them is within centimeters; The height of the armrests should be between 85-90 cm; The height and depth of the stairs are between 15 and 18 cm.

Can a cast-in-place spiral staircase be hung to a floor slab?

Spiral staircase installation process 1, first recheck the height of the staircase to avoid mistakes, it is best to look at the high wax level of the drawing to check whether it is consistent. 2. When determining the position of the installation of the column in the spiral staircase, it is necessary to prepare the connection position of the hanging in advance, measure the distance between the column and the wall on both sides, and then be gentle with the data of the drawing. 3. Place the spiral staircase tray of the parts on the ground, and be sure to set the staircase keel connected with the drawings section by section according to the size of the drawing, and finally fix the top wire.

4. Please refer to the requirements on the drawings to set the spiral staircase tray, and put it into the middle column pipe from above, and its last section should be fixed with the tray of the wall, so that it can not be loose. 5. There is a basic standard for the size of the spiral staircase, the highest level of the staircase, which can be stepped to the height of the ceiling leather board, should be higher than meters, and the length of the staircase should be less than 1200 mm. The distance between the railings is within centimeters; The height of the armrests should be between 85-90 cm; The height and depth of the stairs are between 15 and 18 cm.