I want to know the password for the WiFi or reset the password 5

To query the wifi password, you can log in to the router to query, and the operation steps are as follows:

1. Open a browser and enter the router address in the browser address bar (generally or, enter the username and password to log in to the router;

2. After logging in to the router, find the wireless network settings, and you can view the wireless network password.

If you don't know the username and password of the router, you can reset the router

1. When the router is powered on, press the [reset button] on the back of the router (usually behind the router, it is a small protruding button or a small circular hole)] for 10 seconds, and the light will be fully on and then off, and then the factory settings will be restored;

2. Log in to the router by pressing the router IP address, user name and password on the back of the router or the manual, re-dial the Internet (you need to use the password given by the network operator), and set the wireless network SSID number (wireless wifi name) and password;

3. After the setting is completed, restart the router and you can use the newly set wireless wifi to log in to the Internet.

The computer is connected to the router with a network cable, open the browser and enter the router, and you can see the password in the wireless security, and the password can be changed there.

As follows:

Tools: Desktop computers.

System: win 1903.

Method steps.

First of all, we run the command through the computer to check the default gateway of the current router, why check it first, mainly to find this address to obtain the login address of the router, not every router is the same address. The following figure shows the steps to view the view.

Open and run through win+r, enter cmd to enter the administrator interface, and enter the command ipconfig to view.

Please click Enter a description.

Please click Enter a description.

Then open the browser and enter the address in the address bar to log in, as shown in the figure below.

Please click Enter a description.

Enter the router login password to enter the settings homepage, and you can view the password of the current wifi by selecting Wireless Settings - Wireless Security Settings in turn, as shown in the figure below.

Please click Enter a description.

By resetting the existing password, as shown in the figure below.

Please click Enter a description.

When the settings are complete, drag it up and down to find the save button and click it, as shown in the image below.

Please click Enter a description.

Answer: Step 1: Set a password for the router, first log in to the wireless router, the login address of the general wireless router is entered in the browser**input box: enter, and then enter the login account and password to enter.

The login address, as well as the login account and password, can be seen in the wireless router instruction manual or the wireless router shell label.

First, log in to your wireless router.

Step 2: The wireless network settings are mainly to protect the wireless network resources from being obtained by others, so you need to set a password to verify the login to ensure security.

First of all, find [Wireless Settings] - [Basic Settings] in the wireless router settings interface, and fill in the name of the router in the [SSID], which is mainly used to identify your own network.

First, find [Wireless Settings] on the wireless router settings interface

Then click "Security Settings" to enter the Security Settings Wizard and fill in the information.

Click "Security Settings" to enter the Security Settings Wizard.

First, select "Security Options" as "WPA2", and then enter the wireless password to log in to the network in the password, the password must be remembered, because the laptop or tablet needs a wireless password to log in and use.

Why is "WPA2" selected for "Security Settings Options" here?Mainly for security reasons, WPA2 wireless network encryption is currently the most difficult to crack, and some other password types are relatively easy to be brute-force cracked by others using network cards.

After setting up the above steps, remember to click the "Save" button at the bottom of the settings interface to complete the operation.

Click the "Save" button at the bottom of the settings interface.

After that, you can take out your tablet or laptop to search for wireless networks near the wireless router, you can generally search for it, and if you find a point to connect to the wireless network, you will be prompted to need a password, and you can fill in the WP2 key password set above to connect to the wireless network smoothly.

There are so many steps for wireless router wireless settings,The next time you need to connect to the wireless network, you need to enter the password to connect,Others can't connect because they don't know the password.,It's easy to prevent others from rubbing the network,Affect your Internet speed。

What to do if you forget your wifi password, teach you a trick to easily retrieve it.

How to change the wifi password at home.

Here's how to reset your wifi password:

How to set up: 1. Login management interface:

Open the browser, clear the address bar, enter part of the router as and enter the management password in the pop-up prompt box. The management password is set by the user, if you forget the password, please restore the router to factory settings and set it again.

2. Set a wireless password

After entering the management interface, modify the wireless password on the right side of the interface, click Save, and the new wireless password will take effect immediately. Note: The password length is 8 63 digits, and a combination of numbers or letters is recommended.

For some older versions of routers, set or modify the PKS password on the wireless security settings > wireless settings page, and click Save after the settings are complete. Some routers need to be restarted for the settings to take effect, please follow the prompts on the page.

If you only change the password but do not change the wireless name, the terminal that has been connected to the signal before needs to delete the wireless configuration file before it can connect to the signal properly.

Change the router management password:

The management password is the password that you need to enter when you log in to the router management interface.

The wireless password is the password that needs to be entered when a wireless terminal (mobile phone, laptop) connects to a wireless signal. By default, the wireless router does not have a wireless password for the wireless signal.

Modification method: Log in to the router interface, click Route Settings > change the administrator password, enter the original login password, set a new management password, and click Save.

For some models of routers, modify the Modify Login Password interface in System Tools >, and click Save after the settings are completed according to the prompts on the page.

Change the Internet broadband password:

The broadband password is the password for broadband dial-up Internet access, which is provided by broadband operators (China Telecom, China Unicom, etc.), and you can only enter your broadband password in the router.

Setup method: Log in to the router interface, click Routing Settings > Internet Settings, select Broadband Dial-up Internet Access as the Internet access mode, enter broadband and broadband password, click Connect, and wait for the IP address to be obtained successfully.

Specific steps to change the password of the wireless router:

If you want to change the background management password of the wireless router, it is recommended to connect it to the computer with a network cable. After the computer is successfully connected, check the obtained default gateway IP.

Open your browser, enter the IP of this default gateway in the address bar and press enter, open the router login window, open the router login window and enter the password.

Enter the correct username and password to enter the background management interface and log in to the interface.

Click the Tools tab and enter the old and new passwords in Manager.

After clicking the "Execute" button below, the router will ask you to re-enter the username and password, which is the changed password, and re-enter the new password.

After re-entering the router background management interface, we directly click the "Wireless Network" button on the left side under the "Home" tab to enter the wireless network in the home page.

Enter the password you want to change in the "Share Password" field below, and it is recommended to change the SSID at the same time, and enter the password you want to change.

1. Go to Settings - WLAN - Click on the connected WiFi - IP - view IP address;

2. Check the router manual or the administrator address at the bottom of the router, open the browser, enter the address in the address bar, enter the router management login page, and enter the administrator account and password;

3. Find the WiFi network name and password, and enter the new password to complete the modification.

Note: Different routers have different modification methods, please check the router's manual or consult the router's customer service staff for details.

3. Find the network name and password, and enter the new password to complete the modification.

Note: Different routers have different modification methods, please consult the router's customer service staff for details. Some WiFi networks do not support changing the password directly on the mobile phone.

Here's how to reset your Wi-Fi password:

1. If you remember the account and password of the router, you can change the password by entering the router management background. Open the browser, enter the router IP, and then fill in the account and password to enter the router management background. Select "Wireless Security Settings" and change the password according to the original Wi-Fi type, or change the Wi-Fi type and enter the new password to save.

2. If you don't remember the router account or password, then you can only factory reset the router and then configure the router password. Restoring the router factory settings requires the device to be running, tap the reset button on the router with a sharp object for ten seconds, and then release it to return to factory mode, and then reboot.

Here's how to reset your Wi-Fi password:

1. If you remember the account and password of the router, you can change the password by entering the router management background. Open the browser, enter the router IP, and then fill in the account and password to enter the router management background. Select "Wireless Security Settings" and change the password according to the original Wi-Fi type, or change the Wi-Fi type and enter the new password to save.

2. If you don't remember the router account or password, then you can only factory reset the router and then configure the router password. Restoring the router factory settings requires the device to be running, tap the reset button on the router with a sharp object for ten seconds, and then release it to return to factory mode, and then reboot.

The steps to reset the wifi password are as follows:Operating environment: Lenovo Legion Y7000, Windows 10 system, TLWDR7660 Gigabit router, etc.

1. Enter the router management address on the computer browser, and then open the login interface.

2. Enter the password you set during the first installation and click "OK".

3. Click on the "Route Settings" option in the lower right corner.

4. Click "Wireless Settings" of the rubber calendar in the "Routing Beam Search Settings".

5. Enter the new wireless password according to the requirements, and then you can reset the wifi password.

First of all, you need to log in to your router.

01. Setup steps.

1. After connecting to the Internet, open your desktop browser and enter the address.

2. No matter what brand of router you are, you can log in, if not, look at the brand-name IP address under your router.

3. Then you can click on the "System Management" function in the menu on the left.

4. At this time, you can see the "new password" function appear above, and then you can set it.

5. Enter the correct password twice and click OK to succeed.

02. Frequently asked questions.

1) If you enter the login address (management address) in the browser of your computer, you will not be able to enter the router's management page.

Most of the time, this problem is caused by a problem with your operation, and in rare cases, it is a problem with the router. You can click on this article below to see how to solve the problem.

2) I opened the login page of the router in the browser, but I forgot the login password (administrator password), and I did not log in to the router's base settings page.

You can try to log in by entering the router's current wifi password first. If that doesn't work, you'll have to factory reset your router and set it up again.