The inside of my Nokia 5310 display is broken, how much does it cost to repair

I'll give you the most reliable one,5310 is the Nokia series**mobile phone,The screen is an inch of Q screen,16 million colors,TFT material,Because the inside of the mobile phone is not as complex as the N series of smartphones,So boot repair is not in the monopoly can be repaired,It will be cheaper。

First of all, if you are licensed in the mainland, then it is recommended to go to the nokia contracted maintenance point to repair, reliable and only charge for materials (within the warranty period), because your situation is considered damaged, otherwise no money will be charged. **200-250 yuan, there is a slight gap between different places according to the situation.

If it is a parallel import, then it is recommended to go to a regular mobile phone repair shop, **180-250.

The most cost-effective way is to go to the ** online to buy a piece of Nokia original screen, and then take it to the repair shop to help you install it, a total of less than 150.

NOKIA-5310XM is now priced at around 1400, and the screen accounts for about 20%**, you can calculate it yourself!

100 yuan, it is recommended that the landlord go to Nokia's official after-sales service to change it, insurance point!

My 6288 took three hundred to repair, and I still found a lot of homes to pick the cheapest one. The other prices are all 500, and it is recommended that the landlord be mentally prepared. LCD screens are expensive.

If you go to the after-sales service of professional Nokia, it will cost at least 150-300 yuan.

Go to Nokia's official after-sales service to see, about 200.

Touch screen failure is also a common fault of 5800, you can try the following methods, if it doesn't work, please go to the after-sales service for repair.

1. Recalibrate the touch screen.

Press the white key in the middle of the screen - Settings - Mobile phone - touch input - touch screen calibration, it is recommended to use a stylus to calibrate according to the prompts;

2. Clean the screen or remove the protective film;

3. Press the screen lock button back and forth a few times, in the middle of the right side of the phone;

4. Turn off the machine and wait for two minutes before turning it on;

5. Turn off the battery, remove the battery for a few minutes, and then install it and turn it on;

6. Remove the ** card and memory card and install them again;

7. If the theme and software are installed too much, change back to the original theme and uninstall part of the software;

8, there is no way to troubleshoot the above, then you have to soft grid, that is, restore to factory settings, you must first back up the content on the phone, you can use the PC suite to back up. If the touchscreen is completely out of order, there is no way to back it up and no soft grid. It is recommended to remove the memory card before soft grid.

Soft grid method: Press the white key in the middle of the bottom of the screen - Settings - Mobile phone - mobile phone management - factory settings - enter the lock code 12345 (if you change the lock code, please enter the lock code you changed), confirm. Or go directly to the dialing interface and enter the command:

- Enter the lock code (same as above).

After the soft grid, the machine will start again by itself, and enter the date and time according to the prompts (except for the first selection, the others can be ignored directly). Then change the language back to Chinese, if the problem is eliminated, reset and install the software.

If you have tried the above methods and failed, please go to the after-sales inspection and repair.

The screen of 5800 is divided into two parts: the display screen and the touch film screen, and one set is about 200 yuan.