No water The water meter turns very quickly and intermittently What is the reason? 50

The water meter itself is abnormal or has a serious leakage.

Since it is determined that there is an abnormal phenomenon in the water meter, it should be reported to the local water supply company for repair in time, and the maintenance personnel should come to the site to check and determine whether the water meter has an abnormal fault or there is indeed an abnormal water leakage.

The existence of this situation is obviously not good for oneself, and it is easy to cause the cost of tap water to rise.

The water meter is the property of the water company, and the water company has a responsibility and obligation to resolve these anomalies.

There is no water, and the water meter turns very fast. Please find a professional to test your water meter, under the guidance of professionals, and then check whether the water meter is normal, whether the water meter is close to your home, and there may be a property in the process of connecting the water meter to the wrong meter.

There are 2 possibilities: 1. There is something wrong with the water pipe that is not closed or leaking, the most common is the toilet and washing door. 2. It may be that the water meter is broken, I have had this situation before, and it would be good to change the meter.

Since you won't use water for a while, then simply close the valve behind the water meter and cut off the water completely, so that the water meter should not turn again, and take this opportunity to check where you have reacted because of your water cut off (do not rule out the possibility of stealing water).

If you don't use water, the water is very fast and intermittent, what is the reason for the water meter is broken? Let's get someone from the water company to fix it.

1: Are you sure it's your water meter.

2: Check with the water company (this happens if you confirm that there is no water).

3: After confirming that the first two problems have not been solved, the water meter will be smashed and replaced with another one.

Explain that someone's tap water is connected to the wrong one Turn off the ball valve in front of your water meter and see.

Well, I've encountered an excess of electricity bills, it's best to find a property to take a look, is someone connected to the wrong water meter?

Either someone steals your water, or it leaks, and then the water meter is broken, call ** to find someone from the water company to check it!

Explain that your water meter is not only you are using, don't check it quickly, who is stealing your water, in this case it is best for two people, to get through the ** check, you turn off your water, and then find someone ready to close at any time, and then you go around to see who is using you to know, call someone to close the door on the spot to see if the faucet is still out of the water.

The reason is that the operation of the water meter requires energy and will never rotate out of thin air, so when this happens, you need to see the water meter slowly rotating, that is, the section of the water pipe from the water meter to the home leaks. Or there is a leak in one of the devices that use water in the home, such as solar energy, toilets, jugs, etc., and relevant inspections need to be carried out.

Close the main valve at home, disconnect the back of the main valve, and see if the main valve is leaking, so as to distinguish whether the water pipe is leaking, or the main valve at home is leaking, and determine which part it is.

Benefits of Water Conservation:

1. It can reduce water consumption and maintain the sustainable use of water resources.

2. Save the operation and maintenance costs of the water supply system, reduce the number of water plant construction, and reduce the investment in water plant construction.

4. Enhance the ability to prevent drought, short-term water-saving measures can bring immediate results, while long-term water-saving can greatly reduce water.

5. Water conservation brings obvious environmental benefits, in addition to improving the carrying capacity of water resources and water environment, there are also benefits in beautifying the environment and maintaining the ecological balance of rivers.

Why does the water meter turn when no one uses water, the water company employee told the truth.

Why is the water meter still going without water? Because someone else is using water, and when someone else is using water, the pressure of the water will change. If the pressure of the water changes, the water meter will go, the water meter will go forward when the water pressure is large, the water pressure will be small, the pressure of the water outlet will be large, he will go back, and the water meter will go forward, so when there is no water, the water meter will also go.

Therefore, when not using water, be sure to put the water meter. The inlet valve in the back is turned off. If you turn off the main valve in the house.

That didn't work either, because he was still some distance from the water meter. So the water meter will still go.

Water meters require energy to operate, and they never rotate in a vacuum! So if you see the meter slowly rotating, it must be a leak in the section of water pipe that goes from the meter to your home.

The water meter got into the air.

When a water meter is newly installed or moved outward, the water in the user's pipe is emptied, and the air is defeit"Take advantage of the situation"；When the water flow is restored, the water flow presses the air in the pipe to the blind ends of the indoor pipe, forming it"Compressed air"until the air pressure equalizes with the water pressure. There is an interface between gas and water, and the pressure difference between the two sides of the interface is zero.

When the water pressure changes, a certain pressure difference is formed between the two sides of the interface, and the balance of air and water is destroyed. To compensate for this pressure difference in order to achieve a new equilibrium, the pressure of the air must be changed accordingly, which causes the volume of air to expand or contract, thus prompting the pipe to this"Communicators"The tap water within produces a flow, thus,"The water meter is idling"The phenomenon arises.

Precautions for the use of water meters.

The installation location of the water meter should be convenient for disassembly and meter reading, and should prevent pollution from exposure and freezing. At the same time, the oil valve should be installed before the installation of the water meter, so that the water can be disassembled and disassembled.

When installing, the hemp wire, ore and other debris of the pipeline should be removed to prevent the water filter from being blocked, otherwise the word value error will increase, and affect the water supply, the liquid in the pipeline is corrosive or high-temperature liquid, which will cause the deformation of the movement, and the use of this water meter should be avoided.

There is air in the tubing. For example, if a water meter has just been replaced, there is a small amount of air in the meter or pipeline, and the air is slowly compressed by the water, which is reflected on the water meter, and the water meter will rotate slowly. (This phenomenon will disappear after a day or two).

There is a drip in the tubing.

There are many reasons why there is no water at home, but the water meter keeps turning.

First, it is in the implementation of the renovation of the household after the meter replacement, due to the installation of the new water meter when the water needs to be stopped, resulting in the pipeline to bring air, and the new water meter is generally sensitive, due to the pipeline is not exhausted of gas, water pressure fluctuations and the influence of "water hammer";

Solution: Use water for the first time to drain the air accumulated in the pipe.

Second, buildings that use water pumps for secondary pressurized water supply will also appear; There are also many water pipe joints at home. Idling sometimes forward and sometimes reversed, so the impact on the degree is limited, if there is a large error, it is not excluded that it is other problems such as pipeline leakage.

You don't have to do it yourself, you can solve it naturally with tap water for a long time.

3. Solutions behind the water meter: Some pipes behind the water meter are not easy to find, such as those embedded in the wall or buried in the ground. In addition, leaks in the storage tank of the flush toilet at home are not easy to detect.

So even if you don't use water, an imperceptible leak will still make the meter turn.

Solution: After turning off the water meter at night, listen to the sound of pipe leakage behind the water meter; Or it drains in the ground of each drainage. Use your phone's flashlight to see if there is running water.

There is no water at home, but the water meter keeps turning, if this is the case, you should replace the water meter, now the water meter is a smart performance, in many cases, if this happens, it may be that there is a blockage at the outlet of the water meter, so replacing the water meter is the best way.

If there is no water at home, but the water meter keeps turning, it means that there is a problem with the water meter, and you can replace it with a new one, so that you can do it.

Check along the water pipes to see if there are any leaks!

If it is piped in the wall and the wall is not wet, then you need to ask a professional to take a look.

If you invite them to come, they don't come, you can tell him that the water meter doesn't count, you let them come, they come in time.

If there is no water at home, but the water meter keeps turning, it means that the water meter is out of order, and you can call someone from the water company to verify it.

In this case, the water meter is broken, and the second is that the water pipe is leaking, so this situation can occur, so hurry up and find the relevant personnel to repair it!

If you don't have water at all, but the meter keeps turning. Then you have to find a skilled worker from the water group to help you take a look. That means that the water meter should be broken and must be repaired in time. Otherwise, who is it a waste of?

Call the water company immediately and ask them to replace the meter. When you hit **, you have to say this, the more I use the record number of my water meter, the less I use, please come and change the water meter. Otherwise, they won't be able to pass the buck.

There is no water at home, but the water meter has been turning, the water meter has failed, and the relevant maintenance personnel should be called immediately, otherwise the water bill may be a lot and will be more disadvantaged.

In this case, you should go to the water supply bureau to report the situation and ask them to fix it. The water meter should be broken.

If you don't have water at home, but if the water meter keeps turning, is it because of the leak? Then, if you can't ask, ask the person who is in charge of the water.

This shouldn't be, as long as the water meter is not broken, it won't be like this, find someone to repair it, otherwise it will always incur costs.

Summary. Maybe it's caused by the low and unstable pressure of your tap water, and your water will flow back when someone else's household uses water, so the meter is reversed, and when there is no water, the water will fill your water pipe, at this time the meter is the main transmission, and the pipe water is full and you don't use water, then the water meter will not turn.

My water meter doesn't turn for a while, what's going on?

Hello, glad to answer for you. Maybe it's caused by the low and unstable pressure of your tap water, and your water will flow back when someone else's household uses water, so the meter is reversed, and when there is no water, the water will fill your water pipe, at this time the meter is the main transmission, and the pipe water is full and you don't use water, then the water meter will not turn.

If you confirm that the water meter is still going and stopping without any water, don't think about it and don't get entangled, call the local water company, question the water meter failure, the measurement is not accurate, and ask for testing or replacement.

The phenomenon that the water meter will slowly rotate and stop for a while may have the following reasons:

There is an internal leak in the pipes or water appliances behind the meter, causing the water flow to constantly push the meter around. The solution is to check and fix the leak.

There is air in the pipes, which causes the water pressure to be unstable, forming a water flow and an air flow that alternately pushes the water meter to turn. The solution is to exhaust the air in the pipe, which can be achieved by closing the valve in front of the meter, opening all the faucets behind the meter, draining the remaining water, and then opening the valve to discharge the water for a period of time.

There is a water hammer phenomenon in the pipeline, that is, due to the sudden closure or opening of the valve burial hall, the water pressure changes sharply, causing the water flow impact and **3. The solution is to find the cause of water hammer and eliminate it.

Pressure fluctuations caused by secondary water supply facilities lead to unstable water flow in the network. The solution is to adjust the setting and control of the secondary water supply facilities.

The above are some possible causes and solutions to bending and concealment, and the specific situation should be judged according to the actual situation of your pipeline and water equipment.

There are several possible reasons why the water meter is unstable:

1.Pipe leakage: When the pipe leaks, the water flow rate will decrease, resulting in a slower or unstable rotation speed of the water meter.

2.Unstable water pressure: Unstable water pressure may also lead to unstable grip speed of the water meter. When the water pressure decreases, the water meter speed decreases. Conversely, when the water pressure increases, the speed of the water meter will increase accordingly.

3.Water meter failure: The parts inside the water meter may have problems such as wear and age, which may also lead to unstable water meter speed.

4.Water quality problems: If there is a problem with water quality, such as a large amount of sediment or impurities in the water, it can also cause the water meter to be unstable.

If your meter speed is unstable, it is recommended that you first check the pipes for leaks to ensure that the water source is unobstructed and undisturbed. If none of the above causes are present, the meter may need to be inspected and repaired. It is best to contact the water department or a professional water meter repairer in the local area for inspection and repair.

It may be that there is a leak in a pipe or toilet, or a leak in the pipe behind the meter that is difficult to detect, such as a pipe embedded in a wall or buried in the ground.

It may be that there may be air trapped in the ducts. When the water pressure rises, the air bag is compressed, and the air bag is stretched when the water pressure decreases, which pushes the water back and forth, causing the water meter to rotate back and forth occasionally.

Please note that if the water chain grip is constantly turning, it may result in a waste of water and may also affect household water use. Therefore, you should contact a professional maintenance personnel in time to check and repair the water pipes to avoid waste of water resources and inconvenience to household water.