Which is better, three dimensional board, space board, solid wood particle board, and solid wood boa

In fact, different plates have their own scope of use and their own advantages and disadvantages;

Three-dimensional platesIt is a new type of three-dimensional decorative board for indoor and outdoor walls. The shape is fashionable and simple, the real three-dimensional effect, the free combination of a single block, the color is casual, and it has a more flexible decorative design and a better decorative art effect.

Three-dimensional plate features:

1: Three-dimensional modeling, to create a comfortable and elegant three-dimensional space.

2: The material is light, easy to install, scrubbing and easy to clean.

3: Free combination, free coloring, highlighting the owner's personality.

4: Healthy and environmentally friendly, formaldehyde-free, odorless, waterproof and flame retardant.

Space PlatesIt refers to a new type of lightweight roofing panel material composed of artificial light stone prepared by high-strength cement foaming process as the core material, and composite of upper and lower cement surface layers and steel edge ribs reinforced by glass fiber mesh (or fiber bundle), which has the characteristics of good stiffness, high strength and good ductility, and has good structural performance and engineering application prospects. Its self-weight is 2 2, and the standard value of all loads on the roof (including live loads) generally does not exceed 2.

Solid wood particle boardIt is a wood-based panel composed of wood or wood poles, logs crushed, fine wood fibers are used on both sides, long wood fibers are sandwiched in the middle, and the adhesive is applied under the action of heat and pressure. As a new, high-grade and environmentally friendly substrate, solid wood particle board has been widely adopted by furniture manufacturers in Europe and the United States, and the domestic high-end panel furniture market has also begun to adopt this kind of board in a large area.

Solid wood particle board features:

1: The decorative performance is relatively strong.

2: The warpage is not easy to deform.

3: Strong nail grip.

4: Good processing performance.

Solid wood boardsIt is a wood plank made of complete wood (logs), which is durable and durable, with natural texture, most of which have the unique aroma of natural wood, have good moisture absorption and air permeability, are beneficial to human health, and do not cause environmental pollution. However, solid wood boards are relatively expensive, and consumers should consider them according to the actual decoration and cost when choosing.

The name is the same as blockboard and MDF, joinery makes its own home structure, and it kills the ecological board now called, MDF for modeling, and try not to use the need to paint.

Solid wood pellet high-pressure board is particleboard, commonly known as particle board. MDF is also known as fiberboard. MDF and particleboard are both commonly used boards nowadays.

MDF is made of wood flour extrusion and bonding, so the structure is dense, the surface is flat, the processing is simple, it is not easy to be deformed by moisture, and the formaldehyde content is low, which is very suitable for making furniture on site. Disadvantages: The nail grip is not strong.

Because its structure is made of wood powder and has no texture, it will lose its tightening power when nails or screws are tightened, especially if the screws are tightened in the same place more than twice. **: According to the difference between imported and domestic veneers and thickness, each ** ranges from 80 yuan to 200 yuan.

Environmental protection testing standard: the formaldehyde emission of each cubic meter of plate should be less than or equal to 30 mg. Particleboard is made by crushing various branches and buds into granules, and then bonding and high pressure, because its profile is similar to honeycomb, so it is called particleboard.

Now most of the international panel furniture are selected this kind of board, the advantage is that the inside is the granular structure of the cross staggered structure, so the nail holding force is good, the transverse bearing capacity is good, and the cost is lower than the MDF, although the formaldehyde content is higher than the MDF, but much lower than the large core board; Relatively cheap (depending on the difference between imported and domestic finishes and thickness, each sheet ranges from 60 to 160 yuan). Disadvantages: due to the easy preparation method, the quality difference is very large, it is not easy to distinguish, the bending and tensile resistance are poor, and the density is loose and loose.

Usage: The surface is also often pressed on both sides with a trimmer ammonia veneer, and the appearance of MDF is the same as that of MDF after edge banding In general, MDF is more environmentally friendly, but the nail grip is not strong, so it is generally used to make wood products, storage rooms, shoe cabinets, door covers, window covers, baseboards, etc. Panel furniture is generally still made of particleboard.

The inner core is spliced with solid wood strips, and the veneer is glued on both sides. Therefore, it is called wood core board, also called sandwich board, and the thickness of the large core board (in millimeters) length and width:

1220*2440 (unit mm). It is the main material for the production of on-site wood products, and the main source of pollution in the decoration, one is paint, and the other comes from woodworking boards. If you want to decorate your home, it is recommended to choose a woodworking board with quality assurance and a good brand.