Where does the water in the toilet go, where does the water that flushes the toilet go

Domestic sewage. It will be discharged into the sewer and discharged after sewage treatment.

Every day, the domestic sewage generated by people, including the dirty water from washing vegetables, dishes, laundry, and face, as well as the sewage from the toilet to wash urine and defecation, will flow into the main sewer through the sewer of each house. After passing through the main sewer pipe in the corridor, it is directly discharged into the main sewer pipe near the house, and the sewer in the toilet goes directly to the residential complex.

A septic tank was built and discharged into the city's main sewer near the house.

Many urban sewer mains are connected together to form an urban sewer network, which leads to the city's sewage treatment plant.

The treated water is then discharged into a river, river, or sea.

Of course, some new residential communities no longer build septic tanks, and directly discharge fecal sewage into urban sewage pipes, and then enter sewage treatment plants for treatment. <>

Flush the toilet with water that goes to the septic tank. The water flushed down the toilet goes through the sewer pipe, is discharged to the septic tank, is re-purified, and reused after qualifying. The principle of the septic tank is that the solidified matter decomposes at the bottom of the tank, and the upper layer hydrates the object, enters the pipe and flows away, preventing the pipeline from being blocked, and giving the solidified object (feces and other garbage) sufficient time to hydrolyze.

Flush the toilet with water that goes to the septic tank. The water flushed down from the toilet bowl is discharged to the septic tank through the sewer combustion pipe, re-purified, and reused after qualification. The principle of the septic tank is that the solidified object decomposes at the bottom of the collapsing tank, and the upper layer hydrates the object, enters the pipeline and flows away, preventing the pipeline from being blocked, and giving the solidified object (feces and other garbage) sufficient time to hydrolyze.

The role of septic tankThe septic tank is a basic sludge treatment facility, and it is also a pretreatment facility for domestic sewage, and its role is manifested in:

1. Ensure the environmental sanitation of the living community and avoid the diffusion of domestic sewage and pollutants in the living environment.

2. In the working environment of anaerobic decay of septic tank, kill mosquitoes, flies and eggs.

3. Temporary storage of sludge, organic sludge for anaerobic decay, and cooked organic sludge can be used as agricultural fertilizer.

4. Pretreatment (primary treatment) of domestic sewage, precipitate impurities, and hydrolyze macromolecular organic matter into small molecule organic matter such as acid and alcohol, so as to improve subsequent sewage treatment.

When there is standing water in the toilet, it may be due to a clogged or leaky pipe underneath. This can not only cause distress in the home environment and daily life, but also have a negative impact on the health of family members.

Here are the steps to deal with stagnant toilet water:

Take precautionsProtective equipment such as gloves, long pants and long-sleeved shirts need to be worn before draining the water. This protects yourself from potential harm.

Using a suction device or pumpAfter turning off the water source, you need to use a suction device or pump to drain the stagnant water from the bottom of the toilet. These tools can be inserted directly under the surface of the water to easily drain stagnant water.

Check and remove blockagesAfter draining, inspect the toilet pipes for any blockages, including paper towels, hair, or chain objects. Pipe cleaners or deodorants can be used to clear blockages.

Repair a water pipe leak If the pump or suction device does not solve the problem, there may be a leak in the water pipe. Before repairing, the leak needs to be found. It can be repaired by sealing, replacing the water pipe oil seal, or installing a new pipe.

Regular cleaning and maintenanceAfter the drainage problem is resolved, the toilet should be cleaned regularly to ensure that the pipes are clear. At the same time, care needs to be taken not to throw debris, hair and other foreign objects into the toilet to avoid causing re-blockage.

If you find water in the kitchen but no water in the bathroom, then I think the most likely factor is that the valve of the tap water is closed

Many people think that the pipe leading to the bathroom is blocked, and even if there is a blockage, it is impossible that there is no water at all, and it can only be said that the flow rate is slow, so it can only be caused by the closure of the valve.

Because some household water mains are in the kitchen, the valve of the pipe leading to the bathroom can be closed by an inadvertent touch. Especially if you have children at home, you should take a closer look at this aspect, because children will always make some unintentional actions. Sometimes the water flow in the bathroom is too low, and it may be a dirty substance condensed in the water pipe.

Because people living in cities nowadays generally find that the quality of tap water is not very good, and tap water can be drunk directly in foreign countries, but not on our side.

Let's not say that there is a smell of bleaching powder in the tap water, but there are too many impurities in the tap water, so there will be something similar to stones in the tap water pipes, which is the dirty substance remains, so the tap water pipes must be replaced every one or two years.

To avoid this, you need to install a filter valve in the main entrance to the tap water valveOf course, we can regularly replace the filter screen in the filtration method, so that the water quality can be improved, and of course, the drinking water used directly for cooking and cooking in the kitchen should also be filtered, so as to improve our water health.

Water in the toilet is a common occurrence, and there are many reasons why this can happen. Here I will explain a few reasons why there is water in the toilet and how to deal with it.

1.The flush fails. The most common cause of water in the toilet is a failed flusher. At this time, you can check whether the connecting rod of the flush is off, if it is, you can reinstall it, if not, you need to replace the flush.

2.Plug tube. If there is not only water in the toilet, but the water flow is very slow, it is possible that the pipe is blocked. You can use a toilet unclog to get the blockage in and out of the way.

3.The water tank is aging. If your toilet has been in use for a long time, then it is possible that the cistern is aging. This situation can be solved by replacing the full set of water tanks.

4.The seal fails. If the toilet seal fails, it can cause water to leak out of the seal. In this case, the seal needs to be replaced.

In summary, there are many reasons why there is water in the toilet, but most of them can be solved by replacing parts or repairing them. If it can't be solved, then it is recommended to ask a professional plumber to repair it.