What to fill the gap between the heat pipe and the aluminum tank?

The gap between the heat pipe and the aluminum trough can be filled with AB glue. AB is mixed and filled well before condensation, and it will coagulate after a while.

It is best to fill with a thermally conductive resin. It is the kind of special grease that is commonly filled between the heat sink and the components. In this way, the thermal conductivity of the heat pipe will not be affected, and the overall effect of actual cooling can be enhanced.

You can fill the gap with glue, and you need to use a glue that can prevent heat, and after putting glue, this filling will be stronger.

Generally speaking, it is recommended to use soldering, and the melted tin is filled between the heat pipe and the aluminum tank, and the thermal conductivity effect is the best.

Soldering should be careful to prevent high-temperature bursting.

When conditions are not available, high-temperature thermally conductive silicone can be considered. The effect is also okay.

Sulfur with glass water. Talcum powder mixing. Just transfer the barracks to fill.

Silicone grease with better thermal conductivity can be used.

You can put some fiberglass between them or fill them with foam.

You can use some gel or something, and some solid glue can still be used.

Manage the gap between the Li Dynasty, what can be used to fill it? The kind of filler to fill the leak, it can be used to fill.

There is a plastic foam filler that can fill the filled heat pipes and. Apprenticeship between the Lu Dynasty.

If you want to ** Dao Fengxi, Tian Cong is still very useful, because in the original process, because he didn't fill in with him, so that day from the process played a very good role, and the bad one will give you a character that has played a certain price between the hotel and other museums.

The gaps between the heat pipes and the aluminum grooves can be filled with some padded foam.

Welding, also known as welding, is a manufacturing process and technology that joins metals or other thermoplastic materials such as plastics by heating, high temperature, or high pressure. Welding achieves the purpose of bonding through the following three ways:

1. Fusion welding - heat the workpiece to be joined to make it partially melted to form a molten pool, the molten pool will be joined after cooling and solidifying, and the melt filler can be added to assist if necessary, it is suitable for the welding of various metals and alloys, without pressure.