How to deal with Broadband 769? How to fix broadband connection 769 error

Error 769 is usually caused by a problem with the user's NIC (NIC), such as the NIC is disabled or the driver is not installed. Suggested Handling: Manner.

1. Click "Network Neighbor Right-click Attributes", find "Local Connection" in the network connection1, if there is no local connection, please use method 2 to guide 2, if there is a local connection, check and see that it should be disabled, please guide the right-click "Local Connection", and then click "Enable (a) method".

2. Click "My Computer Right-click Properties", in the system properties, click "Device Manager (D)" under "Hardware", and find "Network Adapter" in the pop-up device management 1. If not, or the network adapter is empty, it is a software and hardware problem of the user's network card, and it is recommended that the user contact the computer maintenance personnel to deal with it. 2. If there is a yellow exclamation mark under the network adapter, it means that the network card driver is abnormal, it is recommended that the user restart the computer and try again, if not, it is recommended that the user contact the computer maintenance personnel to deal with it by himself 3. If there is a red cross under the network adapter, it means that the network card driver is disabled, and the guide can right-click "Enable (e)". To learn more about service offers, click on the "****" customer service 219 below to answer for you.

Broadband Connection Error 769 Error Cause:

1. The NIC is disabled;

2. The network card is damaged or the driver is lost.

Solution: 1. Right-click "Online Neighbors" - Properties, check whether there is a "local connection", if the "local connection" is gray, click the icon and select "Enable", you can connect to the network normally;

2. Restart the NIC or reinstall the NIC driver;

Restart method: Right-click "My Computer" - select "Properties" - click "Hardware" - enter "Device Manager" - select "Network Adapter".

If you use China Unicom Broadband error message 769, it means that you cannot connect to the specified destination, mainly because the network card is disabled or the driver is disabled.

If it is lost, it is recommended to deal with it in the following ways:

1. Please right-click "Online Neighbors" "Properties" "Local Connection" to check whether the local connection is in the "disabled" state, if so, just double-click the local connection and see the status changes to "Enabled";

2. (If there is no local connection in the attributes) the NIC driver is lost, it is recommended to reinstall the NIC driver;

3. It is recommended to check whether the network card is loose or damaged.

Detailed consultation and processing.

1. Broadband 769 error setting method: please use the right mouse button to click on my computer, then click on properties, click on hardware, and then find the device manager, click, find the network adapter after entering, please use the right mouse button to click on the red cross, and enable the network card.

2. If there is no red cross, it is a yellow exclamation mark, then please reinstall the network card driver. Customer service 95 will answer for you. On-demand broadband, as fast as you want, reply to the keyword "on-demand broadband" can be handled directly, convenient and fast.

Error 769: Unable to connect to the specified target.

Information characteristics: There is no local connection in the online neighborhood, and there is no adapter in the computer hardware device.

Problem: This is when there is a problem with your computer's network equipment.

That is, a problem with the network card. There are three scenarios:

1: The network card is loose or not tightly plugged in (this is mostly the case).

2: Integrated network card, motherboard burned!

3: Independent network card, network card burned!

First of all, check if you have a local connection in your network connection, and if you disable it!

Secondly, you check your network card and network card driver, reinstall the appropriate network card driver, remove the network card and wipe the gold finger, and replace the network card if the network card is damaged.

Check your system again for viruses, antivirus or recreate the installed system, and repeat the previous two steps!

If the username or password is incorrect, just re-enter it.

Error reason: The network card is disabled, method: Please right-click on the computer, select Manage, then select Device Management, Network Adapter, and then look at the network card driver and click the right button to activate the network card.

1. First of all, you need to find the "This Computer" icon in your desktop screen, right-click in its drop-down menu and click the "Manage" button

2. Then you need to select the "Device Manager" option in the next pop-up page box, and click the "Network Adapter" button on the right

3. Finally, you only need to right-click on the network card driver and select the "Update Driver" button to activate this program to solve the 769 problem of broadband connection

Error reason: The NIC is disabled.

Solution: 1. First, right-click the "My Computer" icon and select the "Manage" option.

2. Then select Device Management in the computer management window that opens.

3. Then click to open the network adapter to check the network card driver.

4. If there is an exclamation mark or a red cross on the NIC, you can right-click the NIC and select "Enable" to reconnect to the NIC.

The network connection shows an error**769 mainly because the network card is disabled, we can enable the network card, if the network card is damaged, it will also prompt such a message, we need to follow the steps below to troubleshoot and change.

Method 1: There is a local connection, but it is disabled.

1. First, click on the network in the lower right corner of the computer desktop.

2. Open the network sharing center in the network list.

3. Open Change adapter settings in the tethering center.

4. Find the local connection.

5. Right-click the local connection and select Connection.

6. Wait for the connection to be completed, so that we are done with the setup.

Method 2: What should I do if I don't have a local connection?

1. Find System & Security in the Control Panel.

2. Find management tools in Systems & Security.

3. Find the service in the management tool and open it.

4. In the service, find Network Connection, right-click this item, and select Start. And so we're done.

Error 769 is caused by the network card being disabled or the network card driver being damaged

If you have a router, power off and restart it first, if it still can't be used, please remove the router for the following operation detection;

Re-enable the local connection;

Reinstall the NIC driver;

Replace the NIC hardware.

Error 769 error, most of them are disabled on the network card, just enable it! or caused by some firewall software and computer viruses, which is very common. If you don't find a local connection, it's usually because the driver of the network card is lost or the computer doesn't detect the network card, just reinstall it!

Most of the 769 is caused by the network card being disabled, so you can turn on the network adapter and re-enable it.

If there is no local connection, the NIC driver is faulty or the NIC hardware is faulty and needs to be reinstalled or replaced.

Hello, it may be caused by network failure, you can restart the modem and set-top box, try again, if it still doesn't work, it is recommended that you contact the staff to come to the door for repair.

The "Error 769" message is displayed for broadband Internet access, and it cannot be connected to the specified target, which is caused by the following conditions, and you can troubleshoot according to the corresponding situation:

1. The NIC is disabled. You can right-click on the neighbor, left-click on the properties to open a new window, double-click on the disabled neighbor or right-click on the local connection, left-click to enable, enable the network card, and troubleshoot.

2. The NIC driver is not installed. You can enter the device manager (right-click on my computer, left-click on properties, click hardware, click device manager), see if there is a yellow question mark in the screen, there are other devices written behind, there is a yellow question mark written behind the Ethernet controller under other devices, right-click to update the driver software, and follow the prompts to install the network card driver.

3. The computer does not detect the network card. In Device Manager, if there is no corresponding network card device information under the network adapter, and there is no Ethernet controller under other devices, you need to open the chassis, clean up the network card, replace a slot, and then restart the computer to see if the network card can be detected, if so, install the driver. If it still doesn't work, ask a computer company to check the network card and motherboard.

If the NIC is integrated, you need to go to the BIOS to check whether the device is disabled, and if so, enable it. If not, deactivate and purchase a new NIC if not.

4. The NIC driver is installed incorrectly or conflictingly. In Device Manager, if there is a yellow exclamation mark in front of the network card under the network adapter, uninstall the program and check if there are other redundant network card drivers. Then reinstall the driver correctly.

5. 769 caused by firewall program failure. Rising Firewall 2009 virtualizes a network device, and after the first installation, it will conflict with the network card, causing a 769 error. This situation can usually be solved by restarting the computer.

769 means a problem with the settings of the computer itself, you can see if the network is enabled, whether the settings of the firewall have been changed, etc.

Or look at the IP settings in the properties;

I really can't reply to the system.

There are several reasons for this:

1.The account password is incorrect.

2.Arrears.

3.Connection error.

Check it out for yourself and see if you can fix it.

There are many reasons why error 769 occurs, and the reason for this is that there is no connection to the remote computer.

First of all, start with the easy part and see if the hardware is connected correctly, I have encountered someone who connected the splitter incorrectly, resulting in error 769, which is easy to overlook.

Second, see if there is a problem with the cat or the route.

If there is no problem with the above, then check whether the network card and the computer are connected normally, some people inadvertently disable the local connection, as long as it is enabled. Ping at the start of the run to see if the connection between the cat and the computer is connected.

There is also a situation that you can't find the network card or the network card driver is not installed, replug the network card or reinstall the driver. I guess it should all be solved. If there is no problem with these aspects, ask the ** station to see if it is in arrears or the fault of the line.

It's okay to hit ** to report for repair.

If "Error 769" is displayed for broadband Internet access, it is usually caused by the network card being disabled or the network card driver is damaged

1. Disable and re-enable local connections;

2. Reinstall the NIC driver;

3. If the network card is not integrated, clean up the network card and replace a slot;

Fourth, if it is 769 caused by the failure of the firewall program, it is generally solved by restarting the computer.

Broadband connection error 769,841 Cause:

1. The NIC is disabled;

2. The network card is damaged or the driver is lost.

Solution: 1. Right-click "Online Neighbors" - Properties, check whether there is a "local connection", if the "local connection" is gray, click the icon and select "Enable", you can connect to the network normally;

2. Restart the NIC or reinstall the NIC driver;

Reboot method: Right-click "My Computer" - select "Properties" - click "Hardware" - enter "Device Manager" - select "Network Adapter".