How to run the installation of ghost win7 sp1x32 under the administrator of the computer company

Hello,This is not installed in the windows environment,It's a ghost installation under DOS,You can burn it to a disc or make a USB flash drive boot tool,Start the installation with a USB flash drive or CD,Please see the instructions for details。

Here's what is reproduced:

1. Disc installation (recommended).

Please use the burning software, select the image burning method to burn the ISO file, please check the accuracy of the file before burning, and the burning speed.

24x is recommended

a.Automatic installation.

For installation, please set the boot from disc in the BIOS, then enter the disc boot menu, select menu item 1 to install automatically!

b.Manual installation.

Copy the gho file under the disc to the hard disk, then reboot the settings disc boot, and then select Manual Ghost11 to do it manually.

ghost to install!

c.Hard Disk Installation:

pieces, put it on a partition that is not on a C drive, such as a D drive, and use WinRar or Haozip to decondense it. Open the unzipped folder, (note the files.)

folder name, because the hard disk installation tool does not recognize folder names with Chinese or spaces). Run the hard disk installation. exe, select the second item "Also."

Original partition", make sure to restart the operation for a fully automatic installation.

2. Hard disk installation.

Use the virtual drive software to load this image ISO file, open my computer, there will be an A: disk, open the A disk to run inside.

In this program, select the third item in the pop-up menu to fully automate the installation of the system!

Right-click to run as administrator.

I'm just here to do the task.

It can be installed on a hard disk or a USB flash drive.

Open the application and automatically run the point to install the system to the C drive, and then it will be restarted, and you can start the installation.

Turn on the autorun dot to install the system to the C drive and it will restart.

The steps to install the Ghost Win7 SP1 system are as follows:

Preparation: A USB flash drive that can be used normally (the capacity is recommended to be more than 4G).

Learn about the shortcut keys for computer USB flash drive startup.

Steps to install the system to the local computer:

1. First of all, make the U disk into a U depth U disk boot disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the U disk to start into the U depth main menu, select the "U Depth Win8 PE Standard Edition (New Machine)" option, press the enter key to confirm, as shown in the figure below:

2. Enter the Win8PE system, the installation tool will pop up by itself, click "Browse" to select and save it to the Win7 system image file in the U disk, as shown in the figure below:

3. Wait for the U Deep PE Installation Tool to automatically load the Win7 system image package installation file, just select the installation disk location, and then click the "OK" button, as shown in the figure below:

4. At this time, click the "OK" button directly in the pop-up prompt window, as shown in the following figure

5. Then the installation tool starts to work, you need to wait patiently for a few minutes, as shown in the figure below

6. After completion, a prompt will pop up to restart the computer, click the "Yes (Y)" button, as shown in the following figure

7. At this time, you can unplug the U disk, restart the system to start the installation, no need to operate, wait for the installation to be completed, and finally restart it once before entering the system desktop, as shown in the following figure:

Ghost Win7 SP1 installation steps:1、Insert the PE system disk,Then press the F12 key when booting up,Enter the quick boot menu,Select U disk or CD (see which disk the PE system is on which disk);

2. Click on the universal one-click ghost;

3. Manually run ghost;

4. Enter the ghost interface and select local-->partition-->from image;

5. Select the win7 ghost file and click open;

6. Select the hard disk you want to install and click OK;

Note: Be sure to see clearly which is your own hard disk, which is an external hard disk, and which is a USB flash drive.

7. Select the partition you want to install and click OK;

8. Click yes, and then the system will start the automatic installation.

1. First of all, back up the C disk and desktop files, and use the decompression tool to decompress the ghostwin7 image of the computer company to the partition outside the C drive;

2. Click "Install System." exe", "one-click installation", open the installer;

3. Run the OneKey installation tool, select the drive letter C disk to install the system, and OK;

4. The prompt will delete all the data of the C drive, and click OK to start the system file extraction operation after confirming that it is correct;