Computer whiz coming to Kangkang? Let s get a computer master!

Meaning: Reboot and select the correct boot device or plug it in to boot**Select Boot. And if the hard disk is successfully detected, it can enter the system. Reasons for hard drive detection failures:

A: The motherboard BIOS is out of power, or the BIOS settings are wrong, and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason. Workaround:

Replace the BIOS battery and re-enter the BIOS to test the hard drive. Open the case, remove the shiny battery on the motherboard, and then try to install it after a few minutes, unplugging the case power cord first.

b:IDE SATA cable is of poor quality or plugged in. Workaround:

Change the IDE SATA cable or plug the IDE SATA cable into another IDE SATA slot on the motherboard, do not connect the hard disk cable with other IDE devices, such as optical drives, separate the two IDE cables, and set the master and slave disks correctly.

C: The hard disk is faulty and may need to be replaced.

D: There is a problem with the boot sector of the hard disk. You can check in the BIOS first, whether you can find the hard disk in the BIOS, if you can't find the hard disk in the BIOS, which may be the hard disk is broken.

If you can find the hard disk in the BIOS, set the optical drive to boot, put the system disk in the optical drive, and reinstall the system.

The English prompt indicates that there is no device that can be booted, and it is more likely that the hard disk is not detected, or the system is faulty.

It is recommended to open the chassis and check whether the hard disk data cable and power cable are plugged in.

If there is no problem, press F2 or Del when booting up, enter the BIOS to check the boot settings, whether the hard disk is detected, and whether the hard disk is set as the first boot device.

If there is no problem, the system is damaged, and it can be restored to normal by reinstalling the system.

If you don't start the device, if you haven't changed the mode of the hard disk in the BIOS, it means that the system disk is off, and the system does not detect the boot partition, it may be that the boot partition of the system disk is damaged, and reinstalling the system can solve it; If it's just a loose hard drive, open the back case of the laptop and reseat the hard drive.

Enter the BIOS settings to boot from the hard drive.

What system do you want to install in a different program?

cfus bye bye delete bei delete bei make up a score line.

Format the USB flash drive first, and then make it. In addition, some USB flash drives have write protection, which needs to be opened on the USB flash drive. In addition, the registry can also be set with write protection, which needs to be turned on.

The centripetal force, pointing to the center of the circle, is called centripetal force, if the centripetal force is positive, the opposite of it is of course negative. The centripetal force calculated by the centripetal force formula must be positive, and the actual use depends on your regulations.

The bottleneck is up, the CPU motherboard is pulling back, and you can change the i3 9100f.

It is recommended to send the configuration, this picture is useless.

It's not Cai Kangyong, the Kangkang you are talking about should have been discovered and promoted by Wu Zongxian, and he was the one who hosted the show together! It's also quite a joke!

It is Cai Kangyong, who is the host of Kangxi in China Entertainment Satellite TV and Xiao S.

It's not Cai Kangyong, it's from China Entertainment TV, and it's also the host of the show, which is very funny

With him are Wu Zongxian, as well as Nono

There are blacks, piglets

A lot of pulling

Cai Kangyong: I think he still has his own hosting style.

Kangxi, who hosted with Xiao S, is here

There are so many people who have Kang in their names, and anyone can be called Kangkang

What the hell did you see? Explain the white sprinkle

The latter is right.

The problem with the former is that the meaning of reason itself is words that explain why, so explaining the reasons does not make sense, or it is a mistake of semantic repetition.

Hello, your understanding is right, because your Weibo is only visible to yourself, so there is no other person **, and there is no reading tag displayed.

Yes, only you can see it means only you can see it.