Why does the oppof1s keep showing loading after factory reset

Hello, I'm oppof1s, as long as you turn off the wifi and go straight to the next step.

1. Eliminate hardware damage, whether it is water, drop or squeeze the mobile phone;

2. Installing software with poor compatibility causes the system to be abnormal;

3. Problems with the system itself, such as system instability after root;

4. The firmware of the mobile phone is damaged, which can be solved by redoing the system upgrade of the mobile phone;

5. If the battery is fed, it is recommended to charge for 30 minutes and then press and hold the power button for 10 seconds to try;

6. If the above methods still do not work, it is recommended to go to the local customer service center to deal with it.

National Customer Service Center Inquiry Link.

If you have any other questions, you can enter the OPPO enterprise platform to ask customer service questions!

Hello, the operation method of the mobile phone stuck in the boot animation interface: 1. Eliminate hardware damage, whether it is water, drop or squeeze the mobile phone; 2. Installing software with poor compatibility causes the system to be abnormal; 3. Problems with the system itself, such as system instability after root; 4. The firmware of the mobile phone is damaged, which can be solved by redoing the system upgrade of the mobile phone; 5. If the battery is fed, it is recommended to charge for 30 minutes and then press and hold the power button for 10 seconds to try; 6. If the above methods still do not work, it is recommended to go to the local customer service center to deal with it.

Turn off the mobile phone, press and hold the power button and the volume up button at the same time, and when a few lines of letters appear on the screen, select yes, and the two lines are to clear the data, and the volume button is to move, and the power button confirms, and the letter R starts with the authentication power button to confirm that the phone will automatically turn on.

You can enter the recovery mode to clear the data for restarting.

If the phone freezes or can't be turned on for various reasons, you can enter the recovery mode to clear the data and restart.

You can also restart your phone in recovery mode, and you only need to click "Restart Phone" to turn it on.

Also enter the recovery mode for system installation and upgrading, and the shortcut key is [shutdown key + volume down key] to enter.

We just have to select the ROM package in "Storage from phone" and wait for the system installation to complete after choosing.

There is no better way, press the power to turn off the power, put it on for a period of time, and it always can't be turned on, just go to flash the machine.

Is it settled? Mine is the same as yours, stuck on the loading screen.

There may be an error in the system, go to the after-sales service to see.

First turn off the phone completely, and then press and hold the "volume down key" + "power button" at the same time until the hboot interface appears on the phone, then let go, press the factory reset item in the volume selection page, and press the power button to confirm after selecting to clear all data and restore to factory settings.

Perform a forced shutdown first if it is not good.

Press and hold the power button and volume key to clean up the data.

None of the above will work, it is recommended that you bring your mobile phone and warranty card to the customer service center for inquiry and repair.

Hello, factory reset will clear data, mobile phone app will restore application progress, etc., please be patient, if you have not entered the interface for a long time, it is recommended that you shut down and restart to see.

To avoid abnormalities caused by junk files, you will back up your mobile phone data, and try to double clear your phone Press and hold the power button + volume down button at the same time in the shutdown state for 10 seconds, enter recovery mode, and select the volume up and down buttons to "clean data and cache", and the power button is OK, you can Ha If you have other questions, you can enter the OPPO enterprise platform to ask customer service questions!

If the smartphone is stuck in the boot animation interface during use, it is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone; If your problem cannot be solved, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

If the phone can be turned on normally after restarting, it is recommended to optimize the phone as follows:

1. Uninstall the recently installed software to eliminate the incompatibility between the software and the system;

2. If the battery is fed, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%.

3. The system is unstable due to system abnormality or root, flash the system as soon as possible to repair the system;

Answer: Hello pro The smartphone is stuck in the boot animation interface during use, it is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone; If your problem cannot be solved, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

If the phone can be turned on normally after restarting, it is recommended to optimize the phone as follows:

1. Uninstall the recently installed software to eliminate the incompatibility between the software and the system;

2. If the battery is fed, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%.

3. The system is unstable due to system abnormality or root, flash the system as soon as possible to repair the system;

Explain that your update is not completed should. Generally, system updates default to bedtime at night. Yours must be updated 100 percent.

It's all done. Turn it back on. This is so that the system can return to normal.

Or maybe you're rebooting it. Hope it helps, thank you.

That is, your mobile phone is scrapped, and it won't go in, you find a mobile phone repair shop to brush the phone again.

To shut down, it is best to take out 1, turn off the phone first, take out the mobile phone ** card, put on the battery, and cover the back cover.

2. Press and hold the power button and the volume + button at the same time, wait for about 3 5 seconds, and wait until the Newman logo appears to be released, and the robot will fall to the ground after release.

3. At this time, you just press the "small house" button, and a lot of English words will appear immediately (see the picture below).

4. At this time, press the volume - button to lower it until the line of wipe data facetory reset!

5. After adjusting, press the menu button again, and a lot of "no" English words appear, 6. Then press the volume - button to lower down, until the line of yes --delete all user data!

7. After adjusting, press the menu button again, the robot stands up, and a lot of English words appear next to it, at this time, the phone is cleaning the data, wait for 3 5 seconds, the first step is to clean up the data successfully! 8. Next, press the volume - button to lower it until it reaches the line of wipe cache partition!

9. After adjusting, press the menu button again, and a lot of English words appear next to the robot, at this time, the phone is cleaning the data, wait for 3 5 seconds, and the second step is to clean up the data successfully!

10. After the second step is to clean up the data successfully, press the menu button, the phone screen will go off, don't touch it at this time, it will automatically start after a few seconds, and Newman's logo will appear! Don't touch it at this time, wait for about half a minute, because the data of the phone has been cleaned up, and the startup will be relatively slow, wait patiently! The phone will automatically turn on, and after that, you can turn it off, install the phone ** card, and then turn it on!

You can readjust the time, desktop map, and other settings yourself!

1. After the phone is restored to factory settings, the program will re-identify the new system files, which will cause the phone to be too slow, and it can be turned on after waiting for 5-10 minutes.

2. If there is no response, you can use the factory mode to double clear the data, and then restore the factory settings again.

3. If the fault persists, it may be caused by hardware failure, and it is recommended to send it to the maintenance center for testing.

Here's how to factory reset your phone:

1. Manually enter recovery mode. (Press and hold at the same time when the power is off: volume down + power button).

2. After entering the recovery mode, select [Wipe Data Factory Reset], then [Wipe Cache Partition], and if prompted, select [Yes].

3. Select [Factory Reset] and wait for the phone to automatically restore to factory settings.

When the Android system is turned on, it stops in the Android logo interface to indicate that the system can no longer be started, it may be that the mobile phone **OTA has not been automatically double-cleared after upgrading, resulting in confusion in the system cache, or the system must APK has been deleted, or a different version of the APK has been replaced, resulting in failure to boot. It is recommended to enter the recovery mode to perform the double-clear wipe operation. Recovery mode refers to a mode that can modify the data or system inside the Android machine (similar to WindowsPE or DOS).

In this mode, you can flash in a new Android system, or backup or upgrade the existing system, or you can restore the factory settings here. How to enter recovery: 1. After turning off the phone completely, press and hold the volume button + power button to enter the bootloader interface (some mobile phones may be different, most of them are volume up or down + power button); 2. Press the volume button to move the cursor to the recovery line; 3. Press the power button, and then the phone will automatically reboot into recovery mode.

The volume button is the cursor selection key, which can be used to move the cursor, and the power button is the confirmation key. The steps for double wipe are as follows:1

In recovery mode, use the volume down button to select WipeData FactoryReset. 2.Press the home button to execute the wipedata factoryreset command, then use the volume down arrow to select yes--deletealluserdata and press the home button to execute the command.

3.After the yes--deletealluserdata command is executed, the execution starts. 4.

Press the volume down key to select the wipecachepartition command and press the home button to execute. 5.After executing the wipecachepartition command, select yes--wipecache and press the home button to execute the command.

6.After the yes--wipecache command is executed, it means that the wipecachepartition has also been executed successfully. After the wipecachepartition and wipecachepartition are successfully executed, select rebootsystemnow to restart the system.

Hello, when the reminder appears on the phone, the phone is recovering relevant data and applications, please wait patiently for a few minutes to turn on. If you have other questions to consult, you can enter the OPPO enterprise jujube Zen cheats platform to ask customer service questions!