99 Hisense 8 inch floor speaker which speaker is used?

In 99, Hisense's eight-inch floor speaker used the speaker of Yanwu.

If he uses a loudspeaker, some specific relevant information may need to be checked on his product label.

99 Hisense 8-inch floor speaker which speaker is used? You should check some information on the Internet, or go to the 4S store to find out.

If you want to know99Which speaker is used in Hisense floor speaker,Then you only need to look for the details of this speaker on the Internet,There are types of speakers in the parameters。

It may be more difficult for the 99-year-old product to match the original speaker of the same model, because the production process of the speaker and the materials used are updated very quickly, and the old products are constantly eliminated by new products with better sound quality and materials. So don't be entangled in which one it originally used, as long as the speaker's power, impedance, frequency response and speaker caliber meet the requirements of the speaker to replace the speaker, it will be better to replace the sound quality with the current product.

If you must know the brand of the original speaker, you can get it from the following channels: look at the label behind the speaker. 2. If the speaker is not labeled, you can find relevant information on the Internet (mainly for speaker maintenance**). 3. Contact the manufacturer for consultation.

Floorstanding speakers have better bass.

Do you have to take apart the horn to know what the horn is?

Domestic horn Feile, silver flute, South Whale and other famous brand horns are possible.

Miscellaneous 8-inch floor speakers,**800More than a pair,The bass is OK。 Best value for money, available online. 2.In addition, there are DIY Huiwei 8-inch speaker assembled floor speakers, **1,000 to 2,000, good bass, cost-effective.

Ninety-nine years of Hisense eight-inch floor speaker speaker,You can see all his brands after you take it apart,Then you can know what it is。

99Which speaker does Hisense's eight-year-old floor speaker use? I really don't know about this, if you have one, you can ask customer service.

In 99, the used speaker of Hisense's eight-inch floor speaker went directly to the small household appliance maintenance office to install one.

This should be a very backward rafa or it is basically no longer collected.

Is your horn broken? Still curious?

8 inches is a woofer, but there are many different brands, and there are also different **, different bass.

120W mono effective value is large enough, and peak-to-peak is too small.

Bass effects and amplifiers. The cabinet is related, and the speaker phase is reversed and the bass will be canceled out.

Did you make your crossover yourself? If yes, check if your soft fold frequency is calculated correctly! If it's a finished product, then you'll have to redesign the parameters of each component according to your horn impedance.

In addition, the length of the speaker guide tube also has a great impact on the bass; You can try lengthening or shortening it and try it out with your ears.

4 ohms, 120w push 8-inch dual speakers, the power is indeed a little smaller. It is best to go up to 200W up to the power amplifier.

You can use a 200w Yamaha amplifier or a crown one.

If you are on a budget, you can configure the SS-8 Plus as a mid+ bass; K1, as a treble, two ways are sufficient, no three-way is needed because the SS-8 Plus's midrange and low frequencies are excellent, which is enough to cope with the average Hi-Fi level ** postback.

If the budget is sufficient, then the D-8, 8 can be configured"As a bass, the DMA-A 5"The middle is the midrange, and then the RT2C-A ribbon tweeter is configured, so that the sound of the equipped speaker can already be close to the Hi-End level.

Bass with ST8, midrange with DMB-A, tweeter with SS1 crossover, Huiwei dedicated three-way B8

configuration, any speaker can make you Huiwei in seconds.

If the bass of the speaker is not good, it means that the speaker is not well designed--- the volume of the speaker is not large enough (the volume of the speaker is not large enough, the bass cannot dive--- because the bass of the speaker needs enough space inside the speaker to resonate a good bass).

If the rumbling sound is serious, there is a problem with the size of the speaker--- resulting in a serious standing wave of the speaker, so that it cannot be used normally.

The size of the speaker cannot be an integer or a multiple, that is, it cannot be 1 to 1 to 2, or 1 to 2 to 3; It should be a ratio, or a ratio of 1, that is, there must be a decimal after the integer, and it is not a multiple relationship to avoid standing wave interference.

In addition, the speaker should not be installed with two 8-inch speakers--- because the power is too large, the power amplifier does not have enough power to push--- and loses normal control of the speaker.

Because the power of the power amplifier needs to be 2 times the power of the speaker--- that is, if the sum of 2 8-inch speakers is 100W (one is 50W), it needs 200W power amplifier to promote the sound to be good, and the sound is better if the distortion is small (the power amplifier can only use 50% of the power, there is basically no distortion).

An 8-inch speaker is better for bass (a 50W speaker only needs a 100W amplifier).

As long as the volume of the speaker is large enough --- the size does not cause standing waves, it is very good, there is no need to install 2 8-inch speakers--- waste of silver + reduce the sound effect.

The sound of the speaker is good, which is related to the power of the power amplifier, and also related to the size of the speaker and speaker; In addition, the size of the inverter is also related to the bass.

The sound-absorbing material in the speaker can only adjust the brightness and darkness of the sound, and it is not a key factor.

The others are not even necessary for the speaker--- and it doesn't matter if they are there.

The songs are mostly two-channel stereo, and the two-channel of the dual speakers can restore the stereo effect, and the natural sound field effect is better than that of mono. Theoretically, this is the case, but in practice, there are many factors that affect the sound quality, such as the quality of the speaker itself, whether the power amplifier is Hi-Fi level, and the quality of the sound source.

Whether it's a song or a **, the content in the two channels is not exactly the same. Just like when listening to stereo sound with headphones**, the effect of listening in one ear is very different from listening in both ears. The speaker should also be configured in at least a pair to better feel the stereo effect in **.

The same brand is definitely a good pair.

The horn has power, impedance, according to the speaker power impedance with power amplifier board.

The size of the horn has nothing to do with the power, and the big horn also has a small power. Small speakers also have a lot of power.

The amplifier boards on the net are all 4 ohm output power.

4-8 ohms is only 4 ohms of power, you can connect to 8 ohm speakers, but the output power is half smaller.

It's best to buy a 4-ohm speaker, which is good for the amplifier board.

For example, the 4 ohm 40-60W 6-8 inch speaker is equipped with a 60WX2 output TDA7294 power amplifier board, which has first-class sound quality. The transformer needs to be equipped with 200W for the power to be good enough. (The 8-inch bass is a little better, do the floor speaker.)

6 inches can only be used as a bookshelf box, and the bass is a little worse).

The power of the speaker should not be too large, and it is not good to match the amplifier board if it is too big. Preferably within 60w.

If it is an 8 ohm speaker, connected to a 60wx2 power amplifier board, it will only have 30wx2 power, and the sound is half smaller.