-
Go to Settings > General > Accessibility > Select the audio call method. Then select Speakers. If the phone has been in the water, it is a problem with the shrapnel of the headphone jack, and it is recommended to go to the mobile phone store for repair.
-
The way to exit the headphone mode on the Apple phone is as follows:
1.Replug the earphone cable on the Apple phone, and then plug it in a few times, and the headphone mode will automatically fall back.
2.Or turn off the Apple mobile phone and restart it, generally turn it off and restart it, and sometimes you can turn the Apple mobile phone headphone mode back.
3.Also, if there may be foreign objects in the hole of the Apple mobile phone, please carefully check whether there is any foreign object in the earphone hole of the Apple mobile phone, and take a small cotton swab to clean the earphone hole.
4.If you still can't turn it back, it is recommended to restore the factory settings of the Apple phone, and enter [Settings], [General], [Restore], [Erase All Content and Settings] on the Apple phone in turn, pay attention; Back up the data on your phone when you restore the factory settings to avoid loss.
5.In addition, if you still can't adjust the headphone mode back, you can only send it to the Apple mobile phone for after-sales maintenance, and ask Apple's after-sales service to check whether there is a problem with the hardware that causes the repair to be solved.
-
The headphone mode appears on the Apple phone, how to adjust it back? I can't answer this question!
-
Here's how to cancel headphone mode on Apple 6splus:
Device: Apple 6splus
System: 1. First turn on the iPhone 6splus and click the "Settings" icon.
2. Then click on the "General" option.
3. Click on the "Accessibility" option again.
4. Then swipe down on the phone screen to find and tap the "Audio Call" option.
5. Then check the "Speaker" option.
6. Finally, turn off and restart the phone.
-
The headphone mode cannot be adjusted and is automatic. As long as the earbuds are plugged into the phone, they will change to headphone mode. If the headphones have been.
Unplugging also shows the headphone mode. It should be: This micro switch is caused by the failure of the microswitch, that is, the earphone has been unplugged, but the switch has not been disconnected in time. You can try quickly plugging in the headphones several times to see if you can make the logo disappear.
The headset mode of the iPhone is turned off as follows:Device: Apple 6
System: 1. First turn on the iPhone 6 and click the "Settings" icon.
2. Then click on the "General" option.
3. Click on the "Accessibility" option again.
4. Then swipe down on the phone screen to find and tap the "Audio Call" option.
5. Then check the "Speaker" option.
6. Finally, turn off and restart the phone.
-
1.Open [Settings] on your iPhone, find [General] in the settings page and click to enter 2Find [Accessibility] on the general page and click to enter 3
On the Accessibility page, find [Audio Call Method] and click to enter 4Turn off the Bluetooth headset and click to turn on Auto to ask me if I don't have an audio voice.
-
Apple mobile phone volume display headphones how to turn back,Many people don't know how to adjust, so let's show you the operation steps.
1. Unlock iPhone 11 first, open Settings in iOS as shown in the image below.
2. Then in the settings page that opens, click Accessibility.
3. Then in the page that opens, tap Touch.
4. After that, click on the audio call method.
5. Finally, in the open audio call mode page, check Automatic, as shown in the figure below, the headset mode is gone.
-
How do you adjust the headphone mode back when the iPhone shows it? Let's talk about it first.,Headphone mode,I think the main thing is to prepare to tune him out directly.,Turn it off.,I don't think it's all about that.,Because of the headphone mode displayed,You go directly into that.,So,Click how to set it up? These can be adjusted back, so the current mobile phones are like this, which is very convenient.
-
Here's how to turn the headphone mode back to the Apple phone:Tools Ingredients: iPhone8, iOS15, Settings 1, Open the phone settings interface, and select the general settings option in the window.
2. In the settings window that jumps to you, select the Accessibility Settings option.
3. In the function settings interface of the jump, select the audio call option.
4. In the jump interface, select the automatic setting option to complete.
-
Tool: Apple 7P, System ISO12. The specific steps are as follows:
1. Open "Settings" in your phone and enter "Accessibility".
2. After entering "Accessibility", find "Touch".
3. Click "Audio Call Mode" in the bottom column.
4. Adjust the "Bluetooth headset" to "automatic" to solve the problem.
-
Hello, quickly plug and unplug the earphones several times until the headphone mode is released. Or use a cotton swab dipped in alcohol to rotate and wipe the headphone plug and mobile phone jack (the plug or jack may be oxidized) to try it.
-
The headphone mode appears on the Apple phone, how to adjust it back?
Hello landlord. If the phone is stuck in headphone mode and cannot be exited, this situation is most likely due to the problem of the headset module itself. Because the headphone mode cannot be turned on or off at the system level.
Only the headphone jack can be plugged into the headphone to trigger the headphone mode. When the headphone jack is flooded or dusted and the headphone jack is short-circuited, it is easy to make the mobile phone stuck in the headphone mode and unable to exit, the landlord can try to clean the headphone hole with a cotton swab first. There is also a situation that the shrapnel inside the headphone jack is damaged and cannot rebound, so that the mobile phone is always in headphone mode, and this situation can only be repaired after sales.
If you are using a Huawei phone and the phone does not have a headphone cable plugged in but the headphone icon is displayed, you can do the following: >>>More
The phone becomes a black and white screen, and the color display is not normal, you can check it as follows: >>>More
Hello. Taking Huawei mobile phones as an example, double-clicking the screen turns black because the super power saving mode is turned on, and after the super power saving mode is turned on, only some apps on the phone can be used, the phone's icon and text will turn white, and the background will become black. Simply click on the exit button in the top right corner of the page to exit. >>>More
If your phone is not plugged into the headphone cable but the headphone icon is displayed, you can do the following: >>>More
It may be caused by a short circuit caused by moisture in the headphone jack of your mobile phone, or due to a foreign object that causes poor contact between the contacts in the headphone jack, which can be cleaned with a cotton swab or paper towel; If the problem still cannot be solved, it is recommended to check and repair at an after-sales service point. Here's a closer look: >>>More