How to set the resolution and refresh rate of the LCD monitor for the best performance?

For LCDs, it doesn't make much sense to set the refresh rate, as for resolution, each size of LCD has the best resolution, such as 15"The optimal resolution is 1024-768, once you adjust it to 800-600, the actual resolution does not change, but it can be simulated to become 800-600, because the analog vector operation has errors (simply put, it is basically inexhaustible), so there will be a blurred phenomenon. Therefore, users who generally use LCD do not need to adjust the refresh rate and resolution.

The best resolution is 1024*768

The recommended resolution is 1280*1024

Refresh rate 60Hz

The recommended refresh rate is 70 75hz

15 inch LCD with 800x600 refresh rate 60hz is enough!

17. I haven't used it.

The smaller the better, preferably 60hz

and 1024x7xx that resolution is best.

If it's too big, it's easy to have bright spots.

The resolution depends on what you like, and if you like it bigger, turn the resolution down a little.

If you like the small ones, turn them up a little bit.

The refresh rate of the LCD is usually set to 60, but if it is too high, it will exceed the frequency range of the monitor, and there will be problems such as incomplete screen display, color cast, and screen distortion.

15 inch 1024*768@60hz

17 inch 1280 1024@60hz

19 and 17 are generally enough to set the refresh rate to 60 Hz.

Each brand of display will give you a suggested resolution when it leaves the factory, and you can adjust it to the recommended one.

Different sizes of LCD monitors have different optimal resolutions, for example, 1024x768 for 15 inches, 1280x1024 for 17 and 19 inches, which is also the number of pixels of the LCD, and if you switch to other resolutions, it will be blurry. Due to the different working principles of LCD and CRT displays, the refresh rate of LCD displays is not very important, generally 60Hz and 75Hz.

The resolution is based on clarity, and a refresh rate of 60 is sufficient.

The current 17 LCD quality is good, brush 1024*768, the refresh rate doesn't matter, it's okay.

Hehe, mine is LCD, the standard configuration of 15 is 1024 768 75hz

What screen refresh rate and resolution your computer can set depends not only on your monitor and its drivers, but also on your graphics card and its drivers. In other words, the operating system can only set the refresh rate and resolution of the screen if both the monitor and graphics card support a certain refresh rate and resolution mode.

If both the monitor and graphics card support more refresh rates, but the computer screen refresh rate can only be set to one such as "60Hz", it is possible that the monitor or graphics card driver is not installed correctly.

Let's take a look at the congratulatory composition of the LCD display. Generally speaking, an LCD monitor is made up of the following parts:

1. LCD module.

Glass substrate: Inside are liquid crystals and grid-like printed circuits. Timing control:

It is used to generate the timing and voltage required to control the deflection of liquid crystal molecules. Lamp: Produces a white light source state.

Backlight: Reflects the light generated by the lamp onto the LCD screen.

2. a control panel.

The control board plays the role of signal conversion. Converts signals from various input formats into signals with fixed output formats. For example, the input signal to the screen of 1024 x768 can be 768, etc., and finally converted into the output format 1024 768.

1. Ordinary low-end LCD monitors usually have a default refresh rate of about 60Hz, which is the best refresh rate parameter value at the default resolution. If the refresh rate parameter is set by the user to exceed this value, the circuit will work in an overclocking state, and the display with poor constitution is very easy to be damaged.

2. The refresh rate index of high-end products can reach up to 200Hz, such as 144Hz monitors required by gaming and e-sports. hkc x3 144hz。

3. The vast majority of people's vision is at 60Hz refresh rate, and there will be no feeling of screen flashing. However, when the refresh rate is set too low, you can feel the flickering effect of the screen switching screen, so the 60Hz refresh rate can meet the needs of ordinary mobile applications such as office, browsing, watching movies, and online games.

4. The hard indicator 144Hz refresh rate required by gaming and e-sports monitors can make the victory or defeat of the master in a millimeter. For example, 144Hz can see every detail of the battlefield more clearly, including the movement of opponents, the control of crosshairs, etc. When the refresh rate is 60Hz, the duration of each frame is about 16ms, and the total time for 3 frames is 50ms, while at 144Hz, it only takes 21ms for 3 frames.

Click Settings --- System --- Display --- Advanced Display Settings are missing.

Select the monitor you want to use and click on the Monitor Adaptor Talker.

property. <>

Select the Monitor interface and set the refresh rate.