Go fast, or stay, how to keep the amount in wire cutting fast wire processing

Updated on society 2024-04-20
27 answers
  1. Anonymous users2024-02-08

    If I were you, I'd go. No matter how you think about it, I feel that you are a little selfish and irresponsible to delay like this... It's just that I covet your love and kindness to her, so I don't want you to go away, I don't like it, I wish you to find happiness soon, haha!

  2. Anonymous users2024-02-07

    It's good for people to be used stupidly.

    She doesn't like you at all!

    What kind of effort do you still hold on to this kind of thing without the following?

    Get out of here. Then disconnect everything.

    Even if she cries and begs you, don't pay attention to her.

    It's not worth it. How many good girls.

    Why is it buried in the hands of such a person?

    Also, tell her boyfriend to go again.

  3. Anonymous users2024-02-06

    Come on! If you've been in this situation for more than a year, you can be sure that she doesn't care about you at all, and to put it mildly, she's taking advantage of you. I believe that the landlord will definitely find a better one in the future. Blessed.

  4. Anonymous users2024-02-05

    Let's get out of here, this kind of girl is unappetizing!

  5. Anonymous users2024-02-04

    You're stupid. Pure shabu shabu. Sober is highly recommended.

  6. Anonymous users2024-02-03

    You've asked before! I told you to leave!

  7. Anonymous users2024-02-02

    If so, I would like to say, why didn't you realize earlier that you are mainly a business, and you are only 23 years old, why are you in a hurry to find a partner? Now that you've come to this point, let's keep her and don't hurt a simple heart! If she's a good girl, if you're a good man, then you're responsible for her!!

    Got it?? It seems that he is still young, and he is at a loss for this matter!

  8. Anonymous users2024-02-01

    Pretty, isn't it? What about the other advantages? It seems that you didn't talk about some of her merits.

    Personally, I feel that you can't keep it in your current mood.,You'll regret it later.。。

    In fact, if the culture is low, you can read more books, and you can take care of it if you are not in good health. Men are supposed to take care of women. And she can't even help you sell your phone? It's nothing but a cough.

    You're only 23, and the days of making money are ahead.

    If you think this girl is good, just stay.

  9. Anonymous users2024-01-31

    You're a stupid x...

    Speechless to you ...

    Keep her...

    Easy to ask for priceless treasures, rare to have a lover...

    Foreign things are dead, people are alive...

    Things outside the body can be earned at any time.,It's not easy to find someone who is single-minded to yourself.。。。

    If you miss her, you may never meet such a thing in your life...

  10. Anonymous users2024-01-30

    Fate always plays tricks on people, the child well, and this daughter-in-law of yours is not bad. God won't let you down!

  11. Anonymous users2024-01-29

    It seems that you still dislike her, and you treat her as a burden, which means that you don't love her much.

  12. Anonymous users2024-01-28

    Stay, ask all these questions, if you don't stay, the woman will die of sadness.

  13. Anonymous users2024-01-27

    I'm afraid there is no one who can help you in this matter, if you love her, keep her! She was also very sad! You have to learn to see yourself as an outsider, it's all up to you!

    I hope you don't do something that you will regret for the rest of your life! Believe me.

  14. Anonymous users2024-01-26

    Ask yourself, if you like it, if you don't like it, ask yourself more, not ask others here, after all, only the person in question feels best.

  15. Anonymous users2024-01-25

    Of course, you should be talking about the problem of compensating for molybdenum wire, there are 18 molybdenum wires, and the tolerances in machining are in a few ways, and the amount must be retained!

  16. Anonymous users2024-01-24

    Generally, the diameter of molybdenum wire +2 16 molybdenum wire is unilaterally put (16+2) 2=8 and so on.

    Here 2 is the gap of the electric spark.

    If the machine is older, add the difference according to the actual situation. It depends on the condition of your screw rod. It can only be mastered by yourself according to different machines.

  17. Anonymous users2024-01-23

    Just add five wires when programming. If you want fifteen, you can program it to fifteen and five. Five filaments should be enough for polishing. If the machine tool is older, then add ten wires according to the actual situation.

  18. Anonymous users2024-01-22

    Write: Today's young girls, tomorrow's successful women.

  19. Anonymous users2024-01-21

    Brisk walking is not a sport with a fixed speed as a criterion. Brisk walking is an effort to walk as fast as possible, and if you go faster, you will feel uncomfortable walking, and it will be more comfortable to change to jogging. In such a situation, the standard is almost gone.

    Once you've found your standard brisk walking pace, it's okay to increase your speed a little bit and make your body movements a little exaggerated, or slow down a little and give yourself a break.

    There is no fixed speed for brisk walking, because people are different in height, physical fitness, and age. In addition, it is to take out scientific means to measure your standard brisk walking speed, when you are actually walking, let someone take an instrument next to you to measure your speed? There is also special software that uses portable devices (such as mobile phones, wristbands, etc.) to measure your exercise, and the results can be used for reference.

    Depending on the size, 6-9 kilometers per hour is fast walking.

    Walking briskly for 30 minutes a day is as effective in preventing stroke as more intense fast-paced exercise such as jogging, playing tennis and cycling. In addition, it is effective in preventing diabetes, heart disease, osteoporosis, and certain cancers. According to the report, brisk walking is a distance of 1 mile (about 1,600 meters) in 12 minutes, and if you walk briskly for 45 minutes to 1 hour a day, the probability of having a stroke can be further reduced by 40%; For people who do not have the habit of exercising, as long as they walk briskly for 30 minutes a day from the beginning, they can also achieve good results in strengthening their bodies.

    Be sure to warm up before brisk walking, you can exercise on the spot, or you can walk slowly for a while, so that the muscles and joints of the body are active before starting to walk briskly. When walking, the body should not shrink, but should raise the head and chest, swing the arms as wide as possible, and the steps should be large. You should also pay attention to stretching after the end, otherwise the muscles will be tight, which will make people tired.

    If you need to, you should also pay attention not to give up halfway, and insist on exercising for at least 30 minutes a day.

  20. Anonymous users2024-01-20

    Brisk walking, like running, is also in a variety of forms, you can walk by the sea, you can walk in the mountains, you can also walk indoors, but there is also a standard for brisk walking, that is, the speed cannot be less than 7 kilometers per hour.

    The essentials of brisk walking are as follows:

    1. Lean forward 3-5 degrees, raise your head, shoulder and back naturally droop, raise your chest and tuck your abdomen.

    2. The two arms must be swinged, and the height of the arm swing should not be higher than the chest.

    3. Keep your heels on the ground soft, and roll quickly until the balls of your feet hit the ground.

    4. When the two feet land on the ground, step on the inside into a straight line.

    5. Don't have both feet in the air.

    6. Don't overshoot too much, mainly speed up the cadence.

    7. The pulse is controlled at about 120, which lays the foundation for running exercise.

  21. Anonymous users2024-01-19

    Although the hard-earned income is acceptable. You can work less overtime or no overtime first, use some time to try to find other jobs, or **, the Internet to understand the employment information, and then kick this when you have a new job. Some people can't find a job for a few months, and they are also very depressed.

    Nowadays, the employment environment is changing rapidly and cruelly, and there are not many good jobs to find, so you can only find not very good ones, or you have to do it if you are unlucky. You should be independent at your age, away from your parents or other people's financial support, and your parents may not be well-off. If you don't get lucky in the next step, you still have a lot of things to do to achieve financial support.

    Keep up the good work, I used to be in a similar situation as you, I changed 3 jobs in two years, and now I haven't found a better one, good luck. ok

  22. Anonymous users2024-01-18

    Excuse me, but what is Fast Walking? Each place has its own minimum wage, and if the company does not reach the local minimum wage, it is considered illegal. This issue can be reflected.

    Generally, companies are able to meet the local minimum wage. If you really don't think you're suitable for this, or don't mean much, change careers as soon as possible while you're young, but the ugly words are ahead, there is no other ability in these years, and it is still difficult to get a foothold. Believe in yourself.

  23. Anonymous users2024-01-17

    Unless you can double the loss of your mistakes in the future, it is better to apologize for your own mistakes.

  24. Anonymous users2024-01-16

    It's better to find another job, and it is estimated that there will be no good life if you stay.

  25. Anonymous users2024-01-15

    First, speed grasp.

    Generally speaking, walking about a kilometer every 10 minutes is the standard brisk walking, and the usual stride meteor is the brisk walking modality. However, brisk walking is about gradual progress, and the speed can be slower at first, as long as it exceeds the usual walking rate; Once you are in the state, you can speed up day by day to enter the standard brisk walking state.

    Second, the pace should be big.

    One of the obvious characteristics of brisk walking is that the pace should be large, and the big pace and fast speed are the essence of brisk walking. When your pace increases, you will obviously feel the body stretched, then try to shake your arms to achieve a very good health effect.

    3. Persistence every day is effective.

    One or two brisk walks are only considered temporary physical exercises, and they must be adhered to for a long time to improve cardiopulmonary function, make the body healthy and achieve the best goal. If you walk instead of the bus to work every day, you will see the amazing health effect brought by brisk walking for more than half an hour.

  26. Anonymous users2024-01-14

    Moderate brisk walking is good for the body and can also solve the problem of mild fatty liver.

  27. Anonymous users2024-01-13

    You can exercise, especially if it's good for digestion, and the feces can be pulled out smoothly.

Related questions
11 answers2024-04-20

Whether the wire cutting machine should be tightened frequently during the operation of the machine: this point is very important for the consistency of accuracy, because the tightness of the molybdenum wire is different, the size of the cut is different, and the finish is also very different. >>>More

9 answers2024-04-20

The slow wire cutting machine uses copper wire as a tool electrode, generally moves in one direction at a lower speed, applies an impulse voltage of 60 300V between the copper wire and the workmade materials such as copper, steel or cemented carbide, and maintains a gap of 5 50um, and the gap is filled with insulating medium such as ionizer water (close to distilled water), so that spark discharge occurs between the electrode and the workpiece, and the instantaneous high temperature of the electric spark can make the local metal melt and oxidize, and be consumed and corroded by each other, and electro-etch countless small pits on the surface of the workpieceThrough the monitoring and control of NC control, the servo mechanism executes to make this discharge phenomenon uniform, so that the workpiece is processed, so that it becomes a product that meets the required size and shape accuracy. >>>More

7 answers2024-04-20

The questions you ask are not clear in a few words, it is best to find a technical book related to wire cutting to learn, and all problems will be solved. >>>More

9 answers2024-04-20

When you set the taper and cut it, if you want to straighten the position, then you have to cut a knife without a taper, so that the straight position is on it. >>>More

3 answers2024-04-20

<> hello, wire cutting composite mold is a common processing method, which is suitable for the processing of various materials, including metal, plastic, etc. Its processing principle is to use a high-speed electrolyte flow through the electrode to generate an electric spark discharge to cut the workpiece into the desired shape. To cut the wire cutting compound mold, you first need to prepare the corresponding equipment and tools, including the wire cutting machine, electrode, electrolyte, etc. >>>More