The pores of Hetian jade are too fine, will the pores disappear after a long time?

The hardness of Hetian jade is very high, although it is not as good as jadeite. But it's still very high, and after millions of years of river washing, it has become what it is now. Unless you use a tool, you use human hands as a grinding tool, and it will take at least hundreds of years to remove those pores.

It is possible that the sweat and oil on the hands of the time cover the pores and visually appear to be invisible.

Yes, some pores are already fine, and it is possible to play for a long time, but men have rough hands, and it is possible to play every day. However, it is generally played continuously for decades.

The physical characteristics of Hetian jade determine its own characteristics!

The pores of Hetian jade are only found in the original seed material, which is one of the important methods to identify Hetian seed material. The method is to look sideways against the light, which is easy to see.

The sweat pores of Hetian jade seed material will not disappear with the plate play, which is the most typical identification feature of seed material.

The sweat pores of Xinjiang Hetian seed material are naturally formed, similar to the pores on the human **, large and small, unevenly distributed, and the popular point is a tiny pit.

At present, in the jade market, the pores of fake seeds are sandblasted and hand-pointed, which is very rigid, and the sandblasting is dense and the size is almost the same.

The hardness of the seed material is the Mohs hardness, and the knife can't scratch it, so it won't be played with and disappear.

The jade remedies are as follows:

Although jade has a high hardness, it can be broken if you are not careful. After the jade is damaged, it will be greatly discounted. Therefore, China has had methods of repairing damaged jade since ancient times, and some methods have even continued to this day.

Jade restoration: divided into two methods.

After some jade artifacts are damaged, jade carvers will divide them into two according to their damaged conditions through ingenious design and cleverly divided on the original basis. Divide the original carving into two or more independent pieces. This repair technique can minimize the loss of jade, and sometimes the ** of a single piece of jade will catch up with the original.

Jade restoration: gold and silver inlay.

This method is to use gold and silver to inlay the damaged jade to cover up the damage or link breakage. Because gold and silver itself is the most important substance, and it is often used to make two decorations, so the jewelry of gold and silver and jade is also very popular. In China's traditional culture, there is a saying of "gold inlaid with jade", so the repair method of gold and silver inlay is the preferred method for most people to repair damaged jade.

The disadvantage is that the cost is relatively high.

Jade restoration: re-restoration.

Generally, jade damage is mostly in the more prominent position at the edges and corners, and the fractures are covered by simple smoothing and polishing techniques, but generally speaking, this technique has a great impact on the proportion and coordination of the original shape. In the more complex way, the original work is repaired according to the broken area, which is time-consuming and difficult. However, this method is often the closest to the original work, and the degree of restoration is also the most perfect.

Fracture gluing.

Generally speaking, the first method that many people think of after jade is broken is gluing. The operation process of this method is to carefully clean the fractured surface, then evenly apply it with a high-efficiency adhesive, and then carefully align the original part with hard bonding, squeeze out the cracked adhesive, and then fix it with tape or press it with a heavy object to avoid misalignment.

Defect filling.

If there are only a few minor breakages in the jade, it can be repaired by filling the defects. Generally, synthetic resin is mixed with talcum powder, applied to the missing parts, and repaired by carving. Some are also filled with sealing wax and pigments, and then smoothed out the wax surface with a scalded knife or similar flat surface.

Of course, there is a corresponding method for the polishing of Hetian jade pores, and this can be restored to its original appearance through restoration.

The repair of pores on the surface of Hetian jade should be restored by a professional company or professional and technical personnel, because professional and technical departments and personnel have relevant operating tools, and the restoration will have a better effect for reference.

After the fish pores were polished off yesterday, it could not be restored and restored, and there was only one layer of polishing for this pore, and if it was over-polished, it could not be restored.

The pores of Hetian jade have been polished off, and they can be repaired, and now there are masters who specialize in repairing jade, and their skills are very high.

If the pores of Hetian jade are polished off, re-open the hole for him, and it is best to punch a hole in 11000 without a small drill bit of 1 mm for him, so that it is not easy to break. Use a small drill bit of 1 mm to punch holes, so that the accuracy of the hole is two days larger, and it is not easy to break.

If you don't have a word like this, even if you want to restore it if it has been polished, it is basically impossible, after all, it has been processed, and it is impossible to recover.

2.Irregular Pore Distribution Truly natural pore distribution is generally very irregular, with varying degrees of thickness and intensity. The pores of the white seeds look relatively uniform and small, which is the "hardest hit area" of counterfeiting

Especially for seeds with skin color, the pores may be larger in the dark skin color, and the pores will be relatively uniform and small in the light skin color or no skin color.

The original Hetian Yu's woolen pants were worn off, and we still have a way to restore it, and if it is restored, we can bring a better one to everyone.

Fur and pores can be easily imitated. Let's follow Longmu Pavilion to talk about the method and identification characteristics of "fake pores"! .Whether it is a mountain material, a Russian material or a Qinghai material table.

If it is worn out with the part-time job of Tianyou, it will affect the wear, so if we want to recover, there should be technology in this area, right?

Hetian jade pores are polished off, is there a way to restore them? The pores of Hetian jade have been polished off, and there is no way to restore them.

Hetian jade has not been punched, do you have a way to recover? Then you can send it to you for fun, stand up and take a look.

It is difficult to recover the pores of Hetian jade if they are polished out, so you have to do it again.

After the pores of Hetian jade were polished off, I basically had no way to recover them.

The pores of Hetian jade have been polished off, is there a way to restore it, there is no way to restore it.

Share the shape of the pores of the seed material under the macro, the state of the white skin, and the color texture, I hope it will be useful to the students in the jar.

That's it:

The case under macro:

Seed jade full hall: ziyumantang

The surface of the original Hetian seed material is like a human **, and there are pores. The pores on the surface are the unique natural pathways formed by the erosion and impact of the river cement sand. It looks very natural, with different sizes, uneven heights, unevenness, unevenness, and extremely uneven distribution.

Look at the pores of the material, don't look at it directly, take the jade material to see as long as it is polished or fake. The surface has a smooth finish, which destroys the original pore layer, so the better the polish, the less likely it is to see the pores.

The surface of the false pores goes straight to the pores in one direction, without the feeling of unevenness in different sizes, and some parts of the raised head are flat, which is grinded, and it should be sandblasted without polishing and polishing, and the sandblasting surface is too rough to show the feeling of oil.

How to identify the quality of Hetian jade, take a look at a few key points:

1. Hetian jade has a delicate texture. The so-called delicate texture is to present a moisturizing feeling. A good piece of Hetian jade is as moist as a piece of "clotted fat", white jade is like mutton fat, like lard, and topaz is like chicken fat.

2. Hetian jade can be seen with the naked eye fine small cloud flakes and cloud-like jade flowers, which is the unique texture characteristics of Hetian white jade.

3. The luster of Hetian jade is very mild, which is due to the fact that there are very fine concave and convex surfaces, similar to ground glass, which can be seen with a magnifying glass of 10-20 times, so the reflection of light is not very strong. Hetian jade is "refined and bright," like a man of elegance, with a gentle temperament, and his talent is inwardly and unassuming, so it is gentle -- the word "warm" best sums up the characteristics of Hetian jade, and it is often said that "warm as jade" represents the traditional aesthetics of the Chinese.

4. In addition to the delicacy reflected in the appearance, another important criterion of "strong vein" is that it is hard and does not eat knives. A real piece of Hetian jade, carved on its surface with an ordinary knife, does not leave any scratches. On the contrary, what can be easily carved with a knife is not Hetian jade.

And it can scratch the glass without hurting itself. Observing the carvings, due to the strong toughness of Hetian jade, it is not easy to collapse when carving, and other jade has poor toughness, is relatively brittle, and is easy to collapse. Therefore, many quartzite-like jade stones are pressed out of molds at high temperatures, and there are no traces of hand-carving.

5. Because of the "tight vein", it is heavy, and there is a feeling of heavy pressure on the hand. Hetian jade has a dense and delicate texture, moisturizing and soft, with oily luster and heavy weight. These features actually come from one thing:

The veins are tight. Because it is tight, it is heavy, so delicate and moist, so it is tough, so it is not too transparent.

6. Look at the color. Due to the different colors, Hetian jade is divided into white jade, topaz, green jade, green and white jade, jasper, and black jade. In the case of similar texture, topaz is the most expensive because of its rarity, followed by white jade, and the value of green and white jade, green jade, jasper, and black jade is lower.

Sheep fat jade refers to those with extremely white color and delicate texture, which is very expensive. Many white jades are white and blue or gray in white.

7. Look at the skin. Hetian seed material is often skinned. Skin-looking has become an important basis for identifying seeds.

Nowadays, there are a large number of artificially dyed Hetian jade on the market, on the one hand, because of the current fashion to play with skin, on the other hand, it can make people believe that it is seed material. Most of this kind of processing comes from Xinjiang and Henan. The basic differences between genuine leather and artificially dyed fake leather are:

Fake skin is a thin layer of color floating on the surface, bright color; The color of the dermis penetrates into the inside, the color is natural, and the surface is slightly concave and convex, which is called "pores" in the line.

Source: National Cultural Artwork Network.

I have a few of these stones in my house, which are white by electric light.