What does OVM anchor mean? What does anchor BM, OVM mean

ovmAnchors(Oriental Cone Anchorage) is a scientific and technical term for highway transportation published in 1996.

Due to its excellent performance, it has been widely used in bridge construction, prestressed concrete, steel structure, highway construction, and high-rise buildings at home and abroad.

Mining, geotechnical anchoring.

Slope management, hydropower and nuclear power construction and other fields. The annual production capacity of OVM anchorage system anchors has reached 36 million holes, ranking firmly in China and Southeast Asia.

Regional number one.

The anchoring efficiency coefficient of the OVM anchoring system anchor is high, the anchoring performance is very stable and reliable, and the adaptability is wide, under normal circumstances, a set of anchors can anchor 1 55 steel strands.

The maximum number of anchored strands has reached 109. Strands with diameters of can be anchored.

The anchorage specifications commonly used in China are:

a) M15 N anchors. m stands for anchor (anchor in Chinese pinyin.

the first letter); 15. The specification of the steel strand represents the nominal diameter of the national standard.

mm steel strand, (the steel strand strength generally used in China is 1860 MPa nominal diameter mm steel strand); -n refers to the number of strands to be loaded.

b) M13 N anchors. m stands for anchor (the first letter of anchor in Chinese pinyin); 13. The specification of the steel strand represents the nominal diameter of the steel strand, (the steel strand strength generally used abroad is 1860 MPa grade nominal diameter steel strand); -n refers to the number of strands to be loaded.

The above content reference: Encyclopedia--ovm anchorage.

OVM is the leading brand of Liuzhou Ovim Machinery Co., Ltd., and it is also a well-known trademark recognized by the Trademark Office of the State Administration for Industry and Commerce.

OVM anchorage anchoring system is the company at home and abroad to absorb the advantages of the steel strand anchoring system at home and abroad and production, quality control experience on the basis of the successful development, in 1990 through the expert appraisal, in 1991 by the first production office as a key new product trial project, and won the national utility model patent, patent number, was the Ministry of Construction listed as a scientific and technological achievements promotion project, after more than 10 years of successful use and continuous research, Today, the OVM anchorage system is one of the most successful prestressed group anchor systems today. Due to its excellent performance, it has been widely used in bridge construction, prestressed concrete, steel structure, highway construction, high-rise buildings, mines, geotechnical anchoring, slope treatment, hydropower and nuclear power construction at home and abroad. The annual production capacity of OVM anchorage system anchors has reached 36 million holes, ranking first in China and Southeast Asia.

The anchoring efficiency coefficient of the anchor of the OVM anchoring system is high, the anchoring performance is very stable and reliable, and the range of adaptation is wide, under normal circumstances, a set of anchors can anchor 1 55 steel strands, and the maximum number of anchored steel strands has reached 109. Strands with diameters of can be anchored. Its performance indicators meet the requirements of the International Association of Prestressed Concrete (FIP) 1993 "Acceptance Proposal for Post-tensioned Prestressed System" and the national standard GB T 14370-2000 "Anchors, Clamps and Connectors for Prestressed Tendons".

The OVM anchorage system anchor is optimized and designed, with light and reasonable structure, superior performance, wide application, good versatility, safety and reliability, easy to use and significant benefits. Its main technical performance is as follows:

It has superior static load anchoring performance, and meets the requirements of (FIP) 1993 "Acceptance Proposal for Post-tension Prestressing System".

It has excellent fatigue resistance, with a passing stress amplitude of 120MPa and a maximum stress of 2 million times of fatigue resistance tests.

The structure size is small.

Optimization of the structure under the anchor.

It has good self-anchoring performance.

The anchor shrinkage is 6mm.

Anchor wear loss.

Manufacturer name, e.g. owm--- Owm anchor.

CM--- Great Wall anchorage.

YTM --- Yutong anchorage.

BM stands for flat anchor and is mostly used for single tensioning.

OVM is the English abbreviation of Liuzhou Ovim Machinery Co., Ltd.

If you have any questions, you can talk about them in detail, I'm from Ovim.

OVM is the anchor product of Liuzhou Ovim Machinery Co., Ltd., and BM should be a flat anchor.

OVM this model is the anchor produced by Liuzhou Ovim Company, which was originally named by the company itself, and later the product was recognized by the Ministry of Construction, so now many design institutes voluntarily require the use of OVM15- series anchors.

Anchors are used in: highway bridges, railway bridges, urban interchanges, urban light rail, high-rise buildings, water conservancy and hydropower dams, port anchors.

Wharf, rock mass slope protection anchorage, foundation reinforcement, tunnel roof anchorage, prestressed grid, subway, large buildings and halls, warehouses, tower buildings, heavy lifting, synovial intermittent propulsion, bridge and tunnel pushing, large containers and ships, sleepers, replacement of bridge bearings, bridge and building reinforcement, steel engineering, anti-magnetic and anti-corrosion engineering (fiber anchorage), carbon fiber reinforcement, pre-tensioning beam field construction, external prestressing engineering, cable-stayed cables, suspension cables, etc.

"ovm" - ovim".

Liuzhou Ovim Machinery Co., Ltd.'s anchor products.

OVM is the manufacturer's product abbreviation, like the anchor of Kaifeng Zhongqiao is the anchor of the 15 series. A stands for small holes. 12 is the number of holes.

OVM is the **** of Liuzhou Ovim shares.

It is very famous in the industry to do prestressed anchors.

OVM15-2(1) anchor: refers to the anchor products of Liuzhou Ovim Machinery Co., Ltd.

ovm" means "ovim";

15-2 refers to anchoring two steel hinges with a diameter;

1) Refers to the internal enterprise number.

Liuzhou Ovim Machinery Co., Ltd.'s anchor products.

"ovm" - ovim".

15-2 - anchoring 2 steel hinges with a diameter;

1) - Enterprise internal number.

The so-called anchor is a permanent anchoring device used in post-tensioned structures or components to maintain the tensile force of the prestressed tendon and transmit it to the concrete. Anchors can be divided into two categories: (a) Tension end anchors:

anchors that are mounted at the ends of the tendons and can be tensioned; (b) Fixed end anchor: an anchor that is installed at the end of the prestressed tendon and is usually buried in concrete and does not need to be tensioned. The standard of anchors for prestressed tendons is:

National Standard of the People's Republic of China (GB T 14370-2000).

"ovm" - ovim".

15-2 - anchoring 2 steel hinges with a diameter;

1) - Enterprise internal number.

Your model number should be, OVM stands for the abbreviation of Liuzhou Ovim Machinery Co., Ltd., and M is the anchor.

The abbreviation of our beam is to use his anchors.

The abbreviation of OVM Liuzhou OVM anchorage.

It is safe to say that you are talking about a 3-hole flat anchor, which is used on the top plate of the box girder, and the specifications of the two anchors are the same. Hehe.

The implementation criteria are all the same, so the use and technical parameters are the same.

The difference between the letters is the code of each manufacturer, which indicates that it is produced by different manufacturers.

OVM's should be better.

Both are 15 series, i.e. anchors that use strand diameters. The main difference is that 15-7 is a seven-hole anchor and 15-6 is a six-hole anchor.