How can Haier 55 0528 washing machine with casters be used alone to spin dry the bucket?

If you buy Haier's washing machine with casters, then you can use it alone because there is a button on the control panel on it, as long as you press it, you can use a single spin dryer.

Generally speaking, if the washing machine wants to be spun dry alone, it can be carried out by switching the mode to the spin drying mode, if it cannot be switched, it may be a mechanical failure.

With casters, if the washing machine needs to be used as a single-use spin bucket, it can only be used as one, and the other can be turned off.

Select the settings for a separate "dehydration only" (single dehydration) dehydration program; Evenly stack the clothes that need to be dehydrated around the inner circumference of the dehydration bucket and gently press them with your hands; Close the safety inner lid and the lid of the dehydration bucket, then start the washing machine and you're good to go.

Haier's words should not be able to do bicycle wrestling.

Hello, if you use the spin bucket alone, then you can adjust it on the control panel and then adjust it to the spin dry and dehydration mode.

Hello, if you don't use this washing machine, but use a spin dry bucket. You can give. The customer service called a ** and asked him how it was used, and he could give you an answer.

1.Turn on the power switch.

2.Set the function selection knob to single offshift.

3.Open the door of the washing machine, put in the laundry that needs to be dehydrated, and try to distribute it evenly in the bucket as much as possible.

4.Close the glass door of the washing machine.

5.Press the Start pause button, and at this time, the machine will start to perform the single dehydration program.

1.Reasons why the double-cylinder washing machine does not spin the dry barrel 1. Motor bearing damage, lack of oil or burning winding, etc. 2. The brake on the motor of the dry bucket is not released.

3. Excluding the above reasons, there is also the phenomenon of poor contact or disconnection of the door cover safety switch. 4. If the capacitor is variable and the capacity is insufficient, replace the capacitor test machine of the same specification, which should solve the problem.

2.How to maintain the double-cylinder washing machine when the drying barrel does not rotate 1. The speed of the washing machine is very high when the drying barrel is working, and in order to ensure the safety of users, there will be a protection switch.

How to use the 25505 washing machine with casters to dry the bucket alone This specific should be checked about this washing machine, or find some information about the reason, or take a look on the Internet.

The method of direct dehydration of a fully automatic washing machine:

If you want to spin separately from the automatic washing machine, you can choose the separate dehydration program "Single Dehydration (Dehydration Only)" program and start the washing machine. The failure can be caused by the following reasons:

1. For mechanical automatic washing machines, the air pressure switch is not in good contact. (The washing machine goes into rinse state frequently.) ）

2. The drain valve does not pull the clutch switch apart. (The output power is insufficient.) 3. The belt is loose and damaged.

The dehydration noise is particularly loud and clicking. (The inner barrel is stuck.) 4. The computer CMOS ROM curing program is damaged, and finally it is recommended to contact a professional maintenance master for maintenance.

Unplug the power supply, then plug it in, and directly select dehydration! If it still doesn't work, it is recommended to call 4006999999 In addition, the air-drying function of Haier washing machine is mainly aimed at air-drying the inner cylinder after washing clothes, not clothes!

Press the wash button and rinse button several times in a row so that these two keys are not lit, and then start to spin separately.

Presumably your washing machine is a fully automatic or semi-automatic washing machine, if you only need to spin dry separately, you can set the washing time, rinse times and other parameters to zero. Hope it can help you out.

The specific BAI operation steps of single dehydration of washing machine are as follows:

Turn on the power switch.

Set the function selection knob to single offshift.

Open the door of the washing machine, put in the laundry that needs to be dehydrated, and try to distribute it evenly in the bucket.

Close the glass door of the washing machine.

Press the Start pause button, and at this time, the machine will start to perform the single dehydration program.

It should be noted that the single dewatering is still a drainage procedure at first, so there is no response at the beginning of the machine drum, and only the sound of the drain valve is heard, and it will take about a minute before the rotating dewatering bucket will be started. This answer applies to any Haier washing machine.

The operation of the Haier Wave Wheel Washing Machine to dry the laundry individually:

1.Evenly stack the laundry that needs to be dehydrated around the inner circumference of the dehydration bucket. 2.

Cover the lid of the washing machine. 3.The washing machine is programmed with a "spin only" program.

4.Press the start pause button of the washing machine. The washing machine will be dehydrated.

5.At the end of dehydration, the buzzer will sound and stop automatically, and you can take out the laundry.

You can select dehydration in the settings first, then press start, and then close the lid.

Turn on the power, select the separate spin program, and then press the start button.

The method I know is that if there is a self-programming function, then you can turn off the other functions, as long as the function light is not on, you can directly select the dehydration, you can do it, I hope it can help you.

According to the procedure in the following column, you can adjust to single dehydration:

Turn on the DU power switch.

Press the power energy key until the corresponding dehydrated lamp flashes alone.

Open the lid of the washing machine, put in the laundry that needs to be dehydrated, and try to distribute it evenly in the bucket as much as possible.

Close the lid of the washing machine.

Press the Start pause button, and at this time, the machine will start to perform the single dehydration program.

It should be noted that the single dewatering is still a drainage procedure at first, so the machine does not respond at the beginning, and it will take about a minute before the rotating dewatering bucket is started. This answer applies to any Haier washing machine.

Answer: Generally speaking, the countertop of a fully automatic washing machine has several buttons: switch, start, process, setting, and program. Press the on/off key, then press the process button, select the dehydration one by one (the dehydration button flashes), press the setting button (there is generally a few minutes of time period, press to display a time period, to your satisfaction with the time period), press the start button, and the dehydration begins.

That's it.

2.Then press the process button, select the dehydration button one by one, and the dehydration button flashes that means that the question will not move.

Asking questions will only release water.

You're all washing.

After you press the power button, press the program key, press until 08 single off, and then press the start button, just do it, is there a operation, can you single dehydration?

Press the dehydration button on the operation panel to achieve individual dehydration when only the dehydration indicator is on.

Hello, thank you for asking the company.

Dear, please choose the "single off" program, thank you.

You are welcome to ask the company questions again.

We wish you a happy work life

The drum washing machine has an eccentric protection effect, so a single piece of clothing is dehydrated and does not dry.

The drum washing machine puts too little clothes and the machine is easy to eccentric protection, in this state, the machine speed is slow, or it will directly enter the water to go to the washing program, all brands of washing machines are the same in order to protect the clothes, and a single piece of clothing can be wrung out by hand.

Dehydration is a separate program, the normal is drainage, after the drainage is completed, the water level sensor gives a signal to the computer, and the computer controls the motor to rotate and dry at high speed, which has two protection switches, one is the anti-collision barrel protection, and the other is the upper cover closure protection.

When washing a single piece of clothing, especially sweaters or underwear with a lot of moisture, it sometimes does not spin dry.

A, this is the DAO eccentric protection function of the drum washing machine. The eccentricity protection feature is a feature that all front-loading washing machines have. If the clothes are unevenly distributed, the washing machine will shake and distribute the clothes again, and then spin them off when the clothes are evenly distributed. If the laundry is not evenly distributed, it will cause the washing machine to vibrate and shift, and it will damage the washing machine or other items around the washing machine.

When there are fewer clothes, due to eccentric protection, the washing machine may not be spun dry, and some clothes can be added to make the clothes evenly distributed, and then spin drying; In addition, the washing machine will cause the drying time to be extended due to the re-shaking and distribution of the clothes, which is a normal phenomenon set by the program, so please feel free to use it.

This answer applies to any Haier washing machine.

It's the same in my house, when a piece of clothing is dehydrated alone, the time display turns very slowly when it reaches 4, and the display screen doesn't move, just there slowly turns up and doesn't finish.

Don't be funny, okay, the landlord said roller, you have a wave wheel, speechless.

In washing bai single large clothing, especially with water.

When the sweater or underwear with a large amount of DU does not spin off, it is the eccentric protection function of the drum washing machine. The eccentricity protection feature is a feature that all front-loading washing machines have. If the clothes are unevenly distributed, the washing machine will shake and distribute the clothes again, and then spin them off when the clothes are evenly distributed. If the laundry is not evenly distributed, it will cause the washing machine to vibrate and shift, and it will damage the washing machine or other items around the washing machine.

When there are fewer clothes, due to eccentric protection, the washing machine may not be spun dry, and some clothes can be added to make the clothes evenly distributed, and then spin drying; In addition, the washing machine will cause the drying time to be extended due to the re-shaking and distribution of the clothes, which is a normal phenomenon set by the program, so please feel free to use it.

Dehydration is a separate program, is often drainage, after the drainage is completed, the water level sensor to the computer letter number, the computer controls the capacitor machine to rotate at high speed to dry, which has two protection switches, one is the anti-collision barrel protection, and the other is the upper cover closure protection. There is also a clutch in the mechanics-related part. If it can't be shaken dry, check from the above parts, and finally suspect that the computer version is not normal.

1. The door switch is not in good contact or there is carbon deposition on the contact, which causes poor conduction.

2. The connection line between the door switch and the computer board is broken or the motherboard is faulty. If it is invalid, disassemble the upper cover and short-circuit the two wires of the door switch, and test the machine if the normal problem is in (1); A slight improvement or scratching of the contacts will solve the problem. If it is not normal, the problem is in (2), the connection between the detection switch and the motherboard or the motherboard is faulty.

The general problem mostly occurs in (1).

3. It is also possible that the belt is loose. Because dehydration requires high speed, the belt slips as soon as it is loosened. Maybe you can tighten it yourself.

4. Finally, it is recommended to find a professional home appliance maintenance personnel for testing.

Just look at the washing machine instruction manual, a piece of clothing may be too light.

The reasons why the drum does not rotate when the washing machine is dehydrated and the motor has a sound and how to deal with it:

1. First of all, the capacitor is most likely to have problems, followed by the motor. Check if the capacitor and motor are working properly.

2. Secondly, check whether the brake of the dryer is correct, and whether the brake has a spring or not.

3. Open the back cover to check whether the brake line is broken and whether the brake is locked.

4. The belt is aging and loose, and the potato brigade is slippery, which will also cause it to not rotate.

5. Check if the computer board is working properly.

Haier prodigy automatic wave wheel washing machine for single dehydration method:

Option to carry out a separate dehydration procedure "dehydration only" (single dehydration);

Stack the laundry evenly around the inner circumference of the spin bucket and gently press it by hand;

Cover the safety inner lid and the lid of the dehydration bucket, press the start pause button of the washing machine, and start the washing machine.