How to set the time of the automatic dot connector?

You can ** the latest, software, and then I remember that the settings page has a second ten times or something, this can be roughly set, and then the time inside can also be set according to the requirements, as long as you know one second, it is equal to 1000 milliseconds, on the line.

Part 1: How to set the mouse click position?

1. Mouse coordinate positioning: Open the interface of the automatic mouse linker of the mouse and select"Mouse commands"drop-down button"Move the mouse", and then drag the red crosshair with the mouse to define the mouse click position or press the entry mouse shortcut key [CTRL+X] key combination (the shortcut key can be changed to your own handy shortcut key according to your preference, including numbers, letters, etc.).

2. If the user wants to add a new mouse click position before a defined location, click this position in the mouse click position list, and then follow the steps to pass"Insert"button to successfully add a new location for mouse clicks. In the list of locations, use the key to move to keep track of the mouse position added by the test.

2. How to set the mouse click interval.

Found on the main interface of the Dot-Ticker Mouse Auto-Linker"System settings"to enter a new small window, where the top row is"Instruction interval"You can enter the time interval of the mouse click, and the unit of the time interval may be adjusted to microseconds, that is, the smaller the time interval, the faster the mouse click.

3. How to set the mouse cycle click.

In the main interface, we have one of the mouse commands"Repeat (previous instruction)."If the subsequent mouse clicks are the same as the previous operation, we can select this mouse click command, and set as many times as there are cycle clicks until the cycle operation is completed. We can get through"Start the execution"to verify.

4. How to set the time when the mouse runs ends and the next mouse run starts?

We have one of these mouse commands in the main interface"Time delay"operation, you can set the delay time below, generally in seconds, of course, you can also set the decimal point to the second (that is, the number in milliseconds).

this"Time delay"The function can be set to stop clicking after a certain number of seconds and start clicking again a few seconds after stopping clicking.

5. How to set the shortcut keys of the mouse function.

Found in the main interface"System settings"After clicking into a small window, you can see that there are three function shortcuts: start execution shortcut, stop execution shortcut, and enter coordinate shortcuts, which can be changed to your favorite shortcuts (including numbers, letters, spaces, tabs, shif, etc.) in the corresponding small box.

Tablet solution: Take the Android tablet as an example, you only need to open the "Settings" option, enter the "Wireless and Network" under the project, and then click to enter the "WiFi Settings", then press the Menu key to bring up the "Advanced" option, fill in the IP address of the network segment in the "IP address", and the tablet can access the network normally after refreshing. Note:

Generally speaking, entering the "IP address" field may solve the problem, but it is also possible that the router uses a special IP address, so the best way is to log in to the router to check the specific network segment. 2 Router solution: Every time you need to fill in the annoying IP address on the tablet, it is not a safe way after all, and the best way is to modify the router settings.

Enter it in the browser or apply it to most routers, please refer to the manual for individual cases), a login dialog box will pop up, and you can log in by entering the password. Note that the password can be found in the manual, or directly in the search engine by the router model as the keyword. After successfully logging in, find the DHCP option, tick the Enable DHCP service, and set the DHCP allocation range.

Go back to the tablet, unfix the IP setting, refresh the wireless network card, and successfully obtain the IP address after a few seconds. If the tablet can't get the IP address automatically, you need to enter it manually Enter the IP address and password of the wireless router on the web browser to log in All failures disappear after turning on the DHCP service Can go to QQ can not access the Internet, DNS error error A tablet computer connected to the wireless network can get the IP address from the wireless router normally, but it is found that all kinds of network applications are very slow to open when surfing the Internet, but QQ is used normally. This type of situation is more common, and DNS errors are most likely.

Don't be in a hurry to do it after understanding the problem, it's best to call ** to ISP customer service first, ask for the accurate DNS address, and then use the methods mentioned above to log in to the router, usually under the "WAN option" you can find the main and secondary DNS setting options, enter the new DNS we got from the ISP customer service, flash the wireless network card of the tablet, and it can be used normally. Set the exact DNS server address in the router.

Hello dear! <>

<> Although auto-connectors can be useful in certain situations, they are generally considered unethical and may result in you being banned or banned from using certain applications or **. The use of the auto-linker may violate the usage of certain ** or applications, which may result in the suspension or permanent ban of your account. In addition, the auto-dot connector may cause your device to become infected with viruses or malware that could compromise your privacy and security.

Therefore, I suggest that you do not use an automatic dot connector, but do what you need manually. This is not only more secure, but also more reliable, protecting your account and device from potential threats.

Summary. Hello dear! Glad to serve you! <>

A: No, the use of the auto-linker is a violation of the rules of use of the game or software and may be considered cheating. Depending on the rules of the software or game, the use of the auto-linker may result in account bans or restricted access.

Therefore, we recommend that users do not use auto-dot connectors to avoid unnecessary trouble to themselves.

Can I use an automatic dot connector?

Hello dear! It's a pleasure to serve you! <>

A: No, the use of the auto-dot connector is a violation of the rules of the game or software and may be considered cheating. Depending on the rules of the software or game, the use of the auto-linker may result in account bans or restricted access.

Therefore, we recommend that users do not use the automatic dot connector, so as not to cause unnecessary trouble to themselves.

My husband has a history of online gambling, and has been afraid that he will gamble again, and today I saw an automatic clicker on my mobile phone, will it be related to those online gambling?

Hello! Generally unrelated. An auto clicker is a type of software whose main function is to automatically click on a specified location on a computer screen, which is equivalent to pressing the left mouse button to perform a click operation.

This kind of software is usually used to facilitate users to perform repetitive operations, such as farming experience in games, farming coins, etc. If your husband has an auto-clicker installed on his phone, it may be because he needs to do this. However, the auto-clicker itself is not a software related to network blocking, just a grinding aid.

If you are concerned about your husband's internet blockage, you can talk to him openly and seek support from family members and a psychologist to help him get out of the shadows. At the same time, you can help him get through the storm by supervising internet use, planning daily routines, and encouraging healthy forms of entertainment.

Hello dear, an auto-dot connector is a piece of software that is usually used to simulate repetitive mouse clicks quickly. In some specific scenarios, such as simulating automated tasks, game plug-ins, etc., an automatic dot connector tool may be used. However, it is necessary to pay attention to a few points under the first beam:

1.The Auto Connector tool may violate the rules of use of some software or games, so it is important to understand the relevant regulations before using them and follow the corresponding rules of use to avoid improper use that is considered cheating. 2.

The automatic dot connector tool may have an impact on computer security, so it is necessary to ensure that the automatic dot connector tool used is safe and reliable, and avoid using unsolicited software to avoid the risk of computer being infected by malware or suffering from information leakage. 3.It is recommended to understand the relevant use risks and precautions before using the automatic dot connector tool for a long time to protect your device and data security.

Therefore, it is recommended that you use the auto-dot connector tool with caution and understand the relevant usage regulations and precautions.

We have developed a hardware-only automatic mouse click, no macro driver, plug and play:

The middle mouse button is a switch, press it once to turn it on, and then press it again, the speed can be adjusted by itself, the fastest speed of connecting the dots in the two modes is 40 times per second, and the slowest connecting speed is the second time. Hope it helps!