Questions about your computer s power supply? Computer power problems?

Updated on number 2024-04-05
14 answers
  1. Anonymous users2024-02-07

    It won't be much, and there is basically no difference in electricity consumption between the two.

    It's just that the maximum output power of 400W is more than that of 300W, will an adult do more work than a child to move a brick?

    If you only move one piece, there is no difference between adults and children, that is, 300 and 400 are the same.

  2. Anonymous users2024-02-06

    1. The power consumption of A and B computers is the same, and the power consumption refers to the size of the load under the power supply, which has nothing to do with the power of the power supply itself.

    2. The unit of power supply is not voltage but power, which refers to the power supply capacity that the power supply can provide.

  3. Anonymous users2024-02-05

    The power consumption of the two computers is the same, the voltage of the power supply refers to the working voltage of the power supply, the computer consumes 246 watts, then the power supply will only provide 246 watts of power, not 400 watts. 400 refers to the maximum amount of power that a power supply can provide when it is working properly.

  4. Anonymous users2024-02-04

    It should be the power consumption point of computer B, because the power will be greater than that of A when designed.

  5. Anonymous users2024-02-03

    When you say 300W or 400W, you mean the actual maximum output power, which is the sum of the maximum power of all accessories in the computer.

    You now have a total power of 246W after being tested by 360, so a 300W power supply is sufficient. There is a difference between the maximum output power of the 300W power supply and the 400W power supply, and there is almost no difference in the power consumption of the power supply itself.

    The power supply voltage is generally AC 220V (that is, ordinary civil electricity). If the voltage in your area is unstable, it is recommended to buy a wide voltage version of the power supply.

  6. Anonymous users2024-02-02

    1. You have to find out how you bought this power supply, which is the original from Japan? I still bought it and imported it from Japan.

    2. If you buy the original from Japan, then congratulations, a small number of commercial appliances or military power supplies in Japan use NATO DC 110V, while ordinary residents use AC 100V to 200V electricity, while China uses the Warsaw Pact standard AC 220V, and any kind of electrical appliances in Japan cannot be used in China!

    3. If it is imported from Japan, the general manufacturer will change the power supply from DC 110V or AC 100V to AC 220V during production, which can be used in China.

    4. What is written on your power supply is "100VAC", which means AC voltage 100V, and if it is DC, it should be "DC". Congratulations, you have found a transformer handle and changed the power supply voltage.

  7. Anonymous users2024-02-01

    You can try it, use it if you can, and throw it away if you can't.

  8. Anonymous users2024-01-31

    China uses a voltage of 220V, and Japan's voltage should be 100V. Get this straight. Then decide if it can be used.

  9. Anonymous users2024-01-30

    How did I see Made in China, how did I become Japanese?

    The above manual indicates that the input voltage is AC 100V, and the domestic mains voltage is AC 220V, the voltage level is different, and the difference is too much, and it is old, it is best not to use it.

  10. Anonymous users2024-01-29

    It can be used, but there is no 100V AC here, so it is necessary to configure a transformer and turn 220V into 100V to use. Otherwise, it is easy to burn this power supply.

  11. Anonymous users2024-01-28

    Only works with 100V power supply, what should you do? It's not cost-effective to bother with remodeling.

  12. Anonymous users2024-01-27

    As long as there is no fault, it can be used continuously, and the rated 450W belongs to the general power supply. For example, i5 10400F + GTX1660S graphics card.

  13. Anonymous users2024-01-26

    1All can be VP350P 12V output 336W, 12V output is to power the CPU and graphics card, that is to say, the CPU graphics card does not exceed 336, it is no problem, 560Ti core is 170W, theoretically as long as you have the CPU does not exceed 160, the general low-power CPU 70W, the mainstream 110W.

    There are 2 problems though:

    The minimum requirement for the system is 500W overall, so your overall power is insufficient.

    2.The input voltage range of Antik VP350 is 220V 240V (that is, only 350W in this range), although our mains power is provided by 220V, but it is generally impossible to stabilize the input of 220V, which has a large range, especially the peak power consumption. So with VP350 you have to be equipped with a voltage regulator, that's why it's cheap; Otherwise, the power output of this power supply is extremely unstable.

    Therefore, you need to choose a power supply with a core output of more than 500W, which neither refers to the rated power nor the peak power, but refers to the 12V output power. And you need to choose a power supply with a wide voltage input (100V 240V input), otherwise add a voltage regulator. Other than that, you can only change the graphics card.

  14. Anonymous users2024-01-25

    Not enough, rated 500W recommended TT KK600 strong version.

Related questions
26 answers2024-04-05

You use Xingu's power supply, this kind of power supply is known to the insiders, it is a second-line power supply, there is no peak, only the rated power, you want a rated 300W, very stable! I pretend to be all Xingu's for my friends! >>>More

16 answers2024-04-05

1.Your two sockets are the same size and the current is 10A2"Since the plug of the water heater is larger than average, the regular socket does not work, so I bought a conversion plug. >>>More

12 answers2024-04-05

If the economy allows, the chassis is made of thick plates, and the air duct is well designed, such as the Destroyer of Cooler Master, about 280, if the budget is tight, choose a 100 or so to look at it, just buy an empty box, don't use the chassis with its own power supply, you can't configure a miscellaneous power supply, the power supply power is best rated at 400W, 300 full load is not good, I personally don't recommend using the Great Wall, I feel that this brand is cheap, rely on low prices to occupy the low-end market, your 4850 is not a fuel-efficient lamp, use some power supply, Generally use Huntkey's DH6, domestic production is okay, the pursuit of better use Haiyun, the performance is not said, it is expensive, TT power supply is good in high-power power supply. The power supply of this power is very average.

8 answers2024-04-05

The specifications of the power supply are usually 300W (rated power) 400W (maximum power), which means that the power supply does not usually use the maximum power. >>>More

28 answers2024-04-05

Based on what you said, I think the fault is with the lines that supply power to the charger and inverter1;Your voltage is measured at no load, that is, when charging the electrical appliance, whether the voltage is 2;Have you tried whether the inverter can work properly at home (with 220 rpm 12V transformer + inverter + PDA charger + electrical appliances). >>>More