How do you quickly remove dirt from an electric kettle?

Tea sets, electric kettles, etc., which have not been used for a long time or have been used for a long time, are full of stains on the outside, and there is a lot of scale on the inside, which directly causes harm to human health, and is extremely unhygienic and beautiful. How do you get rid of its stains quickly? The results should be quick and immediate.

Today, lark 666999 share with you a simple, efficient and fast decontamination method. Prepare a cleaning ball, a tea bowl, a small loofah, a rag, 10 grams of dish soap, 5 eggs to leave an empty shell, 10 grams of Shanxi old vinegar, and 4 pieces of baking soda.

Method 1. Clean stains from the outer surface. Dip a loofah in a little dish soap to wipe the stains on the outside, and then dry with a rag.

Then wipe slowly with a cleaning ball dipped in dish soap, wipe a few more times in the place with more stains, after wiping, the stains are significantly less, and then wipe until it is shiny, and then wipe it dry with a rag.

Then wipe the gummy part of the handle with a cleaning ball dipped in dish soap, wipe it, and then dry it with a rag, you see, the outside is clean and shiny.

Method two. Clean up the dirt and limescale inside, open the eggs, pour out the egg liquid, and use only the empty egg shells.

Tear the empty egg shell into small pieces by hand, put it inside, add half a pot of water, and shake it from side to side, not up and down to avoid splashing out. After 10 minutes, pour out all the water and rinse it with clean water, if there are still stains, use the following method.

Clean up the dirt inside 2Use Shanxi old vinegar or white vinegar. Pour 10 grams of Shanxi old vinegar into the pot, add less than half a bowl of water, shake it left and right for 5 minutes, and wipe the bottom with a loofah. Pour out after 2 minutes and rinse with water 2 more times. After boiling water, drink the second pot.

Clean up the dirt inside 3Put 4 pieces of baking soda in a tea bowl, add 10g of water and form a paste.

Then dip the loofah in soda water, wipe the inner wall and bottom of the pot, and wipe for 5 minutes. At this time, the dirt inside the kettle is completely removed. Finally, add water and rinse 3 times, you can boil water, the first pot of water can not be drunk, and another pot can be drunk.

The exterior and interior are cleaned up, and the dirt should be cleaned regularly in the future, pay attention to hygiene, and drink healthy.

Teach you how to quickly remove limescale from an electric kettle.

Because of its convenient and fast use, the electric kettle has gradually been loved by consumers and has become one of the important electrical appliances in home life. However, electric kettles that have been used for a long time will have the problem of scale, and it is imperative to remove limescale for the health of your family. Today, I have sorted out a few small ways to remove limescale for you, so let's learn it quickly.

One: Citric acid removes scale.

After using the electric kettle for a period of time, if you find that the scale is more serious, you can put some citric acid into the kettle, add half the capacity of water, and then boil it and pour it out. Lemon not only removes limescale, but also leaves a fragrant lemon flavor, which is really a double win.

Two: vinegar to remove scale.

This method is simple and practical, the main component of scale is calcium carbonate and other carbonates, the acetic acid in the vinegar will react with it, producing minerals and carbon dioxide gas dissolved in water, white vinegar can be bought in general supermarkets, put 10% of the scale of the kettle white vinegar, and then fill it with water, boil it for about an hour, and then brush it, aged vinegar can also be, but the effect of aged vinegar is not as good as white vinegar.

Three: Baking soda to remove limescale.

Generally, the heating plate of the electric kettle is made of aluminum, when the electric kettle boils water, it is easy to form scale, generally we can put 1 teaspoon of baking soda, boil for a few minutes, and the scale will be removed. Or you can pour about 500 grams of baking soda with a concentration of 1%, shake it gently, and the scale can be removed.

Four: boil the potato in the electric kettle to remove the dirt.

In the dust of the socks of the new electric kettle, put more than half a kettle of potatoes, fill with water, cook the potatoes, and then boil the water later, so that there will be no limescale. However, it should be noted that after boiling the potato, the inner wall should not be scrubbed, otherwise it will lose its descaling effect. For the old kettle that has been full of limescale, after boiling it once or twice with the above method, not only the original scale will gradually fall off, but also can play a role in preventing the accumulation of scale.

Five: magnet to remove scale.

Putting a magnet in the pot can not only prevent dirt, but also magnetize the boiling water, which has the effect of preventing constipation and pharyngitis.

Six: boiled eggs to remove scale.

Boiling eggs to remove limescale can also have unexpected effects. Specific method: Slightly break the two egg shells into the bottle, then fill half a pot of water, stir with a spoon, then boil and leave for about half an hour, pour out the eggshells, and rinse twice with water.

Electric kettle as a commonly used item in our life, because of its convenient and fast characteristics, plays an indispensable role in our life, although the electric kettle is very convenient, but the electric kettle scale is not so beautiful.

Electric kettle limescale removal method.

1. Lemon scale removal. Put the lemon slices into the kettle, boil the water for about 5 minutes, and let the lemon soak in water for 2 minutes after boiling.

2. Vinegar to remove scale. If the kettle has scale, you can put a few spoonfuls of vinegar into the water and boil for an hour or two to remove the scale. If the main ingredient in the scale is calcium sulfate, the soda ash solution can be poured into the kettle and boiled to remove the scale.

3. Ion exchange scale removal method. By using a specific cation exchange resin to replace calcium and magnesium ions in the water with sodium ions, the solubility of sodium salts is high, so the formation of limescale due to the increase in temperature is avoided.

4. Membrane separation and scale removal. Both nanofiltration membranes and reverse osmosis membranes can intercept calcium and magnesium ions in water, thereby fundamentally reducing the hardness of water. The characteristics of the membrane separation and scale removal method are that the effect is obvious and stable, and the treated water has a wide range of applications; However, there are high requirements for inlet pressure, and equipment investment and operating costs are high.

Limescale formation process.

At high temperatures, calcium sulfate containing slightly soluble in water will be precipitated due to the evaporation of water, and the carbonate in the water will combine with calcium and magnesium ions to form calcium carbonate and magnesium carbonate that are insoluble in water, that is, water alkali. With the continuous evaporation and concentration of water, the water alkali content continues to increase, and scale is formed after reaching saturation.

The hazards of limescale.

1. The thermal conductivity of scale is very poor, which will lead to the deterioration of heat transfer on the heating surface, thus wasting fuel or electricity.

2. If the scale adheres to the heating surface of the thermal equipment, it will endanger the safe and economical operation of the thermal equipment. Because the thermal conductivity of limescale is very poor, it hinders heat transfer. The heat absorbed by the furnace tube from the flame side cannot be well transferred to the water, and the cooling of the furnace tube is affected, so that the wall temperature rises, causing the furnace tube to bulge and cause a burst pipe.

The way to remove limescale from the electric kettle is: clean with vinegar water, clean with citric acid, etc

1. Use vinegar water to clean.

Vinegar water is a very useful cleaner that can easily remove limescale from the inside of an electric kettle. First, pour out the water in the kettle, then mix the vinegar and water in a ratio of 1:1, pour the dregs into the kettle, and heat until boiling.

After waiting for 5-10 minutes, pour off the vinegar and rinse with water. If the scale is severe, you can repeat the above steps several times.

2. Use citric acid to clean.

Citric acid is a natural acidic substance that effectively removes limescale from the inside of electric kettles. Mix the citric acid with the water in a ratio of 1:3, pour into an electric kettle, and heat until boiling.

After waiting for 5-10 minutes, pour out the citric acid water and rinse it with water. Again, if the scale is severe, you can repeat the above steps several times. Blind and blind.

Electric kettles have the cause of limescale

The main components of scale are metal ions such as calcium and magnesium, which are buried in water with a high content, so they are easy to deposit and form scale inside the electric kettle. The content of these metal ions is related to the water source, and the water quality in different regions is different, and the water in some areas contains more metal ions, which is easy to form scale.

If we don't clean the kettle in time, it is easy to limescale. Because the water stored inside the kettle for a long time will evaporate, the evaporated scale will remain in the kettle. If we don't clean it in time, these limescale will become more and more, and in serious cases, it will also affect the service life of the electric kettle.