How to resolve the VMware This virtual machine appears to be in use issue

An internal error occurs when VMware opens a virtual machine because the service corresponding to the virtual machine is not automatically turned on.

Take Win10 system and VMware15 as an example, the specific operation steps are as follows:

1. Press and hold the Windows logo key R to open Run.

2. Enter cmd in the run and call the command prompt.

3. In the command prompt window, enter taskmgr to invoke Task Manager.

4. In the toolbar of Task Manager, find the service column and click it.

5. Click on the name to sort it by name.

6. Scroll down to find the part with the initial letter V (the red box).

7. In this section, find the description of VMware-related services (red boxed section).

8. If you find that a service has been stopped, right-click on the service and click Start.

9. Now turn on the VM, and you can turn on the virtual machine normally.

There are times when you use an open VMware virtual machine and you encounter an "internal error" situation. This situation is usually caused by the VMware service stopping, basically just start the VMware service and it will be solved.

1. Please open the running window (press the keyboard (win+r), and then enter the command "cmd", so that you can bring up the DOS command line interface, <>

2. Please enter the command in the command line interface and press the enter key to confirm. Once the command is successfully executed, the service interface will appear.

3. On the service interface, please scroll down the bar, and near the position below, you can see all the services about VMware. At this time, several VMware services are not running.

4. Please select these unstarted services in turn, start them all to make them run normally, and then return to the VMware interface to turn on the virtual machine after the service is successfully started.

VMware virtual machine must be familiar to everyone, but there are Win7 system users running VMware, but it prompts "the virtual machine seems to be in use", resulting in unusable, how to deal with it, and then explain to you the solution of Win7 system running VMware prompt "The virtual machine seems to be in use".

The specific steps to solve the problem are as follows:

Step 1: As shown in the figure, we can see that the virtual hidden front chain machine that we want to open now has this problem, whether you click "Get Ownership" or click Cancel, the virtual machine cannot be opened;

Step 2: Here we first need to confirm that the virtual machine is closed, if the virtual machine is not closed, we click closed;

Step 6: We can see that the virtual machine that we couldn't turn on can be restarted.

About win7 system running vmware prompt "the virtual machine seems to be in use" how to solve the problem will be introduced to you here, I hope the above tutorial content can help you.

When using VMware VMs, you may find that when you open the VM, you will find that the message "This VM appears to be in use." If the virtual machine is not in use, press the "Take Ownership (T)" button to take ownership of it. Otherwise, press the "Cancel (c)" button to prevent damage.

Profile: D: Win10x64 Windows 10.

This is caused by the virtual machine not shutting down gracefully, let's take a look at the solution.

First click on the "Gain Ownership (T)" button, you will find a pop-up window that says "Unable to open virtual machine: D: Win10x64 Windows 10 failed to take ownership of this virtual machine.

The virtual machine is being used by an application on the host. Profile: d:

win10x64\windows 10 。and so on. This indicates that the acquisition of ownership has failed.

When clicking on the "Cancel (c)" button is to exit the window directly, nothing pops up. At this time, I found that no matter which button was clicked, it would not solve the problem.

Click on the Start menu and select File Explorer.

After opening "File Explorer", enter the location where the virtual disk files and configuration files of this VMware virtual machine are stored (that is, the path on the pop-up prompt), here in the directory D: Win10x64, and find the suffix as. lck folder.

Then, suffix as: LCK folder deletion, or to avoid deletion mistakes can be moved to the backup folder, or you can directly rename this folder, here the folder Windows 10 to Windows 10.

Then reopen the virtual machine and find that the virtual machine can be opened normally, which successfully solves the problem of "this virtual machine seems to be in use".

First of all, your virtual machine is installed, the image is also there, the registration code is also lost, how can there be an error, listen carefully, the reason for the error prompt here is that your VM service has not started, open the task manager, the 5 services about the VM have been stopped, this can be set to start automatically at boot, or you can right-click "Start", all become "running".

Go and run the virtual machine again, and the "internal error" prompt is gone

VMware Workstation VM, when it is opened, an internal error is displayed, which is usually caused by the VMware Authorization Service service not starting!

Open the host control panel - Management Tools - Services, find the VMware Authorization Service service, set its startup type to automatic, and then run the service!

If you can't find this service, please reinstall the virtual machine software, please close the 360 security software before installing the software, this kind of software will prevent the normal program from installing the driver file and writing the system service, and at the same time use less of this software to optimize the system service!

When using VMware VMs, you may find that when you open the VM, you will find that the message "This VM appears to be in use." If the virtual machine is not in use, press the "Take Ownership (T)" button to take ownership of it. Otherwise, press the "Cancel (c)" button to prevent damage.

Profile: D: Win10x64 Windows 10.

This is caused by the virtual machine not shutting down gracefully, let's take a look at the solution.

First click on the "Gain Ownership (T)" button, you will find a pop-up window that says "Unable to open virtual machine: D: Win10x64 Windows 10 failed to take ownership of this virtual machine.

The virtual machine is being used by an application on the host. Profile: d:

win10x64\windows 10 。and so on. This indicates that the acquisition of ownership has failed.

When clicking on the "Cancel (c)" button is to exit the window directly, nothing pops up. At this time, I found that no matter which button was clicked, it would not solve the problem.

Click on the Start menu and select File Explorer.

After opening "File Explorer", enter the location where the virtual disk files and configuration files of this VMware virtual machine are stored (that is, the path on the pop-up prompt), here in the directory D: Win10x64, and find the suffix as. lck folder.

Then, suffix as: LCK folder deletion, or to avoid deletion mistakes can be moved to the backup folder, or you can directly rename this folder, here the folder Windows 10 to Windows 10.

Then reopen the virtual machine and find that the virtual machine can be opened normally, which successfully solves the problem of "this virtual machine seems to be in use".

Method steps.

We first click on the "Get Ownership (T)" button and we will find a pop-up window that says ".

Unable to open virtual machine: D: Win10x64 Windows 10 failed to take ownership of the virtual machine.

The virtual machine is being used by an application on the host. Profile: d:

win10x64\windows 10 。”

and so on. This indicates that the acquisition of ownership has failed.

When clicking on the "Cancel (c)" button is to exit the window directly, nothing pops up. At this time, I found that no matter which button was clicked, it would not solve the problem.

Click on the Start menu and select File Explorer.

After opening "File Explorer", enter the location where the virtual disk files and configuration files of this VMware virtual machine are stored (that is, the path on the pop-up prompt), here in the directory D: Win10x64, and find the suffix as. lck folder.

Then, suffix as: LCK folder deletion, or to avoid deletion mistakes can be moved to the backup folder, or you can directly rename this folder, here I changed the folder Windows 10 to Windows 10.

Then reopen the virtual machine and find that the virtual machine can be opened normally, which successfully solves the problem of "this virtual machine seems to be in use".

Workaround:

1. First click the "Get Ownership (T)" button, you will find a pop-up window showing "Unable to open virtual machine: D: Win10x64 Windows 10 failed to get ownership of the virtual machine.

The virtual machine is being used by an application on the host. Profile: d:

win10x64\windows 10 。and so on. This indicates that the acquisition of ownership has failed.

2. When you click the "Cancel (C)" button, you will exit the window directly, and nothing will pop up. At this time, I found that no matter which button was clicked, it would not solve the problem.

3. Open "File Explorer" and enter the location where the virtual disk files and configuration files of this VMware virtual machine are stored (that is, the path on the pop-up prompt window), here in the directory D: Win10x64, find the suffix as. lck folder.

4. Then, suffix as: LCK folder deletion, or to avoid deletion mistakes can be moved to the backup folder, or you can directly rename this folder, here I changed the folder Windows 10 to Windows 10.

5. Then reopen the virtual machine and find that the virtual machine can be opened normally, which successfully solves the problem of "the virtual machine seems to be in use".

We first click on the "Get Ownership (T)" button and we will find a pop-up window that says ".

Unable to open virtual machine: D: Win10x64 Windows 10 failed to take ownership of the virtual machine.

The virtual machine is being used by an application on the host. Profile: d:

win10x64\windows 10 。”

and so on. This indicates that the acquisition of ownership has failed.

When clicking on the "Cancel (c)" button is to exit the window directly, nothing pops up. At this time, I found that no matter which button was clicked, it would not solve the problem.

Click on the Start menu and select File Explorer.

After opening "File Explorer", enter the location where the virtual disk files and configuration files of this VMware virtual machine are stored (that is, the path on the pop-up prompt), here in the directory D: Win10x64, and find the suffix as. lck folder.

Then, suffix as: LCK folder deletion, or to avoid deletion mistakes can be moved to the backup folder, or you can directly rename this folder, here I changed the folder Windows 10 to Windows 10.

Then reopen the virtual machine and find that the virtual machine can be opened normally, which successfully solves the problem of "this virtual machine seems to be in use".

Go to the directory where the virtual machine is saved and delete it. lock the folder at the end of the folder.