What to do if the hard drive or software changes when the computer is turned on

Follow its prompts to install the sprinkle.

Linked Digital-Follow-Post)--Turn around and hang the lantern high, the red silk is tied with the crown of ink hair, the idle song husband asks the woman to answer, and the vcwnw6oug sends support.

The best answer to the best cherry blossom slippery.

This is due to the fact that there is no driver for the drive, you can install the driver from the Internet**, or you can search for "driver**" on the Internet, or you can contact your computer manufacturer to get the driver.

The second method:

2.Find "Drives" in "Device Manager" and click on "Drive Spine Processor".

3.Find "Drives" in "Drives", right-click on "Drives", and select "Update Driver Envy".

5.Click "Install" and follow the prompts to complete the installation.

The third method:

2.Find "Drives" in "Device Manager" and tap "Drives".

3.Find "Drive" in "Drive", right-click on "Drive" and select "Update Driver".

4.Click on "Browse My Computer".

5.Select the directory where the driver is located and click OK.

6.Click "Install" and follow the prompts to complete the installation.

Other answers: It may be a problem with the hard drive, you can try another hard drive, if the change of hard drive still can't solve the problem, you can contact.

This kind of problem generally has no computer maintenance foundation or don't move.,Answer: Eliminate the big scum system maintenance of the computer system disk, that is, the files required by the C disk. Let's quietly redo the system.

Reasons and solutions for computer not turning on:

Step 1: First of all, according to the specific situation analysis, if there is no power response directly, then check whether there is a power supply, poor contact, hardware and other problems, go to the second step, if it is not possible to enter the system may be operating system or software problems to go to the third step.

Step 2: Check whether there is a power supply problem, first see if the power supply is not plugged in well or there is a problem with the plug, if you are using a battery, then plug it in and try again. You can go to a friend or go to a computer repair shop or sales store to find the same model of power supply to try it.

After replugging the power supply, press the power button again, and if it still can't be turned on, then press it for a while. If you change someone else's power supply to turn on, it means that there is a problem with the power supply, if it proves that there is no problem with the power supply, it may be the hardware reason, go to the fifth step.

Step 3: Go to the last correct configuration to adjust, turn on and press and hold F8, enter the advanced options page, select "The most recent correct configuration", and press Enter. If it can enter the system, it may be caused by viruses, incompatible hardware drivers with the system, or operating systems.

After entering the system, run the anti-virus software, check and kill the virus, if there is a virus, restart the computer after the anti-virus, if it is not normal, it may be caused by the incompatibility of the device driver and the program, delete the graphics card, network card and other drivers, restart it after removing the driver, if there is still a problem, then go to the next step.

Step 4: Repair and install or reinstall the system, set "Optical Drive as the first boot device" in the BIOS, then insert the system disk, and press the R button to perform "Repair and Installation". If the fault persists, just at the beginning of the system, select "One-click GOST to restore the system" or use the system disk to reinstall the system.

Step 5: Check whether there is a hardware problem, disassemble the notebook to see if the hardware is loose, generally the hardware is not plugged in well, there will be an alarm sound, the long sound continues to sound that the memory module is not plugged in tightly, one long and one short means that the memory or motherboard has a problem, one long and two short means that the graphics card is wrong. If there is too much dust inside the notebook, it is best to clean it up first.

In addition, pay attention to whether it is caused by the new hardware, if it is normal before the replacement of the hardware, and it is not normal after the replacement, then check whether it is compatible. If it can't be started at this time, it is best to send it for repair, and the professional will check whether there is a problem with the hardware one by one.