Why is the console so loud when my computer is turned on?

1.See if the fan is too dirty, or loose or something, the fan is a problem;

2.See if there's something wrong with your motherboard;

3.See if the memory is plugged in;

4.Or the computer is poisoned and makes the CPU too high, that's all ! ~

Winter is more severe, mine is the same, when the weather is cold, it will be called as soon as it is turned on, and after a while it will not be called.

This question puts you in the Start menu"Settings""Control Panel"Inside"Audio equipment"Adjust it and you're good to go.

Check whether the fan of the power supply, radiator, and graphics card is too dirty, clean up some lubricating oil, and really can't remove it, and go to the electronics mall to change the fan of the same size!

The electric fan is running out of oil. The lube inside is dry.

Remove the electric fan, uncover the sticker inside, don't remove it completely, just half of it, and then point a drop of sewing oil inside, not too much, otherwise it's not good, and then cover the self-adhesive paper and install the fan, it should be much better. In addition, it can also clean the dust on the heatsink at the same time. It's better.

If there is a problem with the power supply fan, you can also add some oil to the old fan to see if it can be solved, if it doesn't work, you can try a new one

Fan Lack of Oil Disassemble the case and find which fan is causing the noise.

Remove the fan, then remove the logo on the back of the fan, drop a drop of sewing oil or car oil, and then glue the top of the fan.

It may be the sound of a power fan or a CPU fan, just add a little lubrication. If it is something else, it is recommended to go to the repair place.

Fan problems are dusted or the fan is loose.

It's the same with my machine, it's totally fine to change the fan.

Check if the sound is coming from? The fan should be changed to the fan, and the power supply should be changed to the power supply!!

It must have been cold. Lack of lubrication anymore.

When the desktop computer is turned on, the host is loud because the CPU temperature is high, and the radiator is too dusty to run.

Solution: Clean the dust from the radiator.

The detailed operation steps are as follows:

Prepare the tool: a screwdriver.

Brushes, hair dryers.

1. First of all, prepare the gadget. There are brushes (if you don't have one, you can use a discarded toothbrush), a screwdriver, and a hair dryer, as shown in the image below.

2. Second, unplug all wires from the main chassis. Generally speaking, you can't turn the screws at will to open the main unit, and the main chassis usually has several main screws. In this example, you only need to rotate 2 screws by hand to remove the main cover (usually the side with cooling holes) is required, as shown in the figure below.

3. Then, after opening the main chassis, turn the radiator (i.e., the small electric fan) in the same direction (left).

A few fixing screws next to it (usually loose left and tight right), then you can remove the small electric fan with appropriate force, and remove the wires from the small electric fan, as shown in the figure below.

4. Then, there is a lot of dust in this small electric fan, which is one of the reasons why it is very loud. Once you have completed the above steps, attach the radiator to the small electric fan by hand and remove it as shown in the image below.

5. Subsequently, after completing the above steps, use a brush to clean the dust on the small fan radiator, and then use a hair dryer to blow air (preferably hot air.

maximum wind speed) to clean the dust on the radiator as shown in the figure below.

6. Finally, remove the dust, be careful not to wash it with water. Do not wash anything that comes into contact with electricity, as this will cause problems as shown in the image below. After cleaning, you can install the small fan back according to the original steps, so that there will be no loud sound when the machine is turned on.