Is it good for exterior wall insulation workers to brush with water?

Exterior wall insulation workers can use water brushes, of course, exterior wall insulation is generally done in this way, in addition, you can also use paint, as long as the insulation effect is good, you can see the material you choose.

You can use a brush to brush it without a problem, and it is normal for you to do a good job of waterproofing if you keep it warm, and then you can go in.

In the case of exterior wall insulation workers, this is of course possible to use water brushes, and water is used for insulation. This is okay.

It is not good for exterior wall insulation workers to brush with water, because it is easy to brush off the glue scraped on the outside if the insulation is brushed with water.

Is it good for exterior wall insulation workers to brush with water? There is nothing bad about brushing the exterior wall with water, as long as the exterior wall paint is good, it can be waterproof and insulated, and the thickness of the insulation wall panel is the most important thing that causes the warmth in the house. And the quality of the paint painted on the facades.

It is also the main place to pay attention to prevent the rain from becoming powdered after getting wet. Manually brush the wall with water, but the progress is slow, and the progress with machine spraying is fast.

Exterior wall insulation workers should also be able to use brushes, and this should be able to make it seem to be just added to the insulation, and it is not easy to dissipate heat, so it should also be easier to use.

In this case, there is no problem at all, and this operation meets his operating standards, so there will be no problems.

Exterior wall insulation workers should also be able to use brushes, although the insulation effect is not so good, but this should be more convenient and convenient, and know how to save money.

It is okay to brush the insulated exterior wall with water, but generally speaking, it is recommended that you do a little more, so that it is better.

I think it's not good to use a water brush for exterior wall insulation, and generally speaking, a roller brush is used, which is faster.

Exterior wall insulation constructor:

Material preparation: The machine active wall insulation material is prepared by the manufacturer to prepare the dry mix for on-site mixing, which should be transported to the site as needed, and there should be rainproof and moisture-proof measures. After the materials enter the site, the relevant personnel should be organized to report for inspection according to the regulations, and the on-site preparation of other auxiliary materials shall be subject to 30 days.

Preparation of construction equipment: mixers, ash hoppers, vertical transport tools, horizontal transport trolleys, etc. Commonly used plastering tools and plastering testing tools, pay-off tools, buckets, brooms, steel rulers, etc.

Process. 1.Clean up the base layer - set square, hanging vertical, elastic control line, punching, opening, re-inspection - wiping inorganic thermal insulation materials - elastic grid line, open grid groove, embedded drip groove, insulation layer acceptance - exterior wall coating.

Construction method. Clean the base wall: The base wall must be cleaned, and the wall must be free of oil stains, dust, dirt, release agent, weathering, mud and other dirt, and the surface flatness and verticality of the base wall shall not exceed 5mm.

If the base wall is too dry and the water absorption performance is too strong, it should be sprinkled with water to moisten it first. The cast-in-place concrete wall should be brushed in advance and sprayed.

Set square, hanging vertical, elastic control line, punching, mouth, re-inspection:

The outer layer is insulated, and the water brush should not be very good.

Exterior wall insulation workers are an important member of the construction industry, and their main responsibility is to carry out wide and balanced insulation construction on the exterior wall of the building to improve the thermal insulation performance and energy saving effect of the building.

As an exterior wall insulation worker, you need to have certain skills and knowledge, such as understanding and mastering insulation materials, familiarity with construction technology, mastery of safe operation, and so on. In their work, they need to carefully inspect the surface of the wall, choose the right insulation material, accurately calculate the thickness of the insulation layer, arrange the construction time reasonably, and always pay attention to the safety of the manuscript to ensure the safety of themselves and their colleagues.

Exterior wall insulation workers work in a difficult environment, need to work at high altitude or in a small space, and work for a long time, need to endure wind and sun, prevent heat stroke, avoid chemical damage, and so on. Therefore, exterior wall insulation workers need to have strong physical strength and endurance, and at the same time have correct operation methods and safety awareness to ensure their physical health and work safety.

Although the work of exterior insulation workers is hard, their work is of great significance to the development of the construction industry and environmental protection. Through their efforts, the insulation performance of the building has been improved, the energy consumption has been reduced, and the environmental quality has been improved. Therefore, we should respect and thank these dedicated exterior wall insulation workers, and at the same time, we should provide them with a better working environment and safeguards.

According to the building 05YJ101 specification, the exterior wall insulation needs to be painted before the external insulation sticker:

First: because the insulation board needs to be pasted on the wall, if it is not painted, the insulation board is not firmly bonded and easy to fall off, resulting in construction difficulties;

Second: when building the wall, the flatness and verticality of the wall can not be guaranteed, and the defects of the wall can be made up after painting, so that the flatness, verticality and beauty of the wall can be guaranteed after the insulation board is pasted;

Third: I don't understand the waterproofing mentioned upstairs, waterproofing is done in places that are often in contact with water such as roofs, canopies and bathrooms, and external insulation is on the exterior wall, the two are not the same thing at all, except for the shear wall basement Have you ever seen the entire exterior wall waterproof?

Finally, I wish the landlord a happy day!

It is recommended to do a good job of waterproofing, otherwise you will really have to peel off a few layers of skin in the future!