How to use the navigation system and how to use the car navigation system?

I've sold you this machine.!

When entering the navigation page, select A, or BAny one of them.

It is recommended that you use the map software of Kailide. It's more convenient.

After entering the Kailide map, click to find it. Adjust to handwriting mode. After what you see"Beijing"Click on this basket.

Then you can choose any place in the country. Select the point Chongqing, and then click All in the upper corner. After that, you will automatically go back to the place where you write, and then you will write a place name belonging to the city of Chongqing below.

or others. After writing, there is a query in the lower corner of the point navigation. Once the search is complete, on the left side of the navigation will appear some places related to the place name you are looking for.

You choose a place you need to go to and click on it. At this time, it will automatically rewind to the interface that entered the beginning of the navigation, You look at the upper left corner There are 3 rows of prompts, click it. Set as the destination.

Then select the recommended route. In the OK. Start navigating.

If you're setting it up at home, then you don't have to choose to start navigating. Just select Touch Navigated. Because if you choose to start navigation, then if you don't move, it doesn't move.

Touching the navigation can show you once.

Also, it's impossible for you to receive a satellite signal at home. Signal can only be obtained outside the room.

To determine whether there is a satellite signal on the Kailid map, the second icon in the upper corner of the navigation interface is a bit like a small pot lid.

Same thing. If there is a number on it, it means that the satellite signal is normal. You can click on it and check it out.

When the navigation receives a signal, the starting point does not need to be set by you, it is automatically located. You just need to set your destination. Click to start navigating and you're good to go. The prerequisite is to have a satellite signal. Real navigation to work.

Your navigator has two types of navigation software A and B installed. In general, point A is the "Kailide" map, and B is the "Intercity" map. (Specifically, A is the map, B is the map, you can set it yourself).

GPS receives satellite signals, which are generally not received in buildings, and can only be received outdoors.

Actual navigation,"Departure place" is not set up,The navigator defaults to your current location is the "departure place",When you use it, you just need to find the place you want to go and set it as "destination"OK。

Use the simulated navigation to query the route, and the "departure" and "destination" should be set, for example: how far do you want to find "Baotou - Haikou" in Beijing, and how to take the route? This is to set Baotou as the "departure place" and Haikou as the "destination".

Play a little more and you'll know.

You can find out where you are outside the door. Or you Itinerary Planner - Departure Destination - Select your city (if the system shows Beijing, you will click one level higher), and you should see Chongqing.

I specialize in navigators, free upgrades can come to me!

Different models and brands are used differently. But it's much the same. Generally, your location will be automatically searched, you just need to enter the name of the destination, and the software will automatically find or close to the location, and set the place as the destination.

Then use GPS to plan out the itinerary and start navigating.

The steps to use a car navigation system are roughly as follows (generally touchscreen):

1. Turn on the navigation switch button (usually on the far left, the button of the circle and the vertical bar).

2. After opening, the initial interface will be displayed (usually the radio station first), and then click the menu bar button in the interface (usually at the bottom left).

3. Click the "Navigation Bar" button in the menu bar, so that the system enters the navigation interface.

1. It should be noted that if the destination is in another place, you need to open the regional settings here to find the province or city where the destination is located.

2. Then find the place and set it as your destination.

3. Finally, click the navigation button in the lower right corner, and you can reach the specified destination.

4. It is recommended to buy genuine navigation as much as possible to prevent the unreasonable setting of the route, otherwise there will be many detours.

Many car owners have navigators, but they don't pay much attention to them when using them, which causes adverse effects. Pacific Motor**Bian Xiao will share with you the precautions for the correct use of the navigator!

Therefore, it is necessary to choose the appropriate navigation principle for the specific situation. If you have several highways in your itinerary and you plan to take as many highways as possible, you should set it to "take more highways"; If you don't plan to take the highway, you should set it to "take the high-speed less"; If your car has good off-road performance, you can choose the "shortest path"; Of course, you can also choose the "recommended route" and leave the power to the navigator.

2) After setting the route of the whole journey, set the destination in sections. When the first destination is about to arrive, the next destination is given in time, the long journey is broken down into several consecutive segments, and the new destination with the shortest distance is given in a row, so that the navigator can relay the guide one stop at a time.

3) We can't blindly trust the navigators, because the electronic maps on which the navigators are based are more or less behind the actual situation of the road, and some are even very old. Therefore, even if you have a navigator, you should bring a new version of the map. Before driving, you should have a good idea of the route.

If necessary, you should consult a local driver at the complex intersection. Only by combining navigators, maps, and asking for directions, and making the right judgment can we achieve the effect of reaching the destination smoothly.

4) People make mistakes, and the maps in the navigator and the voice commands that match the world can also rarely make mistakes (due to developer mistakes, of course). I've found that sometimes ** shows you turn right, but the scattering command asks you to turn left. In this case, the driver should make his own judgment and make a choice in time.

5) The most intolerable thing is that whenever the navigator encounters a situation that he can't handle by himself, it doesn't mean that he can't deal with it by seeking truth from facts, and will send a message asking the driver to make his own decisions. Instead, it causes crashes in the form of an internal error, which causes the entire navigation process to be in the middle section. This forces the driver to stop and reset the system and restart the navigation program.

This shows that the current commercial navigation equipment, from hardware to software systems are not mature and stable enough, and the update of electronic maps is a prominent problem, which needs to be studied and solved urgently by the industry.

Pacific Automotive Network ().

Millions of car purchase subsidies.

First, the common functions of car navigation system

Map query function.

You can search for the location of your destination on the operator terminal. You can record the location information of the places you often go to, keep it, and share it with others. Vaguely query your attachment or information near a location such as gas stations, hotels, ATMs, etcRoute planning function

The GPS navigation system will automatically plan a route based on the starting point and destination you set. Planning routes can be set whether or not they want to pass through certain waypoints. The planning route can be set whether to avoid high-speed and other functions.

Automatic Navigation

Voice Navigation: Use voice to provide drivers with driving information such as intersection steering and navigation system status in advance, just like a guide who knows the way to tell you how to drive to your destination. One of the most important functions in navigation allows you to reach your destination safely through voice prompts without having to operate the terminal.

Screen navigation: On the operation terminal, the map will be displayed, as well as the current location of the car, the driving speed, the distance to the destination, the planned route prompt, and the driving information of the intersection turn prompt.

Re-route: If you don't follow the planned route or take the wrong intersection, the GPS navigation system will re-route you to your destination based on your current location.

The following points should be paid attention to when using the navigator:

1: Do not expose the device to sand or dust.

2: It is forbidden for the navigator to use an overload power supply, bend it forcefully or squeeze the power cord with a heavy object, so as not to cause heat and cause fire.

3: Do not clean the navigator with chemical reagents or detergents, as this will damage the surface of the machine and corrode the paint.

4: In order to prevent electric shock, it is forbidden to plug in the power supply with wet hands, and the power plug is fully plugged into the socket.

5: Please do not charge the GPS in an overly cold or overheated place, as this may damage the performance of the battery.

6: Please keep the charging navigator out of the reach of children.

7: Please do not let the sun shine directly on the device, and do not put it in high temperatures, so as not to overheat the body, causing malfunction or dangerous conditions.

8: Put the equipment on a flat platform to work, avoid placing the equipment on blankets, pillows, carpets, etc. and let it be in working condition, because this will make the working temperature of the equipment may be too high, resulting in damage to the equipment.

9: If the navigator is faulty, do not disassemble the device by yourself, please send it to a professional maintenance personnel for repair.

10: Keep all cables securely and neatly connected to the navigator to prevent it from being damaged by falling due to a messy cable arrangement.

11: Don't press the LCD screen too hard. Do not expose the LCD screen to sunlight as it may cause the device to malfunction. Use a soft flannel cloth to clean the surface of the screen and remove dust.

13: Do not take out the memory card when the system is reading and writing the memory card.

Step 1: Turn on the navigatorAfter getting in the car, press the navigation switch to turn on the navigation device.

Step 2: Click on the menu barOnce opened, find the menu bar button on the interface and tap it.

Step 3: Click on the navigation iconAfter clicking on the menu bar, the "Navigation" icon will appear, click.

If you are out of town, you need to open the locale, find the province or city where the destination is located, and then enter the specific place name.

1. On the car display, find the option of "Navigation", and then click it to start navigation.

2. In the lower right corner of the navigation home page, there are all menu options, click once, you can appear the most frequently visited places, and you can also control the size of the map.

3. Start the vehicle, the red arrow in the screen indicates the location of the vehicle, and some signs around it can help the driver to be familiar with the driving environment, and there are voice prompts to pay attention to the road section.

4. When the vehicle reaches the end point, click the back option on the left side of the screen to return to the main page when the screen is turned on, and then turn off the screen of the car to end the navigation use.